Please click here to check who's online and chat with them.

Find Verified Tools Instruments Suppliers, Manufacturers and Wholesalers

Dec-22-22
 
Quick TR1300A hot air soldering station is an professional intelligent soldering rework station for mobile phone motherboard repair, 1300W Quick TR1300A intelligent hot air soldering station with touch control temperature alarm password lock function multipoint temperature digital calibration for phone PCB soldering repair.

QUICK TR1300A Intelligent Hot Air Station Mobile Phone Soldering Repair. Come with 3pcs: Heat Gun Nozzles 5mm 6mm 8mm, if need 3mm 12mm Nozzle, need bought it alone. More QUICK 861DW TR1300A Nozzles from: VC979.

General Specification:
Power: 1300W
Voltage: 110V 220V for choose
Temperature range: 100 C~500 C 212 F-932 F
Temperature stability: 2 C
Air volume: 6 70L / Min
Airflow: 1 100m3/h

Description :
Host and duct design separately
Ultra-high power 1300W
You can preset the process parameters of the three channels
With temperature alarm function
The use of brushless vortex fan, air flow adjustable, a large range
Can be on the temperature, air volume, time and other parameters set

Mulit-point temperature digital calibration, temperature locked by password.

Parameters of three channels pre-set memory.
Temperature alarm function, C and F interchangeable.
Twin-stag brishless blower pump for stable airflow, long life.
Temperature, airflow, working time and other parameters can be set.
Slient design of the rework station, with noise lower than 55dB.
Plug-in design of ceramic heating element for stable temperature, long life and easy maintenance.
ESD design, ESD testing function.
Can be controlled via PC

QUICK TR1300A 1300W Intelligent Hot Air Soldering Station

Features :

Multipoint temperature digital calibration,Password lock function.
Can preset technological parameter of three gallery, more practical.
Temperature alarm function, temperature changer.
Adopt two-stage supercharging brushless pump, air pressure stability, long life.
Set the parameters such as temperature, air velocity and time.
Ceramic heating element, plug type design.
De-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Suitable to hot shrink, drying, remove lacquer and viscosity, thaw, preheating, disinfect and so on.
Suitable to the situation with different grade airflow.
Suitable to the hot air lead free de-soldering.
Dec-22-22
 
ATTEN MS-300 3 in 1 Combination Hot Air Gun Desoldering Station DC Power Supply Maintenance System. 15V 3A dc power supply APS1503 + 1000w hot air gun ST-862D + 65w soldering iron ST-965, Combination maintenance system for soldering / de-soldering / dc power supply repair working.

Product Specification :

Soldering Station (ATTEN ST-965)
Automatic standby, automatic shutdown, intelligent timing.
With buzzer alarm function.
Temperature lock, temperature calibration and
Temperature alarm function.
Password protection function and temperature linkage switch function
The microcontroller controls temperature calibration.
The newly designed LCD display makes the controls visual.
Buttons for presetting or switching frequently used temperatures (1,2,3)

Hot Air Station (ATTEN ST-862D)
The LCD display makes the controls visible.
Temperature unit switch function.
Temperature lock, timing work function.
The single-chip microcomputer controls the temperature calibration and constant work compensation.
Powerful airflow and brushless fan.
Easy to replace the pluggable heater.
Convertible with straight and spiral air.
Auto sleep function.

DC Power Supply (ATTEN APS1503)
The USB interface, two-screen displays.
Using MCU digital string adjustment, low ripple, low noise, and high stability.
Adopting dual meter design, more suitable for telecommunication equipment.
Fast dynamic load response speed to optimize communication equipment.
Supports automatic recovery of overcurrent protection (OCP) and OHP.
The Independent USB interface can provide 2.1A current output, support DC and short circuit protection.

Package includes :
1pcs x Soldering Station ( ATTEN ST-965 )
1pcs x Hot Air Station ( ATTEN ST-862D )
1pcs x DC Power Supply ( ATTEN APS1503 )
Dec-21-22
 
JBC CDS CD-2SHQF soldering station with the JBC Advanced system for general electronic applications. The JBC CDS CD-2SHQF(CD-2SHE) soldering station with JBC soldering iron tips C210002 C210018 For electronic motherboard BGA IC soldering repair.

Note: JBC CDS CD-2SHQF Solder Station is now only 220v in our market, if you choose 110v, we will send you a voltage converter.

It works with the JBC exclusive heating system and the intelligent sleep & hibernation features.

Using the menu you can personalize over 20 parameters to help manage the soldering process.

It features a USB connector to update software, create graphs and manage parameters from a PC.

Complete cleaning system with an antisplash membrane to keep the work area clean.

Use the integrated wiper to remove excess solder from the tip.
Use T210 series handle, with C210 series iron head for precision welding
Power 40W. Can be used 300 degrees low temperature welding
You can use the USB-B type data cable to connect the computer to observe the temperature curve.
2 seconds to 350 degrees
Up to 20 sets of parameters can be set using the menu
Unique sleep + sleep function can extend the life of the tip 5 times
User-friendly handle control, very comfortable to use the feel

Specification :
Ambient operating temp.: 10-40 C / 50-104 F
Input Fuse: 1A (230V)
Output Peak Power: 130W / 23.5V
Package dimensions: 234 x 234 x 258 mm
Package weight: 5 kg
Size: 150 x 200 x 180 mm
Temperature selection: 90-450 C / 190-840 F
Tip to ground resistance:
Dec-21-22
 
Parameters :
Model: T12-11 soldering station iron
Temperature range: 0 C -400C
Working voltage: 110V/220V 50Hz/60Hz
Output voltage: 24V
Maximum power: 75W
Support English Menu
include 3 type tips

Features :
Super heat recovery, digital display.
Temperature locking system, sleep mode.
Temperature compensation, low temperature alarm.
Composite tip of excellent thermal recovery and accurate temperature setting.
Just need 3 seconds, you can do welding work.
The working life is 1-2 times of others tool.
Sleep function, Energy saving 30%-70%, don't need add tin to protect solder.
Independent intelligent temperature control system and heating system, heat transfer efficiency increased by 30%.
Continuous welding of five solder joints, the maximum loss of temperature less than 25
High efficiency anti-static function, electromagnetic shielding function, can be free to deal with all the electronic components of the special requirements.
The welding speed is improved, and the production efficiency is improved 30%-50%.
Lower temperature welding, below 50-100 than other welding tools, it is not easy to burn the bad components and circuit boards.
Low temperature welding plus sleep technology, the integration of welding nozzle long life.
Dec-21-22
 
ATTEN ST862D Intelligent digital display rework station For PCB chip soldering repair, 1000W Whirlwind ATTEN ST-862D lead-free hot air gun soldering station, ATTEN ST-862D Hot Air Rework Station 1000W Whirlwind 20L-120L/Min.

Feature:
1. The LCD screen displays the operating temperature and status to achieve visual and human-machine interaction.
2. Menu-style operation, three sets of fast temperature / air volume access keys to achieve common temperature fast switching, 100 C -480 C.
3. Strong airflow with brushless fans.
4. Plug-in heating chip replacement is fast.
5. Straight wind and spiral wind convertible.
6. Automatic sleep.
7. Temperature lock function, timed work function.
8. Software calibration temperature control function, temperature compensation, to achieve constant temperature work.

Input Voltage : 220V / 110V.
Power: 1000W.
Temperature Range: 100~480
Maximum Air Flow:120L/min.
15166 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
Dec-21-22
 
ATTEN ST-965 lead-free Soldering Station Adjustable Temperature

ST-965 Soldering station :
Temperature locking,temperature calibration and temperature alarming function
Password protecting function and temperature unite switching function
Buttons(1,2,3) for pre-setting or switching frequently used temperature
New design with LCD display screen making control visualization
Automatic standby ,shutdown with smart time setting
MCU controlled temperature calibration
Beep alarm function available
Security sticker
Copper transformer
Pluggable heater
SMT Process

Define button :
decrease value
That shortly press button change value slowly, long press button change value rapidly
Long press both key at the same time to enter into menu mode
Key means save or confirm
3 groups of preset key
Key is 3 groups of preset key
Set preset value by long pressing key
Dec-16-22
 
Atten ST-100 100W ergonomically-styled 100W intelligent digital soldering station, Atten ST-100 is a newly designed, more intelligent, more reliable, more economical and more convenient digital small size soldering station with 80W heating element for temperature of 150 - 480 C. ATTEN ST-100 Solder station is more economical due it high performance and new features.

Atten ST-100 100W Premium Intelligent Soldering Station

Special Features :
Smart recognition for working and non-working status.
Intelligent cooling and temperature recovery.
Automatic standby, shutdown to ensure personal and property safety which also can extend product life.
Silver alloy heater to achieve quicker heating-up.
Brand new design and LCD display screen to display various setting parameters.
Newly designed menu which enable system setting easier.
Visual control over operation process in which analogue heating-up strength status bar to indicate heating up status.
3 buttons to store and retrieve frequently used temperature values quickly.
Temperature locking which make production line management convenient.
Smart standby, shutdown function, adjustable standby time and adjustable shutdown time enable more energy saved and environment friendly.
Touchtone which could be turned off and on.
MCU controlled temperature calibration was designed to be more accurate and more convenient which keep this product in good performance for long time to come.
This product was designed with low-voltage heater which is completely separated from power supply to keep soldering work safer.
This product was designed to be compatible with AT800 series excellent soldering
Tip which was assembled separately with heater to cut costs down.
Separate iron stand to save room and to make soldering station placement easier.

Technical Specifications :
Optional Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz
Power: 100W
Heater voltage: 24VAC
Temperature range: 150
Temperature offset range:
Temperature accuracy: 10 C
Temperature stability: 2C(in still air, no load)
Automatic stand-by time: 1-120 minutes
Standby temperature: 150 C
Automatic shutdown time: 1-120 minutes
Temperature adjustment: 5 digits (Default)/1 digit (Fine-tuning)
Heater: Silver alloy heater
Temperature lock: Yes
Touchtone: Yes
Tip-to-ground impedance:
Tip-to-ground voltage:
Dec-16-22
 
90W Quick 203H digital display soldering station for Phone repair, microsoldering tool QUICK 203H lead free ESD soldering iron rework station. Intelligent QUICK 203H welding station for soldering work. QUICK 203H 90W ESD Soldering Station With Digital Display.

Features:
1. Sensor close to Tip giving accurate Temperature Control
2. Fast heating and rapid thermal recovery
3. Suitable for lead-free soldering
4. Auto sleeping function available, energy-efficient.
5. With password lock function
6. Digital temperature calibration, the operation is simple and convenient.

Specifications:
1. Temperature range:50-600
2. Power:90W
3. Size:245 235 130mm
4. Voltage: 220V/110V
5. Temperature stability: 1
6. Resistance for ground :
Dec-16-22
 
Upgrade YIHUA 995D+SMD Soldering Station, PHONEFIX 999D Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station

power supply voltage: 110V,220V-240V
power : 750W (max)
Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm
Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm

Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).

2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
Dec-16-22
 
YIHUA 995D+SMD Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station

Specification:
Machine
power supply voltage: 110V,220V-240V
power : 750W (max)

Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm

Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm

Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).
2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
Dec-01-22
 
JCID AiXun Face ID Dot Projector Precision Calibrator For Phone X XS/XR 11/11 Pro/11 Pro Max Faceid Flex Cable Alignment Repair Tool.

Instructions:
Step 01: Buckle the face ID module. Put the corresponding dot projector face lD module into the alignment calibrator base.

Step 02: Put on the top cover Built In strong magnetic adsorption, fix it more firmly and align accurately.

Step 03: Adjust the dot projector flex cable Move the cable slightly to complete alignment. Do not force the module.

After alignment, there ls no gap between the cover plates.

Product Size: 50mm 16mm 8mm
Package Size: 85mm 55mm 25mm

Features:
1. Precise alignment and quick fit.
2. Reset test of iron frame deformation.
3. Realize the standardized maintenance of dot projector alignment.
4. Standard positioning, magnetic reset.
5. Transparent polymer materials.
6. Suitable: X/XS/XSM+XR 11/11Pro/MAX
Oct-14-22
 
SS-T12A Heating Station Main Unit with T12A-X3 / T12A-CPU / T12A-F/ T12A-Face ID/ T12-andriod / T12-N12/ T12-N13 Motherboard Heating groove for Phone X-13 Pro Max Android Phone motherboard CPU Face ID repair.

SS-T12A Heating Station Main Unit + Five kinds Motherboard Heating groove.

T12A-X3 for X / XS / XMAX
T12A-CPU
T12A-F
T12A-Andriod
T12A-Face ID
T12-N12 for Phone 12/12 Pro/12 Pro MAX/ 12 MINI
T12-N13 for Phone 13/13 Pro/13 Pro max/13 mini

Added T12A-N11 for phone 11 pro max motherboard

SUNSHINE SS-T12A Phone X upper / lower motherboard pre-heating station adopt special heating design and precise temperature control capability, which will locate accurately locate the needed heating part. SS-T12A has dual bayonet design to make phone X motherboard stable. SUNSHINE SS-T12A has EU, AU, and US plug, 110V or 220V for your choice. Using high purity copper to guarantee heat transfer, which is not easy for deformed, durable and anti-wear.

100V-240V SS-T12A Phone X mainboard stratified 185 degrees accurate rapid separated disassembly heating station.

Phone X logic board was folded in half, two layers then were soldered together, the upper layer is the mainboard, and the lower layer is the signal board. Which made our repair much difficult to proceed, how to repair Phone X logic board in fast and efficient method, need the professional Phone X motherboard repair tools

Features :
Adopting 185-degree layered process to remove the iP-X motherboard, not only from our fine analysis of iP-X solder paste ,but depends on the special heating design and precise temperature control of SS-T12A.
SS-T12A only heats the area that the IP-X board needs to be removed to prevent improper heating.
Dual bayonet design, make sure the iP-X motherboard is stable on the stage.
High purity copper is used as a film to ensure uniform heat transfer and heat.
Sep-06-22
 
Film Shrinkage Test Equipment Film Shrinkage Tester GBK-D1
Film Shrinkage test, known as linear thermal shrink test or free shrink test, is used for analyzing the effect of temperature on heat shrinkable films made from polyethylene, ethylene copolymers and their mixtures. Basically, shrinking force, contracting force and shrinking ratio can be measured in such determination.

GBPI Film Shrinkage tester conforms to the multiple national and international standards:
ASTM D2732 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ISO 14616 - Plastics Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures Determination of
shrinkage stress and contraction stress
DIN 53369 - Testing of plastic films determination of the shrinking stress

Film Shrinkage Test Equipment GBK-D1 is used to determination of the degree of unrestrained linear thermal shrinkage and dimensional stability at different temperatures. Widely used in industries of plastic material, plastic products, petroleum, chemicals, research institute, inspection agency and so on.

Principle
This tester uses the principle of air heating to connect the tested sample to the tension sensor and displacement sensor. After reaching the maximum shrinkage force, it is placed in an external test environment with an ambient temperature of 23 to cool down.
The reference temperature, shrinkage force and displacement are recorded, and the recorded data can be used to determine the optimal shrinkage conditions of the film.

Standards
ISO 14616, ASTM D2732, DIN 53369
Dec-24-21
 
Pipeline system inflatable air grip union



Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections.



Features

Low requirement to centered when installed, to achieve quick install and seal.

The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance.

No wrenches, bolts & nuts required.

Fast and easy make up without close alignment.

Pneumatic Tube inflatable up to 200 PSI.
Nov-04-18
Supplier From New Delhi, Delhi, India
Dec-10-21
Supplier From Cambridge, MA, United States
May-19-19
Supplier From Shanghai, Shanghai, China
Apr-15-03
Supplier From Nairobi, Kenya
Apr-17-09
Supplier From Ludhiana, Punjab, India
Jul-13-10
Supplier From Qingdao, Jiaonan, China
15166 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.