Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000 The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap. we can also provied : rebar steel hot rolled steel sheets Galvanized steel billet steel cold steel Rolled sheets procedure : 1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below. 2/Seller issues FCO (available 7 days) 3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal. 4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank. 5/Paiement terms : By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer. or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice. Possibility to negociate with DLC. 6/ Seller issues a SPA the buyer must be returned ywith 7 days. 7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
PRICE & ORIGIN RAIL SCRAP & HMS-1,R TOO-EXPENSIVE & IncLUSIVE can be in possession,of abv-RAIL.SCRAP,in 24- hrs-of ur filling up of- enclosed
R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. b) R65: used long rail steel scrap in compliance with ISRI standard classification R65 (64.72 kg/m), in length 1 & 1,5meters on per bar basis. HMS 1/2 STEEL METAL SCRAP FOR SALE: Iron scrap HMS1 & 2 C: 0.06-0.082% Mn: 0.75-1.05% SI: 0.13-0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% R - 50 [ 51.67Kg/M] and R -65 [ 64.72 Kg/M ] grades as per ISRI 027-029 and GOST 7173-75 / GOST 8165-75, Cut to length [in buyers option ]
Origin: Saudi Arabia MOQ: 50,000 MT Payment terms: DLC or SBLC Non transferable payable at Destination Port. Performance bond 20%
Hallo We Can Offer Used Rails - Origin - Kenya And Europe Moq - 25000 Mt Supply Capacity - 100000 Mt X 12 Month Payment - Sblc /dlc - Payable At Destination Afetr Sgs Pb 2% By Seller We Are Serious In This Trade And We Expect People Who Serious To Buy - No Formal Enquires Please Need Loi From End Buyer - We Provide Pop Against Bcl Or Pof Seller Kyc Can Provide - Buyer Kyc Need To Provide
R50 GOST 7173-75 Weight 51.67 KG/Meter R65 GOST 8165-75 Weight 64.72 KG/Meter CHEMICAL COMPOSITION: C: 0.60 -0.82% Mn: 0.75 â?? 1.05%
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 â?? 1.05% Si : 0.13 â?? 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After clientâ??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyerâ??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to sellerâ??s nominated bank account within 48 hours after receipt of the final assay report from buyerâ??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
special offer Origin: Saudi Arabia Product: HMS 2 Second Quality Rails Quality: MTC R65 - R50 - 49E1(S49) HS Code: 73.02.100 ISRI Codes: 27-29 Available sizes: 0.80m up to 12.5m MOQ: 200,000 MT Shipping: Bulk Vessel Shipment Quantity per Month: 50.000 or 100.0000 or spot 200.000 Loading Port: Jeddah price 220 $ +commission 10$ CIF payment terms SBLC MT760 -LCMT700 DLCMT 700 There are no down payments and fees, only proof of financial ability Bank to Bank only ...
A wide selection of rails wholesale at favorable prices We have the following rails in our assortment: - Railway R43, R50, R60 , R65 (GOST 7173-54 and GOST R51685-2000) - Narrow-gauge P8, P11, P18, P24 (GOST6368-82 and DSTU 3799-98) and European analogues S10, S24, S18 - Mines R33 (TU 14-2R-383-2004), R34, R38 (GOST 7173-54) - Cranes KR70, KR80, KR100, KR120 (GOST 4121-96) - Trams LK1, 62R1, 62R2 There is a selection of new, lying and used rails with minimal wear. We also have accessories for rails: - Wooden and reinforced concrete railway sleepers - Arrow translations - Reinforced concrete transfer bar - Overlays on rails - Rail linings - Road bolts - Road nuts - Spring track washer - PC intermediate terminal - Road crutch - Track screws - Gaskets railway HTV - Rail fasteners for the crane - Joint insulation for rails - Railway counter-theft - Road tools - tools with which the road is mounted
Used and Second quality railway tracks available from Saudi Arabia and Africa. Please get in touch for further details.
Rail road track we company has the qualification of general contracting of housing construction engineering, first-class engineering contracting, general contractor of construction, general contracting of road construction and general contracting of municipal engineering. There are hundreds of engineers and materialman. Products and services include road, railway, tunnel, municipal engineering, design consulting, steel structure, real estate development. we sell cold rolled steel coil, hot rolled flat steel, billet, steel rail, carbon steel, stainless steel, special steel, rigid bar and wire rod, galvanized steel, angle steel, construction steel, Steel plate, roof, iron fence, aluminum alloy, H-beam, channel steel, square steel, steel pipe, steel wire, I-beam, angle steel, rebar, billet, wire rod and other steel materials, Copper, tin, aluminum, magnesium, tungsten steel�¯�¼?building glass, tempered glass, doors and windows, plywood, ceramic tile, Air conditioner, elevator, escalator, Pipes, asphalt, Cement clinker, Solar electromagnetic panel, Smart home, the price is cheap. Welcome to purchase our services and products .
Hard and soft commodities wheat, used rail scrap.
Railways scrap metal r50/r60/r65 : second quality railway used rail steel no. 1. standard section tee rails, original weight 50 pounds per yard, over heavier, 120.50 m rails. steel no.2. cropped rail ends, standard section, original weight 50 pound per yard and over 12.50 meters long. 28)b) (28c) rail steel no.2 t rail ends standard section original weight 50 pounds per yard and over 12.50 pounds per yard and over 12.50 meters rail, steel no.3, standard section fee, gender, and / or guard rails, free from frog and switch rails not cut apart, and contain no manganese, cast, welds or attachment any kind except angle bars also rails, not found and without radiation and explosive substance... 1.0m ( 1.0 1.5m( rail ferrous (r 50/ r65 chemical composition..
Used rail scrap.
Used rail.
Rail scrap.
Used rail scrap r50 and r65 copper powder 99.998% purity available 3,900 kg thermal nickel wire ni purity 99.96%, gost 3885 73, 7.6 million meters (in rolls)..
The used train rails will fit R50-R65. Composed of rails for steel making that match GB/T 39733-2020 Quality Standard of steel and iron material recycling (Rail), with HS Code: 73021000. We provide quality used train rails that will conform to the International Standard Specifications. Composed of second quality rails for steel fabrication. The product is free of any non-permitted materials, corrosive, harmful and hazardous chemicals, radiation and pollution, non-ferrous and non-metallic materials, flammable materials, oil, garbage, dust-freeâ?¦ and the impurities are not more than 0.3% of the total weight. The cut can be to a selection dimension between 0.9 and 12 meters at the Buye r's choice.