1000 liter / 275 gallon repurposed rain tank. These are used & new tanks, food-grade tanks are comprised of a galvanized metal frame with a pallet (metal, plastic, or wood) and a plastic HDPE bottle. The rain tank has a 6, 8, or 12-inch top-fill cap and a 2-inch bottom butterfly or ball valve. The tanks may or may not include a plastic cap with a buttress or NPT thread for the bottom valve. If a valve cap is included, it can be drilled to accept our garden hose spigot assembly. A spigot assembly and 7/8 inch hole saw are not included. The dimensions are approximately 39 inches wide across the bottom valve, 47 inches deep, and 48 inches tall and the tanks weigh approximately 75 lbs empty. Previous contents may include olive oil, fish oil, organic fertilizer or beverage concentrates and some residue may still remain inside. The residue, if any, will only enrich the soil.
High strength and high corrosionproof, provides long service life and convenient to fill and clean.
It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc.
Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours.
The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products.
We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
How to Properly Use Liquid Nitrogen Tanks
To ensure the safe and efficient operation of liquid nitrogen tanks, follow these steps before use:
1. Check the Tank
Inspect the tank for any dents or damage to the outer shell.
Ensure that the vacuum port is intact and properly sealed.
Remove any foreign objects or impurities inside the tank to avoid corrosion of the internal liner.
2. Pre-Cooling the Tank
Begin by adding a small amount of liquid nitrogen to the tank to cool the inner liner.
Once liquid nitrogen is added, cover the neck plug and allow the tank to sit for a few hours. The boiling phenomenon should subside, and the liquid nitrogen will stabilize.
If there are water droplets or frost on the tank's surface due to heat exchange, wait until they fade away, and there is no visible frost on the neck plug. This indicates that the pre-cooling process is complete.
We, ANDREW SMITH OIL & GAS Ltd are authorized representative company. Email: info@andrewsmithoilandgasltd.uk
We work directly with top POLISH, KAZAKHSTAN & NETHERLAND REFINERY for allocations of petroleum products. At present we have EN590, Jet Fuel A1 and D6 oil available for export. For more information contact the below details. We are open to transact business with genuine buyers.
Descriptions
Stainless steel mixing tanks in brewing systems are crucial for mixing and stirring ingredients. Their corrosion resistance and durability ensure a clean and efficient brewing process, maintaining the quality and consistency of the beer.
Stainless Steel Mixing Tank Advantages:
Stable Structure: The tank body is made of integrated steel plate, with only one weld seam on the sidewall of the cylinder, which increases the structural strength of the tank. The dished heads are stamped from high-purity stainless steel plates of a Japanese brand, HOKKAI, or conical heads can be chosen to meet budget-friendly options.
Constant Pressure: The test pressure of all YME tanks is 2 to 3 times the normal working pressure, ensuring the pressure-bearing capacity of the tank under extreme conditions by increasing the design pressure value of the tank during the design phase and in the factory.
Corrosion Resistance,High Temperature Resistance: The inner and outer surfaces of the tank body, tank supports, and welds are all polished, and the components used all comply with hygienic standards, suitable for high-temperature, high-pressure, and acidic or alkaline environments.
Easy Transportation: All tanks are equipped with lifting lugs at the top and support brackets at the bottom for forklift transportation. Adjustable feet or wheels are installed under the support legs for easy movement of the tanks during on-site installation. Special brackets are also provided to support the tanks during transportation.
Easy Cleaning, Simple Maintenance: YME's designers will add dedicated CIP cleaning balls or manual cleaning devices for stainless steel tanks based on the customer's site usage. Manways are installed on the top and sidewalls of the tanks for easy cleaning of the tank interiors from the top and sides.
two-sided galvanized sheet with the features of high intensity, anti-corrosion, long service life and easy to install.
4 different specifications and 12 model numbers can meet the different feed storage requirements.
Special top cover opener design, easy to operate in windy weather.
Special designed brim on the joint of hopper body and hopper panel and seal strip between panel sheets can prevent rainwater entering the silo to cause moldy.
Special designed hopper panel can avoid feed piling up.
Equipped ladder and window are convenient for maintaining the equipment and checking feed condition.
Different boot and outlet can fulfill complex feed conveying requirements.
Customized pneumatic feeding system.
