1. Steel wire of 2mm diameters inside
2. Good choice for boundary wall
3. Save labor only3 to 4 workers needed
4. Good productivity of 1.6m/min in length of wall panel
Technical parameters:
Thickness of panels: 90mm
Width of panel: 600mm
Molding speed: ,161;,221; 1.4m/min
Capacity: more than 500m,178; /8h
Motor power: 4kw
Vibration power: 0.8kw
Panel weight: 70kg/m,178;
Dimension: 2470*950*680mm
Mass: 1031kg
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Cherry Olive Date Core or Seeds Removing Machine are necessary machine for fruit process .
Fruit Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi plum /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Olive Cherry Date seeds Removing Machine
Fruit seeds stone Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear stone removing machine
Longan /Automatic stone core removal machine of large-scale red date
automatic jujube type /Hawthorn / Beach date /Prunus cherry and so on ...about 20-40kind fruit can be stone removing machine
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Fruit Stone Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
Fruit Seeds Removing machine series fruit different capacity different ,machine are little different )
Apricot kernel remover stone /core removing machine
Peach core remover
Apricot,Peach,Jujube nut removing machine
Red date/Peach and apricot /Green plum /
Cherry /Hawthorn /Sandberry /Iraq date /Date de /Marinated peach kernel machine
Olive /Li Zi /Nut and butter/Litchi/ Pear nuclear machine
Longan /Automatic nuclear removal machine of large-scale red date
Semi automatic small jujube type /Hawthorn / Beach date /Prunus cherry and so on ...
Technology advantage :
1. The full-automatic equipment has high degree of automation. The mold conveyor belt can automatically feed and send materials to carry out transportation and core flushing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and flesh. It can work continuously and solve the problems of low efficiency, labor-consuming and time-consuming of manual core removal.
2. The structure of the machine is composed of stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during start-up and operation. All parts are assembled with bolts, which makes the operation and maintenance of the equipment more convenient.
3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane material, which is wear-resistant, tensile, tear resistant and has a longer service life.
4. The operation of the machine is simple and convenient, without long-term care. One person can manage multiple machines at the same time. The transmission system adopts advanced design concept and standardized components. The principle of core punching adopts the process of machine tool to punch the core, so that each equipment meets the high design standard, so that the effect of core removing is good, and the fruit shape is completely unchanged.
1). Size: 25mm*25mm-250mm-250mm
2). Wall thickness: 1.5mm-25mm
3). Length: 1m-12m
4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc
4). Certificate: ISO 9001-2008
5). Packing: Standard exporting package.
6). Delivery: Within 20 days after receiving the deposit.
7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
it is mainly used for color cement, color cement floor tiles, color cement tiles, imitation glazed tiles, concrete floor tiles, color mortar, color asphalt, terrazzo, mosaic tiles, artificial marble and wall painting.
2. It can be used for colouring and protecting substances of various coatings, including water-borne interior and exterior wall coatings, powder coatings, etc. It can also be used for various primers and topcoats such as epoxy, alkyd, amino, etc. in oily paints, as well as for toy paints, decorative paints, furniture paints, electrophoretic paints and enamels. Iron red primer has anti-rust function, can replace high-priced red red paint, save non-ferrous metals.
The manufacturer supplies iron oxide red, iron oxide green, iron oxide blue, iron oxide yellow, iron oxide violet, iron oxide brown, iron oxide black and so on. The color is complete, the quantity is large and the discount is favorable. Support mixed batches. Welcome to call for consultation.
We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it!
The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process
Eliminates: Skilled labour associated with hanging doors
Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs
Eliminates: Labour associated with fitting locks
Eliminates: Mitre cuts required for skirting and architraves
Eliminates: Gap filling sealant around skirting and architraves
Eliminates: Cut-in painting around skirting/walls and architraves
Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs
Eliminates: Trimming door jamb & window reveals
Resulting in increased productivity & cost savings
THE INTER-JOIN DIFFERENCE
DELIVERING A HIGHER QUALITY FINISHED PRODUCT
SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS
MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS
ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS
BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY
REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING
ELIMINATION OF FINISHING DEFECTS
MATERIALS ARE 100% TERMITE RESISTANT
MATERIALS ARE WATERPROOF
DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION
All Door Units are pre-finished, assembled and ready for immediate installation
Residential door manufactured from completely waterproof composite (WPC & Wooden) material
Residential doors are available in varying styles and designs
Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
PC-950 paper cup machine is improved based on the normal chain driving type. This machine is based on Open Cam System(No Gear Box).This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom punching, heating, rolling, rimming, rounding and tripping.
It is an ideal equipment for producing drinking cups, market cups, coffee cups, advertising cups , etc. It is widely used for hot drink and beverage. If you need double pe coated paper cups or paper gram higher 250g/m2, we recommend you to use Ultrasonic paper cup machine. It can produce single pe coated paper cups and double pe coated paper cups.
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide
Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu.
There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness.
Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3
Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits.
We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains.
These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
ShaiTech Precast Concrete Walls
Precast Concrete Walls Are An Efficient Alternative To Masonry and Wood
Traditional materials such as wood bamboo wrought iron brick or concrete block are prone to deterioration due to ground movement weather environment temperature and insects However a precast concrete wall endures with very little maintenance
The Benefits of Precast Concrete Walls
Extremely durable and stable
Low maintenance
Easy to color and customize
Moderately priced building material
Not affected by insects
Available universally
Can be formed into many designs
Capable of being engineered for most any application
Several Methods Of Attaching The Columns To
The Caisson Footings Include Precast concrete or steel columns are embedded into the caisson footings extending up to the height of the wall and then the panels are stacked into the column grooves to the wall height
Grouted cell connection whereby a column with a center void is placed over a caisson footing with protruding rebar and once the columns are set in place and shoredbraced concretegrouting is then poured into the void to secure the column to the foundation
On shorter walls the panels are usually set prior to grouting the voids in the columns On taller walls the columns are usually grouted and allowed to cure before setting the panels
Mechanical connection whereby the column has mechanical fasteners fabricated into the column which attach to embedded fasteners cast into then caisson footings
ShaiTech Stonemaker developed Design whereby a structural rigid support is embedded into the caisson footing extending up to support the ShaiTech Stonemaker columnpanel fence wall section
precastconcrete
Precastbounderywall
lowbudgethouse
Bangladesh
DevelopmentForAGreenFuture
Best quality precast boundary wall
Panel size 6x1x2
H shape pillar size As per client requrements
Raw materials Aggregate Red Sand Sign Sand High Tension wire Portland cement Add mixers water etc
We are leading supplier and manufacturer of Precast Boundary Walls in Jharkhand, Working in major sectors like Construction companies and other corporate sectors
Precast Boundary wall manufacturer
With Largest Product range, We are Precast Boundary Wall manufacturer and Provides installation service of Precast Boundary Wall in Daltonganj, Garhwa, Jamshedpur, Dhanbad, Bokaro, Deoghar, Phusro, Hazaribagh, Giridih, Ramgarh, Sahebganj, Chaibasa, Dumka and major cities across India.
