Chemical Name: 2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Molecular Weight:167.26 Product Standard: GB/T11407-2003 Cas no: 149-30-4 Specification Item Top Grade First Grade Qualified Grade Appearance (Visual Inspection) Yellow Powder Initial M.P.,173.0 171.0 170.0 Loss on Drying%,í_ 0.30 0.40 0.50 Ash%,í_ 0.30 0.30 0.30 Residues(150)%, 0.00 0.10 0.10 Properties: Yellow powder.Slightly foul odor and bitter taste,nonpoisonous. Specific gravity: 1.42-1.52. Soluble in ethyl acetone,acetone,dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: The product is a hemi-ultra accelerator, extensively used in vulcanization of natural and synthetic rubbers. Mainly used in the manufacture of rubber tires, rubber belts, rubber shoes and other industrial rubber products. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Specification Item Top Grade First Grade Qualified Grade Appearance (Visual Inspection) Gray-white powder Initial M.P.,íµí¦ 170.0 165.0 162.0 Loss on Drying%,í_ 0.30 0.40 0.50 Ash%,í_ 0.30 0.30 0.70 Residues(150)%, 0.00 0.10 0.10 Properties: Gray-white powder with litter bitter, no poison. Specific gravity: 1.45-1.54. Soluble in chloroform slightly soluble in benzene, ethyl alcohol and carbon tetrachloride. Insoluble in gasoline, water, and ethyl acetate. Application: Used for natural and many synthetic rubbers. Mainly used in the manufacture of tires, hose, footwear,tape and genera industrial products. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 20kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Specification Item Top Grade First Grade Qualified Grade Appearance (Visual Inspection) Gray-white or white powder Initial M.P.,íµí¦ 99.0 98.0 96.0 Loss on Drying%,í_ 0.20 0.30 0.50 Ash%,í_ 0.20 0.30 0.40 Residues%, 240um:0.5 240um:0.5 100um:0.1 Properties: A slight odor. Specific gravity:1.31-1.34.soluble in benzene, chloroform,carbon disulfide; insoluble in water. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by DPG, TMTD and TMTM. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Specification Item First Grade Qualified Grade Appearance (Visual Inspection) ííWhite powder Initial M.P.,íµí¦ íí142.0 140.0íí Loss on Drying%,í_ íí0.40 0.50íí Ash%,í_ íí0.30 0.40íí Residues(150)%, íí0.50 0.50íí Properties: No odor and poison.Irritating to the skin and the respiratory tract. Specific gravity: 1.38-1.44. Solluble in chloroform, acetone,benzene;hardly soluble in carbon tetrachloride, ethyl alcohol &insoluble in water or gasline. Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphue-cures elastomers. Scochy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV a retarder in the vulcanisation of polychl or oprene rubber with ETU. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Properties: Amber to brown flake or granular. Gravity 1.05, soluble in benzol, chloroform and acetone, nonsoluble in water, but little soluble in petroleum hydrocarbon. Application: The product is mainly used for natural rubber, butadiene nitrile and chloroprene rubber etal, Used in tyres, industry rubber and so on. Storage: Keep container tightly closed in a cool, well-ventilated place. Packaging: 25kg bag. Polypropyrene knitted bags lined with polyethylene bags.
DMDBH curing agent Apperance: past Assay: 45% CAS: 78-63-7 Molecular weight :290.4 Active oxygen content peroxide :11.02% Cas no. :78-63-7; 68083-18-1 Einecs/wlincs no. :201-128-1 Tsca status : listed on inventory DMDBH is a bifunctional peroxide which is used for the crosslinking of silicone rubber Appearance : Transparent evenly paste Assay : 43.0-45.0% Density, 20ípC : 0.870 g/cm3 Flashpoint : 56ípC Freezing point : 6ípC Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, we recommend a maximum storage temperature (TS max.) for each organic peroxide product. For DMDBH TS max.= 30 ípC When stored under the recommended storage conditions, DMDBH will remain within the specifications for peroxide of at least 6 months after delivery. Thermal stability Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test. Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Acumulation Storage Test. For DMDBH SADT: 80ípC Packing and For DMDBH, the standard packaging is 18kg/drum. Transport Safety and handling: Keep containers tightly closed. Store and handle DMDBH in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Void contact with reducing agent (e.g.amines), acids, alkalines and heavy mental compounds (e.g. accelerators, driers and metal soaps.) Applications DMDBH is used for the crosslinking of silicone rubber. Rubber compounds contain DMDBH have excellent scorch safety. Safe processing temperature: 135ípC (rheometer ts2> 20 minutes) Typical crosslink temperature: 175ípC (rheometer t90 about 12 minutes) 18kg/pail
Raw rubber.
Natural Rubber, which is obtained predominantly from the rubber tree, Hevea Brasiliensis, is an aqueous colloid of rubber containing 30-40% rubber, by mass. Getting the rubber in a dry form is a specialized process in itself. The raw is concentrated, i.e., its % rubber content is increased and proportion of non-rubber constituents is reduced by processes such as centrifuging and creaming.
IPPD 1. Product nameú¦4010NA( IPPD) 2. Chemical nameú¦N-Isopropyl-N-phenyl-phenylenediamine 3. Molecular formula: C15H18N2 4. CAS No.: 102-72-4 5. Specification Appearance: Purple to grayish brown particles Content: 97.0%min. Initial melting pointíµ: 70min. Loss on heating: 0.30%max. Ash content: 0.30%max. 6. Package: 25kg/bag. Or as customers requirement. 7. Application: IPPD is a common widespread high efficiency antioxidant synthesis of natural rubber and other rubber products, high performance for avoid ozone,flex crach,and it is also a good protecting agent for heating, oxygen, light etc. Widely used for tires, inner tubes, rubber hose adhesive tape etc. 25kg net kraft paper bag with PE bag inside or as clients' options.
1. Product name: Rubber Accelerator CZ (CBS) 2. Chemical name: N-Cyclohexyl-2-benzothiazole sulfenamide 3. CAS No. 95-33-0 4. Chemical Formula: C13H16N2S2 5. Specification Appearance: yellowish or off-white powder or granule Initial melting point (centigrade degree): 98.0min. Loss on drying: 0.30%max. Ash: 0.30%max. Sieve residue 100 mesh: 0.05%max. 6. Package: 25kg in kraft paper bag net each lined with PE bag inside. 7.Application: It is used as a after a effect accelerator giving a good scorch delay and a fast cure rates Vulcanizates obtained with CBS shows excellent physical properties. It is mainly used in making tyres, rubber tubes, shoes, rubber belt, wire and so on. 25kg net kraft paper bag with PE bag inside or as clients' options.
Mainly used in shoe-making industry, for rigid outsoles, heels, rigid foam soles, hard rubber hoses, imitation leather shoes; as well as flooring materials, rubber floor tiles and industrial products also such as rubber rollers, washers, hoses, and other rigid foam products. It is applied in sports industry, too, as for footballs, basketballs, volleyballs , roller skates, electric insulating materials, etc. In plastic and kraft paper compound bag lined with polyethylene film. Net weight: 25 kgs per bag. Keep in clean and dry, against from fire, water and sunlight. Shelf life: 24 moths.
Used as a conventional compound chemical peptizer, non-toxic and harmless to human body for no containing of penta chloro thio phenol, It may effectively promote the molecular chain breakage of rubber during mastication and prevent free radicals from recombination to large molecules, which can effectually improve the effect of crude rubber plastication and stability of plasticity, and enable good dispersibility for other compounding ingredients to ensure the homogeneity of different parts during plastication for the same batch of compound mixed material as well. 25kg/bag(paper-plastic compound bag).
Properties: It is yellow to brown schistose or granular solid, synthesized by formaldehyde, modifying agent, active agent and parasubstituted alkylphenols which have different number of carbon atom in the alkyl groups. Applications:The super tackifying resin has the characteristics of long-term effective, nice moisture stability and high viscosity-promoting ability. It's viscosity-promoting ability is similar to para-tertbutylphenolaceylene resin and superior to para-tert-butylphenol(or para-tert-octylphenol) formaldehyde resin. This product should be added under the temperature higher than it's softening point in the early period of mixing, to ensure the resinf+s homodisperse and to get the best viscosity-promoting effectiveness. It can save the use level of processing oil to a certain degree. The recommended dosage is 2-5 phr. Storage: Kept in dry and ventilating place, protected from heat and fire, the storage life is 18 months. The products that exceed storage life and qualified can be used. Package: Packed in knitted bags lined with a layer of kcraft paper bag and a layer of plastic bag. The netweight is 25kg per bag.
Gas release 275-285m/gf Decomposing temperature f, 205 f Heating decrement fn0.3% Ash content fn0.2%. Packing: carton box Gw:26kg; nw: 25kg Measurement: 380*310*360 15.3t/20gp.
Intensive mixer in China 1. The mixing chamber is forged of the jacket type providing good cooling or heating effect. Its working face is built up by welding with sintered carbide to resist abrasion and corrosion. 2. The rotor shaft is bored and welded with the banbury rotor, forming the integrated construction. Water or steam can be led through the cavity to cool or heat it. The rotor wings are built up by welding with sintered carbide on the top and two side surfaces to resist abrasion and corrosion. 3. The hydraulic sealing that is pressurized externally is used for the end faces of the rotor. The pressure is adjustable and the sealing effect is good. 4. Operation of the discharge door is driven by the double-rack tilting cylinder with the crank retaining mechanism so that installation is easy, the start pressure low, the mechanical efficiency high, and the operation safe and reliable. The discharge door is of the drillhole cooled type and the working surface is built up by welding with sintered carbide. 5. The advanced plc control technology and the intelligent display terminal are used for the control system. It provides the functions of intelligent operations and information indication in chinese characters, such as setting the control parameters to the userí»s requirement, giving appropriate prompts about the operation steps, dynamically displaying the mixing process parameters and detecting faults and giving alarms, which improves the reliability of the control system.
1. This rubber kneader machine is the first one in china. It is based on the standard-version dispersion mixer and designed and developed for the mixing process of high percentage or low percentage expanded plastics. 2. With the closed-loop temperature control system, it can adjust the mixing temperature to the process requirement. 3. It has the temperature sequence control or time sequence control function. 4. The front rotor can be regulated to rotate at a speed of 40 r/min or higher. 5. For the heating mode, the electric platen heater or the electric oil heater is provided at the customerí»s option. 6. For the stock feeding mode, stock feeding in the rear or in the front is provided at the customerí»s option.
Rolling mill manufactured by our company have the models xk-160-xk-550(560), and we also manufacture refiner and gel breaker;classified by the perspectives of product standard and technical progress, the open mills manufactured by our company are coexisting with three generations of products: The traditional models of national reserved standards, that is, single output axis, which is driven by big and small gears and the differential motion of front and rear rollers are realized by speed ratio gears. National latest standards, that is, the output of reducer is double-axis output, and the roller is directly coupled by the universal coupled by the universal coupling. As for the double-axis output models have the disadvantages of high costs, we have developed the single-axis output open mills with a relatively lower cost, and such a model is an exclusive model of our company and is favored by the consumers
Rubber mixing mills manufactured by our company have the models xk-160-xk-550(560), and we also manufacture refiner and gel breaker;classified by the perspectives of product standard and technical progress, the open mills manufactured by our company are coexisting with three generations of products: The traditional models of national reserved standards, that is, single output axis, which is driven by big and small gears and the differential motion of front and rear rollers are realized by speed ratio gears. National latest standards, that is, the output of reducer is double-axis output, and the roller is directly coupled by the universal coupled by the universal coupling. As for the double-axis output models have the disadvantages of high costs, we have developed the single-axis output open mills with a relatively lower cost, and such a model is an exclusive model of our company and is favored by the consumers
1. This laboratory kneader machine is the first one in china. It is based on the standard-version dispersion mixer and designed and developed for the mixing process of high percentage or low percentage expanded plastics. 2. With the closed-loop temperature control system, it can adjust the mixing temperature to the process requirement. 3. It has the temperature sequence control or time sequence control function. 4. The front rotor can be regulated to rotate at a speed of 40 r/min or higher. 5. For the heating mode, the electric platen heater or the electric oil heater is provided at the customerí»s option. 6. For the stock feeding mode, stock feeding in the rear or in the front is provided at the customerí»s option.
1 - Rubber powder by 90% Contents: ....... 55% synthetic rubber. 35% natural rubber. 10% other materials. *** Alboudr user is milled frames (120-124) cm. 2 - The other components by 10% Include ........ 1 - oils to complete the settlement process. 2 - Article disassembled Links sulfur. 3 - Afinua flexibility necessary for the work of the product. Each one 20 kg & packaging in poly bag.
