Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Specifications
Inputs:
System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V
Absorbed power 0.1VA
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Respones time
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Function & Feature
1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input
signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Specifications
Inputs:
System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V
Absorbed power 0.1VA
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Respones time
Function & Feature
1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise
measurement.
2. Voltage transducer converts an ac voltage input into a load independent output signal.
3. Excellent temperature characteristic and good working stability.
4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence
the transducer can be used with distorted waveforms.
5. The unit conforms to IEC 60688. In a addition it meets the insulation requirements of IEC 60255-5,
clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test
voltage.
4322 Dc Voltage Transducer Bj Dpv Suppliers
Short on time? Let Dc Voltage Transducer Bj Dpv sellers contact you.
Function & Feature
1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise
measurement.
2. Voltage transducer converts an ac voltage input into a load independent output signal.
3. Excellent temperature characteristic and good working stability.
4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence
the transducer can be used with distorted waveforms.
5. The unit conforms to IEC 60688. In a addition it meets the insulation requirements of IEC 60255-5,
clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test
voltage.
Specifications
Inputs:
System voltages 100V,220V, 380V, 450V
Absorbed power 0.5VA
Frequency range 50Hz, 60Hz
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Ripple
Function & Feature
1. Isolate the DC input signal from the DC Output signal, which is directly proportional to the input signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Function & Feature
1. Isolate the DC input signal from the DC Output signal, which is directly proportional to the input signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
Function & Feature
1. Isolate the DC input signal from the DC Output signal, which is directly proportional to the input signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Function & Feature
1. Isolate the DC input signal from the DC Output signal, which is directly proportional to the input signal.
2. These isolators can be used to prevent earth loops, which occur when a measuring source
3. Excellent temperature characteristic and good working stability.
4. It have an advantage over loop powered units, in that if for any reason the output lead should become
disconnected, the input will not be saturated.
5. Fixed in a standard 35mm DIN rail or screwed on the cabinet.
6. Ultra-thin dimension, suitable for limited space, the control cabinet.
The one element DC multi-parameter digital transducer is used for measuring DC current, voltage and power parameters.Its inputs are DC current (output of mating transducer) and DC voltage, and its outputs are digital data of the DC current, voltage and power through RS-485 interface. It can be applied to various measuring and controlling systems such as communication, power grid and electrization railway etc.
This is a DC voltage and current transducer. The operating principle is Photoelectric Isolation/Treble isolation. It can measure DC voltage and DC current at the same time, and has two channels of standard signal. The input, output and power supply are isolated from each other. It's featured in high accuracy, high isolation, low drift and so on. This product can be used in railway, industry control, and other fields.
Rated input: 0~1-500V; 0~0.5-5A
Output signal: 0~5V DC (Vz); 0~20mA (Iz); 4~20mA (Iy);0~10V DC (Vd);OC frequency output:(0-5KHz/0-10KHz) optional
Power supply: 12V;15V; 24V; optional
Accuracy: 0.5% optional
Output ripple: 10mV
Isolation: 2500V DC
Humidity: â?¤95%(no dew)
Load resistance: Voltage Output >2kohm; Current Outputâ?¤250ohm
DC grid transducer isolate the DC input signal from the DC output signal, which is directly proportional to the input signal. These
isolators can be used to prevent earth loops, which occur when a measuring source.
It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will
not be saturated. With excellent temperature characteristic and good working stability.
Main features
·Input: DC grid customized input
·Output: 0-5V,0-10V,4-20mA, 0-20mA optional (One channel)
·0.2/0.5 measurement accuracy
·100ms response time(T type 1s/500ms)
·Minimum thickness of size (T type)
·35mm Din rail mounting
·Rs485 port optional
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Function & Feature
1. QPPX electrical transducer measures a wide range of electrical parameters and generates analog or
digital output signals suitable for interfacing with instrumentation and control systems. Total four
channel output, with panel key or PC control programmable, user can free to set 4 different data from
max 26 electrical parameter for sampling and analog signal output.
2. Have three channel digital inputs and optional RS485-Modbus communication functionality. Can
monitor the galvanically isolated DI signal and programmed the transducer with customized SCADA
software. Any of the measured parameters can be read out via the optional RS485-Modbus
connection.
3. QPPX also can be used to configure the connection to the measured circuit for single-phase,
three-phase three-wire, three-phase four-wire, balanced or unbalanced load. Can be connected to a
variety of measuring and control devices and systems, such as analogue meters, PLC, computers,
data loggers, digital instruments and telemetry systems.
4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584
Function & Feature
1. QPCX electrical transducer converts ac current and voltage signals into a load independent dc signal
proportional to active power (watt), reactive power (var) and power factor (PF). With an extra output
channel for customized. Total four channel output for electrical data sampling use.
2. The current and voltage signals are passed into the circuit via precision instrument transformers to
provide galvanic isolation between the input circuits and the transducer circuitry. Each pair of current
and voltage signals is mathematically multiplied together to produce a product signal proportional to
true power and independent of wave shape and phase angle.
3. This combination transducers with RS485 communication port, it can be connected to a variety of
measuring and control devices and systems, such as analogue meters, PLC, computers, data loggers,
digital instruments and telemetry systems.
4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584
Function & Feature
1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise
measurement.
2. Current transducer converts an ac current input into a load independent output signal.
3. Excellent temperature characteristic and good working stability.
4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence
the transducer can be used with distorted waveforms.
5. The unit conforms to IEC 60688. In an addition it meets the insulation requirements of IEC 60255-5,
clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test
voltage.
Specifications
Inputs:
System current 1A, 5A, 10A, 30A
Absorbed power 0.3VA
Frequency range 50Hz, 60Hz
Output:
Standard nominal outputs 4~20mA, 0-5V,
(others on request) 0-20mA,
5-10V
0-10V
Ripple
Function & Feature
1. QPCX electrical transducer converts ac current and voltage signals into a load independent dc signal
proportional to active power (watt), reactive power (var) and power factor (PF). With an extra output
channel for customized. Total four channel output for electrical data sampling use.
2. The current and voltage signals are passed into the circuit via precision instrument transformers to
provide galvanic isolation between the input circuits and the transducer circuitry. Each pair of current
and voltage signals is mathematically multiplied together to produce a product signal proportional to
true power and independent of wave shape and phase angle.
3. This combination transducers with RS485 communication port, it can be connected to a variety of
measuring and control devices and systems, such as analogue meters, PLC, computers, data loggers,
digital instruments and telemetry systems.
4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584
Specifications
Inputs:
Nominal input 1 or 5 Amp C.T. connected
110V, 230V, 240V, 400V, 415V ac +/-20%
Power consumption
Function & Feature
1. QPPX electrical transducer measures a wide range of electrical parameters and generates analog or
digital output signals suitable for interfacing with instrumentation and control systems. Total four
channel output, with panel key or PC control programmable, user can free to set 4 different data from
max 26 electrical parameter for sampling and analog signal output.
2. Have three channel digital inputs and optional RS485-Modbus communication functionality. Can
monitor the galvanically isolated DI signal and programmed the transducer with customized SCADA
software. Any of the measured parameters can be read out via the optional RS485-Modbus
connection.
3. QPPX also can be used to configure the connection to the measured circuit for single-phase,
three-phase three-wire, three-phase four-wire, balanced or unbalanced load. Can be connected to a
variety of measuring and control devices and systems, such as analogue meters, PLC, computers,
data loggers, digital instruments and telemetry systems.
4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584
Specifications
Inputs:
Nominal input 1 or 5 Amp C.T. connected
110V, 230V, 240V, 400V, 415V ac +/-20%
Power consumption
4322 Dc Voltage Transducer Bj Dpv Suppliers
Short on time? Let Dc Voltage Transducer Bj Dpv sellers contact you.
