LARGER WORKING PLATFORMS IN MINUTES BY ATTACHING A CANTILEVER SET. Width of cantilever set: 0.75 m. Length of cantilever set: 1.80 m; 2.50 m; 3.00 m. For retrofitting to FA 900 mobile scaffolds, standard and wide versions up to working heights of 8.60 m for indoor use and 6.65 m for outdoor use. For doubling or trebling the working area. For working above impediments that would make the space under the platform narrower. For creating a number of workstations on a single scaffold.
Material: Radiata Pine, Larch Glue: Melmaine, WBP glue Size:38*225*3900/5900mm or customized Standard: OSHA Application: Construction Market: Middle East, South-East Asia market
Steel plank specifications Specifications(mm)Thickness(mm) 160*451.0-2.216045 210*451.0-2.221045 225*381.0-2.222538 230*631.0-2.223063 240*451.0-2.224045 250*501.0-2.225050 300*501.0-2.230050 420*451.0-2.242045 450*451.0-2.245045 480*451.0-2.248045 500*501.0-2.250050 -
Material Q235 Steel plank specifications Specifications(mm) width250mm*height50mm thickness 1.5mm long 3meter -
Wall formwork, column formwork, concrete formwork, construction formwork, shuttering, single-sided formwork High flexibility with only a few main components can meet any construction requirements. Timber beam h20, steel waling, plywood and clamp etc.. These components can be combined for all shapes, even with the restructuring of wall formwork units when a frequent change of the building structure plans happens. Advantages:
Table formwork, slab formwork, ceiling formwork, concrete formwork, shuttering, horizontal formwork Horizon table formwork is designed to be used typically in large area slab concreting. The table formwork can be shifted horizontally and vertically without being dismantled, which provides a cost-effective and efficient solution for the slab work on site. Advantages: 1. The table formwork is assembled on site and shifted from one area to another without dismantling, thus minimizing added risks in erection and dismantling.
Scaffolding prop, steel prop, shoring prop, post shore Galvanized scaffolding prop is another important component of horizon formwork system, especially in the slab formwork. With the prop161; high loading capacity, low weight and stability, horizon slab formwork works safely and efficiently on site as well as cost-effective. Also, the scaffolding prop is fast and easy for handling on site.
JRS Scaffolds is a prestigious Ring Lock Manufacturer. We are widely known for producing safe, convenient Ring Lock Scaffold line that comprise Ring Lock Horizontal ledger, brace, toe board, base collar, etc. So whether you are searching for complete Ring Lock Scaffolding system or just compatible accessories for your project, just approach JRS Scaffolds. If you are looking Ring Lock Scaffold for sale, then look none other than JRS Scaffolds. STANDARD AND VERTICAL .................................................... Standard or Vertical is the vertical member of the JRS Ring system or multidirectional system having Rosette fixed at specified distance, thus making its application flexible to any type of structure. The use of special grade high tensile ST 52 or S355 steel tubes with 3.2 mm thickness gives extra strength. "CODE:- EFC-4001" BOARD BRACKET ........................................... JRS Lock scaffold board bracket is used to create an extended work platform, wherever required. Made out of 48.3mm tubes, the board bracket helps to establish the scaffold structure. One end of the board bracket is secured to the main structure, while the other end remains suspended. "CODE:- EFC-3005" LEDGER ............................... The JRS Lock system Ledger fitted with forged ledger blades is used to connect the verticals or standards to each other, thus creating a platform. The Ledger blade fits between the two cups and is secured with a single hammer blow."CODE:- EFC-3002" INTERMEDIATE TRANSOM ....................................................... Intermediate Transom is used to make up for the distance between standards if it exceeds the span of scaffolds board. These are used to secure the 2 boards and 3 boards."CODE:- EFC-3003". DIAGONAL BRACE ..................................... A brace or diagonal gives rigidity to the structure. These are connected diagonally between verticals using the rotating ledger blades fixed at its ends."CODE:- EFC-3004".
All of our used scaffoldingsa are used in the construction site in Japan. We ship them with complete set for building construction.
Production information of scaffolding board below, The normal size of scaffolding board 38/42*225/230*3960/5960mm; Material: 100% radiation pine. Glue: wbp, meiamine, mr. Moisture content: below 14% Thickness tolerance: +/- 1mm Width tolerance: +/-1mm Length toelrance: +/- 3mm Weight: under 270kg/square meter.
Cup-lock scaffolding system Cup-lock scaffolding system is a multi-purpose system scaffold, suitable for access and formwork support in all types of construction of building & civil engineering projects. Components: *cup-lock standard with spigots, cup-lock ledger, diagonal brace, intermediate transom Base jack, metal plank or catwalk Product feature: -simple. Components allow the easy creation of cantilevers, inside platforms and stair cases. -lighter. 20% lighter than coupler & pin scaffolding system -safe to erect and use Size Standard Length(m) Weight(kg) Self finish Painted Hot galv. L=0.50 2.42 2.5 2.57 L=1.00 4.84 4.98 5.13 L=1.30 6.54 6.74 6.93 L=1.50 7.25 7.47 7.69 L=1.80 8.96 9.22 9.49 L=2.00 9.67 9.96 10.25 L=2.30 11.37 11.71 12.05 L=2.50 12.08 12.44 12.81 L=3.00 14.5 14.93 15.37 Ledger Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 2.38 2.45 2.52 L=0.90 3.44 3.55 3.65 L=1.00 3.8 3.91 4.03 L=1.20 4.51 4.65 4.78 L=1.30 4.87 5.01 5.16 L=1.50 5.58 5.75 5.91 L=1.80 6.65 6.85 7.05 L=2.00 7.36 7.58 7.8 L=2.50 9.14 9.41 9.69 Intermediate transom Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 3.59 3.7 3.8 L=0.90 4.66 4.8 4.93 L=1.00 5.01 5.16 5.31 L=1.20 5.72 5.9 6.07 L=1.30 6.08 6.26 6.44 L=1.80 7.86 8.09 8.33 L=2.00 8.57 8.83 9.08 L=2.50 10.5 10.66 10.97 L=3.00 12.13 12.46 12.86
Steel planks Steel planks is one of the most important products of adto. Adto steel plank is china top one steel board manufacturer. 80% of adto steel planks are for export and have gained high reputation over the world. Adto steel planks enjoys many advantages.Some are list as below: 1. Light weight, nice looking and high loading capacity; 2. Effective service life reaches 5 years, low investment but high returns; 3. Secondary resources recovery; 4. Galvanized surface, fire proof and anti-slide; 5. Rib reinforcement design to strengthen the plank’s loading capacity and ensure good drainage; 6. Patent holes design to reduce the planks weight; 7. Plain stiffeners, box type stiffeners and trapezoid stiffeners choice, meet different customers requirements. Item Size(mm) Thickness Length 210 210*45 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 240 240*45 1.0-2.0mm 0.5m-4.0m 250 250*50 1.0-2.0mm 0.5m-4.0m 230 230*65 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 300 300*50 1.0-2.0mm 0.5m-4.0m
Adto ring-lock scaffolding system consists of hot dipped galvanized steel pie and modular components that are assembled together using integral wedge connectors. Adto ring-lock system is a modular scaffold system which can provide major saving in labor cost while meeting the demands for safety, ease of handling and reductions in maintenance. Components: Ring-lock standard with spigot, ring-lock ledger, ring-lock diagonal, wedge pin, base collar, steel plank, steel stair case. Feature: 1.Time efficient during assembly and dismantling 2.Safe and simple one-man assembly 3.No loose parts 4.Maintenance free Ringlock standard with spigot (48.3mm x 3.2mm, q345, hot dipped galvanized) Description Weight/ length Ring-lock standard 500mm 2.76kg Ring-lock standard 1000mm 5.18kg Ring-lock standard 1500mm 7.61kg Ring-lock standard 2000mm 10.03kg Ring-lock standard 2500mm 12.45kg Ring-lock standard 3000mm 14.87kg Ring-lock standard 4000mm 19.72kg Ringlock ledger (48.3mm x 3.0mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock ledger 1000mm 4.62kg Ring-lock ledger 1500mm 6.50kg Ring-lock ledger 2000mm 8.38kg Ring-lock ledger 2500mm 10.27kg Ring-lock ledger 3000mm 12.16kg Ringlock diagonal (48.3mm x 3.2mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock diagonal 1000x2000mm 10.06kg Ring-lock diagonal 1500x2000mm 10.95kg Ring-lock diagonal 2000x2000mm 12.13kg
Scaffolding & Shuttering Material,Adjustable Telescopic Prop , Adjustable Beam Span, Cuplock Scaffolding System,Vertical,Ledger
Scaffolding & Shuttering Material,Adjustable Telescopic Prop , Adjustable Beam Span, Cuplock Scaffolding System,Vertical,Ledger , Coupler, Scaffolding Accessories , H frame & Cross Bracing
Surface Finished: Natural/ Electroplated/ Galvanized/ Painted Manufacturing process: Forged/ Sheet Metal
(2.00–3.75 Mtrs. Adjustment) (Std.) (2.0 x 2.0) (2.50–4.25Mtrs. Adjustment) (2.0 x 2.5) Size: PSP-5 (3.00–4.65 Mtrs. Adjustment) (2.0 x 3.0) Size: psp4 (2.00–3.75 Mtrs. Adjustment) (Std.) (2.0 x 2.0),Weight 18 Kg
Scaffoldings
Adaptbility Rimmca wall formwork vtf 120 adapts to various kinds of projects asking for different thickness , height & shapes of walls, like power plant, tower and apartment etc. Safety Rimmca not only provides you well-made products but also optimized and individualized solutions, avoiding the trouble back at home. Cost-economical Rim vtf 120 is a simple and efficient formwork system which most of the members can be re-use recycles.Short forming times and large optimized units can save your labour and time.
"single side formwork ssf " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high. Advantages 1.Tensile forces are reliably transferred by means of diagonal anchors. 2.Modular vertical stacking facility. Optimum adaptability to the required pourheight¡, from 4.00 m up to max. 8.0 m 3.Adapts to uneven ground by means of spindles with articulated footplates 4.Adjusting for the different fresh-concrete pressures required is easy and economical¡§csimply increase or decrease the spacing between the supporting frames, as appropriate 5.The high-speed repositioning can be by crane or by traveling unit on rails or rollers.
