COIRMESH Coir (Coconut fiber), is made from well cleaned, high strength, fresh water cured coconut fiber . Coconut fiber is extracted from coconut husks which are submerged in fresh water streams or storage tanks for a period of several months. During this process known as retting, water constantly flows through the coir fiber matrix removing impurities present in the fiber. The clean fiber is extracted and spun into yarn which is then woven into Coir Mat. Coir Mat erosion control matting is highly versatile with a wide array of applications in bioengineering and erosion control. Coir Mat by far exceeds the demand for an environmentally friendly and economic erosion control product.
Coir Logs 100% biodegradable, flexible, cost-effective sediment control system. Coir Logs are strong and flexible and designed to aid in stabilization and re-vegetation of sites. Coir logs are often used on steep slopes or areas with exposure to waves or currents which cause instability on a site. Features & Benefits Maximum erosion prevention Stable Substrate Promote root growth Self Maintaining Durable alternate to hay bales/logs. Longevity Depending on its application and exposure, Coir Mat lasts two to five years. This extended longevity period allows enough time to establish adequate vegetation allowing erosion control the way nature intended.
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zones. In producing of this membranes, APP (Atactic Polypropylene) with thermoplastic resin is used in order to enhance the bitumen. Fibreglass tissue and non-woven polyester mat is used as a carrier in order to reinforce to membrane. Application Area Bituminous membranes can be applied in all areas where water can affect the structure such as walls which have contact with ground, foundations and layers with the ground. They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets. Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many ways a better economical and aesthetic solution. Cold Bending -5 °C Temperature Resistance (Minimum) 110 °C Breaking Point (Fraass) -15°C Features POLYETHYLENE FILM APP ADDED MODIFIED BITUMEN GLASS TULLE AND POLYESTER FELT CARRIER APP ADDED MODIFIED BITUMEN POLYETHYLENE FILM It keeps its good adherence even after application and it is definite solution for all waterproofing problems especially in the basement applications. It can be applied all different surfaces like wood, cement and metals. It has shows enhanced elasticity against transversal and longitudinal structural movement. It also stands against building movements and structural expansion differences. Our membranes neither dissolve or discharge in warm weather conditions. They do not crack in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes. The Penguen Series are suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are as durable as the life of the building given that they are applied correctly.
PENGUEN Serial Waterproofing Membranes are plastomeric type that are the ideal preference for mild climate zones. In producing of this membranes, APP (Atactic Polypropylene) with thermoplastic resin is used in order to enhance the bitumen. Fibreglass tissue and non-woven polyester mat is used as a carrier in order to reinforce to membrane. Application Area Bituminous membranes can be applied in all areas where water can affect the structure such as walls which have contact with ground, foundations and layers with the ground. They can also be used in external walls which is below of the water level , balconies, terraces, bathrooms and toilets. Additionally they can be used in the structures for water reservoirs, artificial ponds or resting walls. It provides, in many ways a better economical and aesthetic solution. Cold Bending -5 °C Temperature Resistance (Minimum) 110 °C Breaking Point (Fraass) -15°C Features POLYETHYLENE FILM APP ADDED MODIFIED BITUMEN GLASS TULLE AND POLYESTER FELT CARRIER APP ADDED MODIFIED BITUMEN POLYETHYLENE FILM It keeps its good adherence even after application and it is definite solution for all waterproofing problems especially in the basement applications. It can be applied all different surfaces like wood, cement and metals. It has shows enhanced elasticity against transversal and longitudinal structural movement. It also stands against building movements and structural expansion differences. Our membranes neither dissolve or discharge in warm weather conditions. They do not crack in the cold weather conditions and can be easily used with the help of blow torch. It is easily applied with cutting special cutters according to necessary sizes. The Penguen Series are suitable for using in dilatation, concrete structures, parapet turns and chimneys. They are as durable as the life of the building given that they are applied correctly.
We work very responsibly & maintain integrity, honesty & transparency in all our business dealings. All our products meet VOC compliance & are non-diluted. In very simple words, we believe honesty in business, is the best policy for growth in business.
HDPE geomembrane is produced from high density polyethylene resin by film-blowing process, adding carbon black, antioxidant, anti-aging and UV-resistance component. Now it is the most widely used products for solid waste containment (such as landfill liners), mining and water containment applications.
Mfrs of Led Driver Led Controller SMPS Power Supplies for CCTV Camera Security Systems Switching Power Supplie Battery Charger DCDC Converter Transformer Medical Power Supply Switching AdaptorsSolar Products E Bike Charger Lithium Charger Car Inverter UPS & Inverter Cvt Best regards Sincerely yours Amarjit Singh MOBILE: 094160 20078 092157 20078
Geo Textile Netting made of Natural Coco Fiber in White or Brown Coir. (Machine or Hand woven). Used to control Soil Erosion, at work sites, road construction areas, river banks etc.. as a protective measure/Mesh. Can be used as backing for hydro seed spraying. Specifications Mesh Hole size : 20mm x 20mm or 30mm x 30mm or (As per buyer’s requirement for any pattern and size) Supplied in rolls any length and any width (up to 2 meters of maximum width).
Manufactured by Longxing Company, the 2in1 oxygen barrier film is designed to reduce fermentation losses and minimise mould formation while conserving high-quality filling. Silage can be covered much faster and the process is less expensive than with conventional silage films. Because the polyamide underlay film is attached to the silage film, this kind of silage film can be applied in a single step. The adhesive underlay film allows for the diffusion of moisture, yet also forms a significantly improved oxygen barrier. The underlay automatically separates from the silage film after a time, adhering to the surface of the silage during fermentation. Using one film instead of two saves on transport, warehousing and labour. There are also environmental savings over conventional films: 40% less raw material used during manufacture and 50% less packaging. The product has been field-tested and positively received by farmers. 2 In 1 Option 4 mil Silage Sheeting & 1 mil Barrier Film in a single roll Unroll and Unfold both films in one fast and easy operation 4 mil holds down the 1mil Barrier Film during installation
Geo textile Geo-sheet, Geo-bag & Geo-tubes Buyer Description
Excellent UV-resistance and anti-weathering performance High workability and weldability High mechanical resistance Excellent anti-aging Excellent low-temperature flexibility High vapor permeability Excellent solar reflection performance for smart white color
Polythene polymer Compound Waterproof Membrane High polymer polyethylene polypropylene compound waterproof membrane is made from non-woven fabrics,polypropylene and high grade Polyethylene raw material, is a kind of compound type waterproof material with 4 layer flaky materials of enhanced protective layer, ageing resistance layer, waterproofing layer and tackifying and enhanced layer by adding additives . High polymer polyethylene polypropylene compound waterproof membrane is made by multiple-ply different materials, so its performance has been enhanced significantly, especially its aging and weather resistance layer enables the membrane possess more longer service life with up to 50 years. Both the upper and lower surfaces of it is rough, and non-woven fibers were irregular cross-structure to form three-dimensional mesh so that it has high tensile strength, permeability and good low temperature flexibility, small swelling and friction coefficient and low temperature effect, with strong deformation adaptability, which can be used in conjunction with a variety of adhesives and has a good bonding effect. High polymer polyethylene polypropylene compound waterproof membrane is a series of polyethylene resin for waterproofing membrane, and it is a non-toxic, pollution-free green product Fields of application: The series-XM115-150 multilayered polymer polyethylene fiber waterproofing membrane is suitable for various industrial , civil building roofing , underground waterproofing, and metallurgy , chemical industry , water conservancy, environmental protection , mining and other seepage control projects. Wet laid method: Base plane treatment ? Scraping coat and preparation polymer cement slurry (sand) ? Node details treatment (attached layer) ? Laid waterproof membrane ? half header treatment ? The waterproof layer inspection ? protective layer's construction
The sbs modified bitumen waterproof membrane is in polymer modified bitumen for coating,long fiber polyester fiber felt for tire body,metal foil,fine for finish,polyethylene film for isolation layer of a kind of soft waterproof material.Mainly used for high speed railway bridge deck waterproof,this product has good performance, and waterproof construction simple characteristics. Features: 1) APP/SBS modified bitumen waterproof membrane: a) Conforms to the national standards b) SBS modified bitumen waterproof membrane is specially used as waterproof material in cold area c) APP is specially suitable for areas of high temperature and of strong sun-shine Item APP/SBS modified bitumen waterproof membrane Brand Xinlei Waterproof Grade FirstSecond Base PY G Cover PE S M Al Thickness/3/4mm Color Black PE film(or other colors) Yellow/green/other Fine Sand Grey/Green/other MineralGrains/Flakes Aluminum Foil Notes PY------Polyester Base G-------Glassfibre Base
Advantages of SBS Self Adhesive Waterproofing Membrane 1) Unique self-healing function 2) Strongcohesion with base surface 3) Superiorbond strength between membrane and membrane 4) Excellentelongation that can adapt base surfacedeformation and cracking 5) Simple in construction Application of SBS Self Adhesive Waterproofing Membrane 1. Building roof (Non-outer appearances) 2. Basements, tunnels, pools and other water projects 3. Non-exposed roofing projects that can not use fire to performance
Zena-seal (zswp100) single ply black membranes are light weight and have exceptional long lasting elasticity permitting the materials to withstand building movement, expansion - contraction of building surfaces, high resistance to ozone and weather as they are known as “crack-less rubbers”, low specific gravity - lightest among all rubbers, widest temperature range from - 50°c to + 150°c, excellent steam and water resistance. 1.2mtr wide and 10mtr long
With the experience of several years in rubber industry zenith has now entered in inflatable products section and introduced range of products which include air cell, gas holder balloon, inflatable work boats and life rafts. Units basis.
High quality , competitive price , china top brand Self adhesive polymer modified bitumen membrane Thickness : 1.2mm 1.5mm 2.0mm Width: 1000mm
Description: A heavy-weight asphalt roofing felt made of a specially formulated organic sheet which has been fully saturated With waterproofing asphalt. Uses: A roofing felt used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Storage and handling: Asphalt saturated organic felts require protection form damage and the weather. Store rolls upright in a dry Location and never install when wet or over a wet roof deck. Physical specificatons: Average roll weight, lbs/roll:54lbs Packed in rolls with pallet
Material:bitume Size:1*10m
what is waterproof membrane-ram-cl reactive adhesive crossing-laminated membrane? 3.Apple green facial film eliminates light pollution compared to silver white surface. 4. Adaptability to weather change from hot area to cold district, good adhesion in special-shaped part with no empty hollowing. How about the specification? Materialscrossling-laminated hdpe, high polymer adhesive, asphalt Thickness1.2mm; 1.5mm; 2.0mm Width1.0m Length20m/roll or customized Surfaceapple green, other color need to be confirmed Packingwoben bag with hongyuan logo on packing material Packing detail: plastic film pallet Delivery detail: 5~7 days
