Solar Panel: mono/polycrystalline 1pc 5W(10W~20W optional);
Battery: VRLA 12V/7A 1pcs;
Controller: Solar control circuit 1pcs;
Output: DC 12V/10A 1pcs USB 5V/500mA 1pcs;
AC Charge: 16V/3A 1pcs
Introductions:
Portable solar power system consists of solar modules, controllers, solar batteries. The product is designed specifically for home DC application, It can be used for all DC items, and it is the ideal charger for most electronic products. The advantages of portable solar power systems is its low cost, compact and beautiful design, easy to carry, OEM and ODM inquiries are welcome and acceptable. The portable solar power systems are suitable for the places where are far away from grid-power and the ocasions such as camping, hunting, picnic, travel in wild and so on.
Size: Solar panel:19*30*1.8CM
Control Box:23*12.5*11CM
Specifications: OEM and ODM are available
190Watt Nano Coating Solar Panel, 190W Mono Crystalline Solar Panel
190Watt Nano Coating Solar Panel feature:
Products Name:
Hydrophobic and self-cleaning Solar PV Panel
Maintenance Free Solar PV Panel
Frost resistant Solar PV Panel
Salty Air resistant Solar PV Panel
Nano Panel brings you Much More Power Output, Much Less Maintenance, Much Longer Lifespan!
Nano Coating Solar PV Panel improves efficiency in three ways: Anti-wetting, Dirt reduction and Reduced light reflection. Anti-wetting and self-cleaning glass properties improve PV efficiency in inclement weather. More than 8 % power shall be produced compared with traditional solar PV Panel without nano coating.
Nano Coating Solar PV Panel prevents dirt, algae and bird fouling from adhering to glass, Dust and dirt are washed away with rainwater, The panel reduces cleaning frequency saving energy, time and cost.
Dirt removal and salty Air resistant properties drastically increases the Life Span of Solar PV Panel
190Watt Solar Panel Mechanical Data
Cell Type Mono-crystalline
Cell Arrangement 72(6¡¿12) Mono-crystalline cells 125mm
Dimensions 1580 x 808 x 35 mm
Weight 15.5Kg
Front Cover 3.2mm thick, low iron tempered glass
Frame Material Anodized aluminum alloy
Warranty 90% power output over 10 years
80% power output over 25 years
Free from defects in materials and workmanship for 12 years.
Dimensions 1580 x 808 x 35 mm
Weight 15.5Kg
26 pcs/ Pallet
728 pcs/ 40HQ FCL.
1.Solar panels use the high efficient crystalline silicon and strictly according to the international standard operating procedure, high conversion efficiency, durabel.
2.Meet the various dc & ac electrical appliances' demand, such as tv, fan, radio, computer etc.
3.Fashion modeling, easy operation, environmental and healthy, blending in a variety of fashion intelligent household, in case of power outages.
4.Meet the remote areas basic living power requirement, suitable for field operation , isolated islands life, villa, power failure emergency situation, and all sorts of natural disaster lighting.
9874 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
High efficiency and low price solar module 20w
Electrical Characteristics BCT20-12
Maximum power at STC(Pmax) 20W
Optimum operating voltage(Vmp) 17.2V
Optimum operating current(Imp) 1.16A
Open-circuit voltage(Voc) 21.6V
Short-circuit current(Isc) 1.31A
Short-circuit current temperature coefficient
(0.065, 0.015)%/ C
Open-circuit voltage temperature coefficient
-(80, 10)MV/ C
Peak power temperature coefficient
-(0.5, 0.05)%/ C
NOCT(Air 20 C;Sun 0.8kw/m wind 1m/s) 47, 2 C
Operating temperature -40 C TO 85 C
Maximum system voltage 600V DC
Power tolerance 3%
STC: lrradiance 1000W/m2,Module temperature 25,AM=1.5
Features:
1. Tempered glass laminated with aluminum frame
2.Complete solar products series, fast & convenient delivery, customized specification
3.The backside frames are equipped wth drainage holes,so we eliminate the risk that rain or snow water may accumulate in the frame lumen and freeze or even bend the frame in cold season
4.We supply OEM services, you can put your logo and picture on the solar panel if you have any other requirement.
5. We can design different watts panel according to customer's requirement
6.Excellent construction :
Our modules have been encapsulated with the greatest care: They resist corrosion caused by rain, water and gas. Their anti shocking performance makes them resist hail and work under atrocious weather conditions where temperature changes quickly.
APPLICATIONS:
Solar panels can be used for a wide variety of applications including:
* Remote power systems for cabins
* Telecommunications equipment
* Remote sensing
* For the production of electricity by residential and commercial solar panel systems
* Solar cooker for cooking purpose
* Solar generator
* Solar thermal system
* Calculators
* For Security systems
* In street lights.
Individual carton box and wooden pallet
2824pcs/20'gp
5824pcs/40'gp.
Solar Controller STIP-603 Series
PRIO-603 provides better performance for solar power station with LCD display, especially which needs remote control.
STIP - 603 Rating
Rated Voltage: 12/24 Volt or 24/48 Volt auto work
Rated Current: 30,40,50 or 60 Amps .
Equalisation voltage 14.8Volt
High voltage disconnect (HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect (LVD) 11.1Volt
Low voltage reconnect (LVR): 12.6Volt
self-consumption: 40mA maximum
Temperature compensation: -30mV/`C/12V
Terminals: for wire sizes to 16mm
Temperature: -35`C to +44`C .
* Microprocessor Which is made in USA
* PWM series charging mode
* RS232 communication relay, which can download data during the last 30 days
* With 1A/30V relay
* State of charge (SOC) battery regulation
* Battery Ah setting, boost, equalising, float charging
* Temperature compensation, with temperature sensor.
* Full circuit protection, electronic fuse
* Real clock display, chinese or English display option
* Option: remote digital temperature sensor 5m, RS232 cable 1.5m, PC software.
Solar Controller STIP-602 Series
Provides longer battery life and improved system performance. Sets new standards for reliability and self-diagostics
STIP - 602 Rating.
Rated Voltage: 12/24 Volt or 24/48 Volt auto work
Rated Current: 30,40,50 or 60 Amps.
Equalisation voltage 14.8Volt
High voltage disconnect (HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect (LVD) 11.1Volt
Low voltage reconnect (LVR): 12.6Volt
self-consumption: 40mA maximum
Temperature compensation: -30mV/`C/12V
Terminals: for wire sizes to 16mm
Temperature: -35`C to +44`C .
* Microprocessor Which is made in USA
* PWM or ON/OFF series battery charging options
* State of charge (SOC) battery regulation
* Battery Ah setting, boost, equalising, float charging
* Automatic load reconnection,
* LCD display: SOC as a fuel gauge, all system parameters in
digital value, system status as symbols
* Remote temperature sensor (option).
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , eva encapsulant 2008B especially for crystal and polycrystalline silicon module encapsulation, after cured, it is characterized with high adhesion, excellent weather and uv resistance, good insulation, low shrinkage, high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215
2. Excellent adhesive strength with glass and TPT 60N/cm
3. Light transmission > 91%
4. Cross-linking rate is ranged from 80-85%.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA), EVA encapsulant 2008a especially for thin film module encapsulation, after cured, it is characterized with high adhesion, excellent weather and UV resistance, good insulation, low shrinkage, high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61730
2. Excellent adhesive strength with glass and TPT £¾80N/cm, suitable for double glass structure, no bubbles and Delamination.
3. Light transmission > 91%
4. Cross-linking rate is ranged from 80-90%.
Solar EVA encapsulant is made by ethylene vinyl acetate (EVA) , EVA encapsulant 2009 especially for C-SI module encapsulation , after cured , it is characterized with high adhesion , excellent weather and uv resistance, good insulation , low shrinkage , high optical transmission.
V-gool EVA Encapsulant outstanding property:
1. Damp and heating Test (8585RH ) continuously 1000 hours, and temperature cycles test (-40-85)___IEC61215
2. Excellent adhesive strength with glass and TPT £¾80N/cm.
3. Light transmission up to 92%
4. Cross-linking rate is ranged from 80-90%.
180W mono solar panel specification:
Mono-Crystalline
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S180M 180W 72 1000 36.5 4.87 44.2 5.28
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 17%
Output tolerance (%) 3%
Frame (Material, Corners, etc.) Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
180W mono solar panel specification:
Mono-Crystalline
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S180M 180W 72 1000 36.5 4.87 44.2 5.28
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 17%
Output tolerance (%) 3%
Frame (Material, Corners, etc.) Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
230W poly solar panel specification:
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S230P 230W 60 1000 30.2 7.56 36.7 8.18
Parameter:
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 16%
Output tolerance (%) 3%
Frame (Material, Corners, etc.)
Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
Solar modules is well designed with good quality and high efficiency.We adopt 17-18% efficiency crystalline solar cell.We offter any size solar modules according with customer requirement. It is your best choice for telecommunications, traffic sign etc.
The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tubes vacuum has been compromised.
An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them. A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the thermos effect¡± created by having a vacuum between the layers of glass.
