Freestanding container perfect for external product exposition, mounted or equipped with wheels, with roller blind with a lock.
Internal construction made of galvanized steel
Shelves û panels made of galvanized steel sheeting
Movable shelf system
External covers and roller blind runner (rolled not weld) made of aluminium, pulverized
Roller blind made of galvanized aluminium sections with two handles.
Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts.
1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating.
2. The product has a small proportion and is not easy to form precipitation in the use or final product.
3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.
Built for the podium and bred to win, the 2020 GP1800R is back and faster than ever.
Since its release in 2017, the Yamaha GP1800R SVHO has completely dominated the Australian and World Pro Stock race scene. Pro Stock racing, also known as the â??Manufacturers Classâ??, provides the best comparison of out-of-the-box performance of each manufacturers race ski offerings.
From short course to long distance offshore endurance racing, no other watercraft model has achieved as many victories as the GP1800R SVHO over the last three years.
Engine Type: 4-stroke, 4-cyl DOHC, 16-Valve, Super Vortex High Output Marine Engine
-roller blind runner û aluminum profile 37mm lined with a foam û pulverized,
-runner section û aluminum system runner with a brush seal û pulverized,
-sides û aluminum sheet 2mm û pulverized,
-selves û sheet 1mm - galvanized, supporting -system û tegometall solution - galvanized,
-safety lock û locks but also gives an option of a partial runner clamp which gives a secure, half-open position,
-baseboard with a rubber pad ,
-possibility of application of a anti theft protection û transparent panel made of plastic (option),
-fixing û permanent(fixed to the ground - stretcher stud), or mobile(wheels-option),
Dependant on order volume, parts packed separately in a bubblewrap
We offer you high-quality planed boards of various sizes and profiles.
Thickness from 14 to 45 mm, width from 90 to 150 mm, length 3000 and 6000 mm. Grades 1-2 and 3 separately.
�?�?�¾�?�¸�»�¸: Decking planks, boards for terraces, straight planken and skewed planken, Imitation log siding, block house, floor boards, Facing board "batten", Bar joist.
FOB Kirov region, Russia. Worldwide delivery is possible. Volume from 45 to 1000 m3. The price is 315 $ m3.
Edged board made of pine
We offer you a high-quality edged board made of pine of various varieties and sizes.
Thickness from 18 to 150 mm, width from 90 to 200 mm, length 4000 and 6000 mm. Grades 1-2 and 3-4 separately.
Natural or transport humidity is 16%. FOB Kirov region, Russia. Worldwide delivery is possible. Volume from 45 to 4500 m3. The price is 190 $ m3.
Our company produces and sells high-quality pine boards modified in thermal chambers. The board has various sizes and profiles plank, decking and others. Grade AB, thickness from 16 to 45 mm, thickness from 30 to 200 mm, length from 2000 to 6000 mm. The board is not afraid of moisture and sun, does not crack and does not lose color and shape. Volume up to 200 m3. The price is$ 1250 per m3.
We offer you a high-quality edged board made of birch, size 21x100x2000-3000 mm. Humidity is 16%. Grade AA, AB. Sawn on circular saws. The price is 300 $ m3. FOB Perm Krai, Russia. Worldwide delivery is possible. The board volume per month is up to 150 m3.
Key Specifications/ Special Features: We got second hand used laptop and all are in good shapedelivery is all over the worldWe makle sure delkivery is always on time to make sure we satisfy all our clients all round the worlsWe assure our buyers of a good quality products and a good service that establish a long terms business relationship between the us and we also assure a safe delivery to our buyers doorstep anywhere in the world as we handle custom charges/Insurance /Tax and handling charges till shipment get deliver to buyers door step.What are the shipment terms ?A: Express( DHL, FEDEX, TNT, UPS).*Takes 3-5 Days express delivery*Tracking number will be sent to you after shipment.RETURN POLICY :This product is in a guaranteed good condition. If for some reason you are unhappy with your purchase notify us within 60 days after you receive the item. All returned items must be in their original condition and packaging and full refund of total funds includes transfer charges would be made.Shipping InformationProducts DescriptionModel No.CYT-N135ChipsetCeleron N3350OSWin11.0/Win10.0RAMDDR3 4GBROM64GB(128GB/256GB/512GB/1TB/2TB optional)Screen14inches TN 1366*768Battery7.6v 4500mAH big BatteryCamera,Front 0.3MPWiFiWIFI 802.11ac/b/g/nSoftware Languagemulti-langauge support (default English)Colorcustomizable
- voltage ranges from 1.4 V up to 750 V,
- current ranges from 5 mA up to 100 A with a galvanic insulation of
outputs,
- frequency ranges from 40 Hz up to 1250 Hz,
- power generation from 0 W up to 3 x 75 000 W,
- voltage and current accuracy 0.05%,
- power and energy accuracy 0.8%,
- harmonic course generation,
- synchronization with supply frequency,
- RS-232C, IEEE488 interfaces,
- measurement of DC voltage and current up to 10 V and 20 mA,
- setting optional parameters: U, I, P, E, cos, t.
INMEL 8033 Calibrator is a three-phase electric power and energy calibrator. It generates voltages of equal rms value on three voltage outputs and currents of equal rms value on three current outputs. The voltage on voltage output and the current on current output are shifted between them by set phase angle. Against to the previous model calibrator type INMEL 33, the new device INMEL 8033 one characterize less voltage, current, power and angle generation error, has also wider frequency range of quantity generate and richer program function set. The most important from program functions is the possibility to generate harmonic course. The main distinctive feature of INMEL 33 from INMEL 8033 is digital method measurement generating and stabilization output signals.
Application:
Checking ang calibration:
- Wattmeters, varmeters,
- phase meters,
- frequency meters,
- AC of voltmeters and ammeters,
- power factor and phase angle meters,
- measuring transducers,
- watt-hour meters in single and three-phase system,
- power engineering protections.
Parameters:
- simulation and measurement:
thermocouple signals J, K, T, R, S, B, U, L, E, N, with auto-compensation of terminal temperature, signals in thermocouple and thermostat system, resistance thermometer signals: Pt 100, Pt 500, Pt 1000, Ni 100, Cu 100, resistance signals from 10 up to 5 ,
voltages and currents in range: -11 V...+11 V and 22 mA...+ 22 mA
- accuracy 0.025%
- STEP and RAMP function,
- led out 24 V terminals,
- RS 232C interface,
- available in the option for pressure calibration.
The INMEL 60 calibrator is destined to check and control systems, industrial automatic control engineering devices such controllers, recorders, meters, etc.
This instrument has the possibility to generate and measure signals from ten thermocouples, five thermometer resistances, four voltage ranges, two current ranges, two resistance ranges. Thermoelectric terminals have an internal temperature measurement and for this reason make possible the generation or measurement of thermoelectric signals with the compensation for the given thermocouple. In this working mode, a real thermocouple is added to thermoelectric measuring terminals, and compensation conductors to thermoelectric generating terminals. The calibrator ensures the simultaneous generation of the signal on output terminals and the measurement of the signal on measuring terminals, thanks to this feature the calibrator is suitable to check transducers.
The INMEL 60 calibrator enables to check two-wire transducers. the used graphical display contains a lot of information on a screen with a good readability. The display ground-lighting, which can be switched off, is especially useful in conditions of an insufficient lighting.
The internal supply from the battery enables the work not only in laboratory conditions but also on the object. The calibrator can also be used to the maintenance and servicing of industrial measuring instruments, systems and electronic equipment.
Application:
Checking and calibration:
- measuring transducers controlled by a voltage or current signal, a thermoelement or resistance thermometer,
- two-wire transducers,
- temperature meters,
- pressure transducers,
- manometers,
- measuring and control lines.
- Voltage ranges from 200 V up to 1000 V,
- Current ranges from 200 A up to 20 A,
- Frequency ranges from 20 Hz up to 100 kHz,
- Resistance from 1 up to 19 M,
- Voltage accuracy from 35 ppm,
- Current accuracy from 150 ppm,
- Ample software,
- High output load,
- RS 232C , IEEE488 interfaces.
The INMEL 7000 calibrator is device with very high precision and simultaneously high load, thanks that it pulls ones weight very well with checking modern type as well older types of meters.
It is characterized elastic and open systemic structure. We offer varius version of this calibrator from very simple e.g the DC voltage calibrator up to full configuration : DCV, DCI,ACV,ACI and R.
Thanks to ergonomic desc and rich internal software the INMEL 7000 calibrator is very handly.
In calibrator INMEL 7000 used modern construction solution, in which used new generation of electronics elements of renowned worldwide companies. Thanks that ones received very good metrological parameters, reduced quantity of compnents, and in this way augment the reliability of this calibrator.
Application:
Checking and calibration:
- AC and DC voltmeters,
- AC and DC ammeters,
- frequency meters,
- measuring transducers,
- ohmmeters.
- Voltage ranges 0.2 do 1000 V,
- Current ranges od 20 mA do 20 A,
- Frequency ranges od 40 Hz do 5000 Hz,
- Voltage and current accuracy DC 0.02%,
- Voltage and current accuracy AC 0.05%,
- Load carrying capacity 40 VA,
- Serial interface RS232, USB, Ethernet.
The INMEL 1000 calibrator was made on base of modern componenets of microprocessor technologies. Applicated technologies are comparable with technologies used by leading global companies.The INMEL 1000 calibrator characterize oneself the innovative structure of operation in range of output signals and operation of measuring and regulatory loop.For AC course possible is the synchronous operation with the main. This possibility influence on output parameters, reliability, comfort of work, the communication way with user and external devices. The calibrator INMEL 1000 fulfils directives of the European Union within the range safeties and the electromagnetic compatibility:The production of the INMEL 1000 calibrator does not create threats for environment.
Application:
Checking ang calibration:
- AC and DC voltmeters,
- AC and DC ammeters,
- frequency meters,
- measuring transducers.
- voltage measure: 0 100mV, 0 10V,
- current measure: 0-24 mA,
- voltage generation: 0 100 mV, 0 10V,
- current generation: 0 24 mA,
- voltage accuracy: 0.02% + 2 digits,
- current accuracy: 0.015% + 2 digits,
- loop power output: 24V
Calibrator INMEL 50 integrate generation and measurement function of electric signals, used in automatic industry.
The main features of this devices is high accuracy and resolution of generating or measuring signals, friendly operation and large display.
Application:
Checking and calibration:
- measuring transducers,
- measuring and control lines,
- current loop.
