British Wire Mesh Screen Suppliers and Manufacturers

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Copper Wire Scrap mill-berry We could supply the copper scrap with high quality and competitive price.�  1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could� meet� customers need. Application: Electrical, light industry, machinery,national defense� industry� . Copper Scrap is industry a important sources of the raw materials,� all kinds of can be recycled Recycling waste production with copper

Item Value Place of Origin UK Brand Name Copper Wire Scrap Model Number CS11945 Type Copper Wire Copper Content 99% MOQ 100 Tons Appearance Red color Cu Content (%) 99.998% Purity High Purity

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

This New Model virtual pinball machine is a big upgrade from a normal virtual pinball machines. Adding real motor shaker inside cabinet to make force feedback when playing games. Full cabinet active LED flasher and strips controlled by game make machine look amazing

I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.

Bard is a well-known manufacturer of medical devices, including products for hernia repair. Meshes are commonly used in hernia repair procedures to provide support and reinforcement to weakened or damaged tissue in the abdominal wall. Here are some general considerations: Anatomical Design: The term "ANATOMICAL MESH" suggests that the mesh is designed to fit anatomical contours, potentially allowing for better conformity to the patient's anatomy during hernia repair. 3DMAX MID: This part of the name may refer to specific design features or characteristics of the mesh. For example, "3DMAX" might imply a three-dimensional design for optimal support. Mesh Material: Hernia repair meshes are typically made of synthetic materials, such as polypropylene, which is known for its durability and biocompatibility. Surgical Technique: The mesh is used by surgeons during hernia repair procedures to reinforce and support the abdominal wall, reducing the risk of hernia recurrence.

The Bard PerFix Light Plug is a medical device used in hernia repair. Bard is a well-known manufacturer of medical devices, and their hernia repair products include mesh implants designed to reinforce and support weakened or damaged tissue in the abdominal wall. Key features and considerations for the Bard PerFix Light Plug may include: Hernia Repair: The PerFix Light Plug is specifically designed for use in hernia repair procedures. Hernias occur when organs or tissues protrude through a weak spot in the surrounding muscle or connective tissue. Mesh Material: The product is likely made of a mesh material. Meshes used in hernia repair are often constructed from synthetic materials, such as polypropylene. Plug Design: The term "plug" suggests that the device is designed to fill or cover a defect in the abdominal wall associated with a hernia. Lightweight Design: The inclusion of "Light" in the product name may indicate that the mesh is designed to be lightweight while still providing effective support. Surgical Technique: The PerFix Light Plug is used by surgeons during hernia repair procedures to reinforce the tissue and reduce the risk of hernia recurrence.