1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
2355 35Mm F 2 8 Di Iii Osd Lens F053 Suppliers
Short on time? Let 35Mm F 2 8 Di Iii Osd Lens F053 sellers contact you.
TRANSACTION WORKING PROCEDURES CIF DELIVERY
1 Buyer issues Irrevocable Corporate Purchase Order (ICPO).
2. Seller issues SPA to Buyer. Within 48 hours Buyer signs seals and returns the SPA to seller.
3. Seller notarizes the contract, at its own expenses and submits Partial Proof of Product (via email) as follows:
A) Refinery Commitment to Supply
B) Product Passport
C) Certificate of Origin
D) Export license
E) Proforma invoice for the first month of value
f) Statement of Availability of Product
h) Company Registration
4. Within 5 banking days, Buyer's bank sends Irrevocable Operative SBLC via MT760 or DLC via MT700 according to seller's fiduciary bank
verbiage to seller nominated fiduciary offshore bank account for first month shipment,
5. Seller's Bank issues Full POP Documents to the Buyer's Bank alongside with 2% Performance Bond (PB 2%).
6. All parties finalized the signing of the NCNDA/IMFPA. The buyer will be invited by the seller to witness the loading of the product (At
Buyers Cost, Maximum of Five Personals/Representatives, Optional).
7. Seller clears vessels from the commercial's terminal (Loading Port), the buyer confirms shipping documents with ship master while
seller effects delivery to buyer destination
8. Upon the arrival of cargo at the discharge port, and after SGS/Q&Q at discharge port buyer's bank release to seller's bank payment by
TT/MT103 within 7 (Seven) banking days. Seller release payment to all intermediaries as per signed NCNDA IMFPA within 48 hours.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max
Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
2-row tortilla making machine thin pancake making machine chapatti making machine food making machine equipment machinery
hot selling ,can equipment the automatic turning tortilla part ,equipment the automatic grabbing tortilla machine ,which are sanitary working save labors cost ,low investing high profit!
2-row tortilla diameter 8-35mm, different size capacity different .with cooked meat vegetable sauces are very delicious for people eating all over the world .
Our this machine exported many countries : Turkey ,Mexico, France, Canada, South Korea, Japan, Italy, Middle East countries .
welcome order!
tortilla making machine also can produce Roti, Tortilla, Chapati, Pita
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one
Other Names: D-allulose, D-ribo-2-hexulose
Appearance: White Crystal Powder
CAS Number: 23140-52-5/551-66-8
Chemical Formula: C6H12O6
Molar Mass 180.16 g�·molâ??1
Melting Point 58 �°C (136 �°F; 331 K)
Function of Allucose
1. Low-calorie sugar
2. No effect on blood sugar
3. Can be part of a healthy diet
4. The taste and Texture of sugar, without all the calories
5. Contributes far fewer calories (approximately 90 percent less) than sugar
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one
Other Names: D-allulose, D-ribo-2-hexulose
Appearance: White Crystal Powder
CAS Number: 23140-52-5/551-66-8
Chemical Formula: C6H12O6
Molar Mass 180.16 g�·molâ??1
Melting Point 58 �°C (136 �°F; 331 K)
Function of Allucose
1. Low-calorie sugar
2. No effect on blood sugar
3. Can be part of a healthy diet
4. The taste and Texture of sugar, without all the calories
5. Contributes far fewer calories (approximately 90 percent less) than sugar
Phosphoric Acid, E338, CAS no.7664-38-2, a mineral acid, colorless, transparent syrupy liquid. Phosphoric Acid is an acidity regulator and nutrition agent for yeast food, and it applied to flavors, canned food and light drinks as well as used in wine making.
As an experienced Phosphoric Acid manufacturer and supplier, we has been supplying and exporting Phosphoric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Diammonium Phosphate, E342, CAS no.7783-28-0, also known as DAP, is an ammonium salt of Phosphoric Acid, available as White Crystal. Manufacturing process via chemical synthesis, Ammonia and Phosphoric acid as raw materials. Diammonium Phosphate is often used as a yeast nutrient in wine making and brewing mead, mainly used as a fermentation agent.
As an experienced Diammonium Phosphate manufacturer and supplier, we has been supplying and exporting Diammonium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Diammonium Phosphate Specification
No. standard name industrial grade food grade
1 Main content(as (NH4)2HPO4)% 99.0 99.0
2 Phosphorus pent-oxide(as P2O5)% 53.0 53.0
3 Nitrogen(as N)% 20.8 20.8
4 PH value 7.8-8.2 7.8-8.2
5 Moisture% 0.2 0.2
6 Heavy metal(as Pb)% 0.001
7 Arsenic(As)% 0.0003
8 Fluoride(as F)% 0.005
9 Water insoluble % 0.10 0.10
Monoammonium Phosphate, E342, CAS no.7722-76-1, also known as Ammonium dihydrogen phosphate, a salt of phosphoric acid manufactured through chemical synthesis, ammonia and phosphoric acid as raw materials. Properties: white crystalline powder, soluble in water. Monoammonium Phosphate (Food Grade) is used in food as a pH control agent, buffering agent, acidulate, and nutrient source. Also in bread and dough, dry powder beverages, eggs, isotonic beverages, mineral supplements, starter cultures and yeast cultures.
As an experienced Monoammonium Phosphate manufacturer and supplier, we has been supplying and exporting Monoammonium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Monoammonium Phosphate Specification
No. standard name industrial grade food grade
1 Main content(as NH4H2PO4)% 99.0 99.0
2 Phosphorus pent-oxide(as P2O5)% 61.0 61.0
3 Nitrogen(as N)% 11.8 11.8
4 PH value 4.4-4.8 4.4-4.8
5 Moisture% 0.2 0.2
6 Heavy metal(as Pb)% 0.001
7 Arsenic(As)% 0.0003
8 Fluoride(as F)% 0.005
9 Water insoluble % 0.10 0.10
5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless.
6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely.
7, Side rail:
1),Two side rail in each side of bed.
2),It can be automatically locked when raising, and each guardrail can bear more than 50KG.
3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient;
4), Equipped with gas spring for easy operation.
5), The steel structure of the guardrail base is welded on the bed to ensure safety.
6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed.
7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed.
8, Casters
1), The four casters use 125mm center control one.
2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg
3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking.
9, Shank board can be adjusted manually by simple steel support for convenience position.
10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board.
11, There are 1 hook in each side for drainage bag.
12, It equipped with manual CPR for emergency treatment.
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer and supplier of Whitening Agent Optical Brighteners for pulp and Paper Industry.
We all want our papers to be as white as possible, don't we? Well, that's where Whitening Agent BRIGHTOMNI BBU Powder & Liquid come in.
We supply Tetra Sulpho and Di Sulpho Optical Brighteners in Liquid and powder form.
The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.
We have various Whitening Agent Optical Brighteners Available for Paper application like...
Optical Brightening Agent BRIGHTOMNI BBU-L in Liquid form, Optical Brightening Agent BRIGHTOMNI BBU-P in powder form, Optical Brightening Agent BRIGHTOMNI UP Liquid Optical Brightening Agent OBA 24 in powder form Fluorescent whitening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
E,Commission Structure
1-$ 20 Starting from you
2-Can mark up 60%/ 40% Buyer /Seller
F:Quantity 1M-50M X12 month
G-Great advantage of the project
1-NO REDACTED PASS PERFORMNCE &SGS
2-2-3M /MT OTG AVAILABLE
3-U.S. law firms fully cooperate
4-Provide some Q88 not Redacted files
5-High-quality sugar, the price is seriously below the market price,
6-Provide a complete manual and a full set of relevant information
H-SOP:
1,NCNDA, ICPO ,KYC
2,Draft SPA
3,SPA Signed & IMFPA Signed
4,ZOOM CALL FOR PASS PERFORMANCE &BOL-SGS -Q88-Video Share
5,PAYMENT TERM :LC /TT/BG/SBLC -
6,Payment Term
1-DLC CIF then Release TT
2-SBLC /BG DDP PAY TT
Seller refund issye fee &pay 5% Performance Bond to Buyer after verifiction
3-TT PAYMENT -Up front 5% -buyer offer Q88 and ALL SGS BOL information
7-inspection pay buyer port /warehouse
8-Rolls & Extensions
I-Notice-
I-Seller/Title -ABO INTERNATIONAL LTD /Brazil Si GROUP
Price valid time: Starting from May 29, the price will start to change after a week
2355 35Mm F 2 8 Di Iii Osd Lens F053 Suppliers
Short on time? Let 35Mm F 2 8 Di Iii Osd Lens F053 sellers contact you.
