Nitrile Rubber Crusher.
Rubber machinery and rubber compounds.Consulting, rubber machines reselling, rubber compounds reselling
1'with ce and iso9001-2000 certificates 2'finest workmanship, high quality at reasonable price 3'good reputation widely Main uses: This rubber cutting machine is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
with even fabric cord tension. It avoids sometimes tightening and loosening and improves the cutting accuracy. 3. The clamping cutting device uses festo rodless cylinder to drive the cuter rack to move forward and backward. It improves the working efficiency and omits the cutting speed improving device and chain drive system in xal-1450a. It is characterized by simple structure, quick running speed and smooth working without nosie. 4. The main drive cloth feeding device adopts the servo motor to drive the feed cloth roller directly. The feed cloth length, cutting times fixing programmes are controlled by plc. The feed cloth repeated accuracy is within ¡à1.0mm. 5. Pneumatic parts use smc products to improve the reliable work stability.
1'two rollers are made from chilled cast iron, smooth surface is highly polished and scratch proof by cutting knife:high hardness and wear-resistant; 2'the roller is hollow structure, which is for adjusting the temperature of the rollers by Steam or cooling water in term of different request; 3'nip adjustment mode:manual or electric; 4'main bearings:bearing or copper bush or nylon bush; 5'the machine is equipped with an overlaod protection device to prevent the major components from being damaged due to overloading. 6'the machine is also equipped with an emergency device. When an emergent accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable. 7'the machine is equipped with scraper and wind-up unit, which can take the reclaimed rubber away from the wind-up roller
Xh-401ae two roll mill The main function of this machine is to ensure your products¡¡¥ quality and colors meet exactly the demand of your clients¡¡¥; afterwards the experimental results and the right proportion can be applied to production lines. This machine is capable of mixing raw materials and accessory ingredients evenly for testing. Technical parameters rade Temperature controller: rkc from japan Heating mode: electric heating Temperature precision: +-2 degree centigrade Motor: one taiwan chengbang speed reducing motors Transmission mode: chain wheel and chain transmission Weight: about 500kg Note: the main configuration is as follow: Rkc temperature controller (japan); temperature sensor (japan); omron relay (japan); shilin contactor (taiwan); yangming ssr (taiwan); ckc timer (taiwan); taiwan taizhan heating tube (taiwan); taida frequency converter, etc. Wooden case, international standard
Type : vulcanizer Place of origin : shandong, china (mainland) Brand name : go world Model number : xlb Power(w) : 18.5 Model number : xlb-d1400x8000. Minimum order quantity: 1 set/sets Packaging details: packed in wooden case or canvas Delivery time: according to order size, general is a availability on Payment terms: L/C, T/T Supply ability: 6 set/sets per month
(1)safety A. The waste gas produced during the process is alkyl from c1 to c4, which is dangerous when burning directly. In our process, it is firstly transferred through waste Gas recycle system and a safe device spray gun. Before burning, we should ensure the safety of production. B. Pressure gauge, alarming device and safety valve. (2)environmental protective A. Effective water dedusting system can avoid black smoke. B. The exhaust gas will be recycled for heating reactor to save energy and no pollution C. Every junction of the reactor is in good sealing situation with professional sealing material. D. Waste solid. The solid residua will be left in the reactor. Its main component is black carbon.It can be the raw material industrial black carbon. Also could be mixed with the pulverized coal ash as raw material in thermal power plant, also could be the raw material of pulverized coal ash brick (one kind of environmental protective building material). Container
This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder. Wooden case for usual size
Mould size: length 215mm with 3 cavity; Heating capcity:1000w each mouldating can finish within 20min. Length:1020mm Height:1900mm Width: 960mm.
Primary parameter of which as following:tansferring volume:150cc/180cc;transferring strength :27tons; Transferring manner: from bottom to top; heating platen size:300300 and 300400; heating platen material :45steel.This type of machine is very good , primary advantage of which as following: heating temp.Is very uniform; transferring speed and volume can be easily controlled and cycle running is soomth;structure of machine is very compact , simple and pretty and by which people can operate easily and safely. Length:1550mm, height:2620mm, width:620mm.
Waste tyre oil refining plant 1. High oil yield 2. Unique exhaust removal system 3. En-friendly.
Number Items Introduction 1 Model JZB-5 JZB-8 JZB-10 2 Raw material Waste plastic and rubber Waste plastic and rubber Waste plastic and rubber 3 Structural form Horizontal Horizontal Horizontal 4 Capacity/day About 5 tons About 8 tons About 10 tons 5 Pressure Atmospheric Atmospheric Atmospheric 6 Rotate speed of the reactor 0.4R/min 0.4R/min 0.4R/min 7 Cooling form Water Water Water 8 Heating form Direct Direct Direct 9 Installation mode Base Base Base 10 Noise db(A) 85 85 85 11 Working mode Intermittent Intermittent Intermittent 12 Size of reactor 2200¡Á6000 2200¡Á6600 2600¡Á6600 13 Volumeof reactor 16 m3 19 m3 23m3 14 Weight of reator About 5 tons About 5.5 tons About 6 tons 15 Production cycle 12 days 12 days 12 days 16 Installation cycle 12 days 12 days 12 days.
ITEM CONTENT 1 MODEL PYROLYSIS PLANT LY-15 (CONTINUOUS) LY-18 (CONTINUOUS) LY-20 (CONTINUOUS) LY-22 (CONTINUOUS) 2 RAW MATERIAL waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber 3 STRUCTURE Horizontal rotation Horizontal rotation Horizontal rotation Horizontal rotation 4 16-HOUR HANDING CAPACITY/PER BATCVH 3-4 tons of raw material 5-6 tons of raw material 6-8tons of raw material 8-10 tons of raw material 5 16-HOUR OIL PRODUCTION 1.2-1.6 tons of fuel oil 2-2.4 tons of fuel oil 2.4-3.2 tons of fuel oil 3.2-4 tons of fuel oil 6 WORKING PRESSURE Room pressure Room pressure Room pressure Room pressure 7 HOST SPEED 0.4r/m 0.4r/m 0.4r/m 0.4r/m 8 POWER 3.0KW 4.0KW 4.0KW 5.5KW 9 COOLING Water cooling Water cooling Water cooling Water cooling 10 COOLING WATER CONSUMPTION 3 4 6 8 11 TRANSMISSION Internal gears Internal gears Internal gears Gears 12 HEATING MODE Directly heating Directly heating Directly heating Directly heating 13 INSTALLATION(T/H) Have basis Have basis Have basis Have basis 14 NOISE DB(A) ¡Ü85 ¡Ü85 ¡Ü85 ¡Ü85 15 HOST DIMENSIONS 1500x6000 1800x6000 2000x6000 2200x6600 16 WORKING FORM Continuous operation Continuous operation Continuous operation Continuous operation 17 HOST WEIGHT (T) 15 17 19 22 18 EQUIPMENT MANUFACTURING CYCLE 20 days 20 days 20 days 20 days.
Precure Tread Press has a H-frame structure that offers unsurpassed structural strength. It is designed to withstand high press indefinitely. The result of the curing tread will have even thickness throughout the whole tread, which is one of the key factor determining the quality of the tread. Differ than common C or G-frame structure, the H-frame structural intergrity allows 1150MT maximum pressure for the manufacturing of the precure tread. The conventional C-frame structure offers less structural strength, the top frame will crack or show signs of cracking over time and resulting in unevenly cured precure tread with lop-sided thickness. Besides, Acten Precure Tread Press features auto bumping capabilities to release traped air during the curing process. This differ greatly from the bumping action of the normal C-press. The auto bumping of Acten Press will not lift the rubber away from the sipes completely and thus preserving the mould. Acten Press also featuring user friendly quick load and unload device which is time-saving. Acten Precure Tread Press is well known for its design, advanced features and superior performance. We constantly update our range and secifications to take advantage of new technology and design improvements. User friendly features are considered important design parameters for we know very well the extreme conditions working beside a 160c heated press.
Acten Turnkey Project offers our customers complete transfer of technical know-how from formulationg design, mixing technique, on-site training to quality control. We are able to help our customers in obtaining the state-of-the-art mixer and know-how, to supply quality masterbatch for the industry. We have discovered a need to offer our customers an alternative to manufacturing Masterbatch by supplying pre-formulated and pre-mixed Masterbatch, tailored according to cost and performance. In order to achieve this, we have engaged the services of specialist custom compounder in Malaysia renowned for supplying the new tyre industry. The complete plant equipments include: 1. Feed Stock Hydraulic Cutter 2. Kneader (with different capacity) 3. Roll Mill (with various sizes and usage) 4. Batch-off Machine 5. Rotary Cutter.
Acten Turnkey Project offers our customers complete training on achieving the correct profiled rubber dimension for further processing into precure tread at a later stage. Certified skills in operating the extrusion line can be attained in a short period of time. The extrusion line that Acten offers includes: -2 roll mill -Hot/Cold/Pin-cold feed Extruder -Cooling trough -Profile identification marker -Pneumatic cutter.
Acten Sanding Machine is famous for its excellence performances and durability. Acten provide the machine accordingly to customer's needs, ranging from single head sanding machine up to four-head sanding machine. Acten's sanding machine could perfectly sand off the oxidize surface of the tread liner, without affecting the tread depth, with the perfect precision. Also, our machine's performance will not be restricted due to different patterns, which is one the most important cost-effective factors. The tread sanding line prepares the cured precure tread for shipment readiness. The process involves buffing the precure tread to the desired texture, cementing the buffed surface and packing to form a compact roll backed with plastic sheet pretection. Acten machines are designed for simple operation with many user friendly features. Extensive training is not required to operate the very efficient Acten's tread sanding line. We offer single head, twin head, three head and four head sanding machines. Each different models have distinctive features in order to handle different production capacity. Also, We also offer the complete sanding line that come with auto-cementing and auto-coiling machines. Our complete line is cost-effective and has the user-friendly features.
Acten is able to provide the complete set up of tire retreading plant as well with the transfer of technology know-how. Our offer includes: -Initial and Final Inspection Machines -Buffing Machine -Cementing Mixer -Building Machine -Enveloping and Rimming Machine -Curing Chamber -Complete Monorail System Acten promises to provide quality products and machines for the retreaders, ensuring its safety to use, extending its durability. Most importantly, Acten provides high quality machine at a very reasonable price, which could help add on the competitive advantage of the retreaders.Acten understands that in the highly competitve retreading business, skills and experiences are the major factors that distinct the retreaders from other rivals. Thus, the transfer of know-how from Acten is very important. We have been continuously evolving ourselves to meet the trend and backed with our experiences, Acten will help the investors obtain the unique competitive advantage.
This set of rubber-plastic foaming production line adopts the most advanced technology equipment on manufacturing and processing rubber -plastic products. It is suitable for making the shoe materials, EVA foaming sheet packaging material, EVA foaming type slippers, EVA bedding for children, yoga, and other rubber-plastic foaming products. According to the output every day, can determine the number of equipment and the specifications . Wooden case.
