Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure. This engine base is combined together with the cylinder and base frame, which is made of ductile iron to increase the cylinder intensity and a brad ability. The cylinder is fitted with the sealing washer made of the oil-resisting rubber for the sealing purpose. By moving the operational handle of the control valve to the two different positions, the heating plate can open and close. It uses the electric pipe for heating, thus makes the workshop clean with easy and reliable operation.
Rubber molding press
Tonne from 25t-3000t, plate size from 400*400- 1800*8000mm Wooden or others under clients' requirement
XK150 XK250 XK300 XK360 XK400 XK450 XK560 Wooden or others
X(S)N10*32 X(S)N20*32 X(S)N35*30 X(S)N55*30 X(S)N75*30 X(S)N110*30 Wooden or others
Rubber machinery
Rubber machinery
Flat vulcanizing machine This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products. Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure. This engine base is combined together with the cylinder and base frame, which is made of ductile iron to increase the cylinder intensity and a brad ability. The cylinder is fitted with the sealing washer made of the oil-resisting rubber for the sealing purpose. By moving the operational handle of the control valve to the two different positions, the heating plate can open and close. It uses the electric pipe for heating, thus makes the workshop clean with easy and reliable operation. According to customer's demands
Automatic Vulcanizing Hydraulic Foaming Machine,Rubber Machine Type XLBQ 1200/1200*4 XLBQ 1400*1500*6 XLBQ 1500*1500*6 Total pressure(MN) 5 8 10 Plate size(mm) 1200*1200 1400*1500 1500*1500 Plate clearance(mm) 150 150 150 Piston stroke(mm) 500 800 150 Plate pressure(Mpa) 3.4 3.8 4.5 Motor power(kw) 18.5 26 33 Dimension(L*W*H) 2400*2100*3200 2650*2400*3600 2750*2400*3600 Weight(kg) 22000 38000 48000 The machine is suitable for rubber, plastic foam spone and the special equipment, the machine is high column foaming plate vulcanizing machine, vulcanizing machine at home and abroad is characteristic of redevelopment of new models. Small size, compact structure. vulcanization pressure and so on, The aircroft type into electric and steam heating. temperature with digital display, simple operation, easy maintenance, and automatic fill pressure, timing open mode, alarm. Features: 1. Special construction and design, featuring in non-breakage, non-deformation. 2. The oil pressure system is controlled in centralized manner. It is equipped with filter. It can extend the hydraulic parts using life. 3. It adopts PF150 oil valve that can be reduced within short time. 4. During production, it is equipped with semi-auto and fully-auto continuous controller. So it can be operated individually, 5. The hydraulic control system adopts imported brand PC and PLC control system. 6.we also can according to the customers' requirement, and design the non-standard type of rubber slipper making machine. Payment Term: TT 30% deposit  70% balance payable within 3 days once received the copy of shipping docs(CI,PL&BL) Or L/C at sight with irrevocable
Rubber kneader rubber mixer rubber mixing mill .Rubber Kneader with complete sealed condition; .National Patent for the dust-proof seal; . ISO 9001-2000 Certification; 1.Rubber kneader with completely sealed condition,materials are mixed or plasticated under certain pressure,controllable temperature ,which makes high production effciency and obtains excellent quality. 2.Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to bedispersed uniformly. 3.Surface where is contacted with the materials are all platedwith hard chromium and polished,which is corrosion-resistantand wear-resistant. 4.Jacket construction is adopted in parts that surfaces contactwith materials to achieve excellent water-cooling or steamheating effect and fit in with the needs of plastics and rubberprocessing technology. 5.Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer. 6.Programmable logic controller (PLC) is adopted in theelectric-control system,which has reliable control function andalarm function,and interlock safety-protection function and itis procded with serial interface of net. Type X (S)N35 X(S)N55 X(S)N75 X(S)N110 Total Volume of mixing chamber(L) 75 125 180 250 Working Volume of mixing chamber(L) 35 55 75 110 Driving motor power(KW) 55 75 110 185 Tilting motor power(KW) 5.5 5.5 5.5 7.5 Tilting angle 110 110 110 110 Rotational speed of the rotor(front/rear) 36/30 36/30 36/30 30/24.5 Pressure of compressed air(Mpa) 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 Cooling wate presssure (Mpa) 0.3~0.4 0.3~0.4 0.3~0.4 0.2~0.4 Size:lengthÃ?WidthÃ?Height 3150Ã?1900Ã?2880 3280Ã?2120Ã?3090 3250Ã?2210Ã?3250 4075Ã?2712Ã?3580
Rubber kneader rubber mixer rubber mixing mill .Rubber Kneader with complete sealed condition; .National Patent for the dust-proof seal; . ISO 9001-2000 Certification; 1.Rubber kneader with completely sealed condition,materials are mixed or plasticated under certain pressure,controllable temperature ,which makes high production effciency and obtains excellent quality. 2.Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to bedispersed uniformly. 3.Surface where is contacted with the materials are all platedwith hard chromium and polished,which is corrosion-resistantand wear-resistant. 4.Jacket construction is adopted in parts that surfaces contactwith materials to achieve excellent water-cooling or steamheating effect and fit in with the needs of plastics and rubberprocessing technology. 5.Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer.
1. Rubber tensile testing machine The tensile, tear, peel, compression, bending and shear tests of rubber products were carried out, measure the performance parameters of the product, such as tensile strength, elongation, elastic modulus and yield strength and son on. 1.1 The testing machine has overload protection device. When the applied force exceeds 2%-10% of the maximum capacity of the testing machine, the overload protection device ensures the automatic shutdown of the testing machine. 1.2 The test machine has limit position protection device. When the beam moves to the upper and lower limit positions, the limit device should act immediately to stop the movement automatically. 1.3 During the test, when the sample breaks, the test function automatically stops, the device automatically stops or according to set mode to returns, then stop.
2. Rubber abrasion tester Rubber abrasion tester is widely used in rubber industry. It is mainly used to test the wear resistance of rubber. 2.1 DIN Abrasion Testing Machine, it is used to determine the wearability of rubber to identify the quality of rubber products. During the test, the rubber rubbed against the gauze on the roller under a certain load, and measure the wear loss. The equipment consists of machine base, roller, weight, reducer, motor, transverse block, cantilever, screw rod, etc. Rubber sample is clamped on the cantilever rotary spring, and the speed reducer drives the roller to rotate. Under the prescribed pressure, the gauze of the roller rubs against the sample to achieve the purpose of wear. The equipment has the advantages of small sample, time saving and no repeated friction.
FUNCTION: The machine press, dewater, flat and cut natural latex coagulum through five rollers, which is a equipment for making smoke rubber. Component: 1. motor belt drive unit 2. Machine frame 3.rolling device 4. spray system 5. wheel device Working Principle: motor reduce a pair of gear (20:52) through one grade V-belt drive, drive-gear transfers drive to forth pair of lower roller, each roller work together after through gear drive.
This machine consists of a pair of rollers with diamond groove, rack and transmission system. By the relative movement of the front&back rollers, the machine presses and flatten the raw material, dewatering the rubber and removing the impurities. Due to different speeds between the two rollers, the raw material is pressed to crepe sheet with honeycomb surface. The machine is very easy to operate and is with the features of compact structure, high efficiency, low noise and low power consumption etc. FUNCTION The machine is used for dewatering and pressing the rubber material into crepe sheet. We can use one creper in family workshop and several in production line as well.
The mass material by elevator, conical screw feeding machine, extruder, cutting, cooling, screening and terminal silo produce processing full automation .After the material were refined , trough feeding it is forced to enter the single screw extruder . The core of the screw is connect with water, and the screw is completely dispersed without excessive friction heat.Excellent dispersion effect, the current of main machine is small, energy saving and environmental protection.The precise temperature control of the rubber granulator ensures the technology of low temperature granulation and the special isolation agent recovery system, which can effectively solve the dust problem in production. Moreover, the added isolation agent will not cause too much waste.The recovered isolator can be reused. The biggest technical characteristic of the rubber granulator is that it adopts the cold processing , which has the characteristics of low processing temperature,
Continuous operating mixing machine Sandychen: Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
