Petroleum Oil Related Products Suppliers and Manufacturers

Usage: + Industry of food and agro-product processing + Industry of food processing + Manufacture of military anti-toxic masks + Exploitation of mineral, gold refinery, steel refinery + Manufacturing industry of chemicals, oil and gas, pharmaceuticals + Purification of drinking water, tap water, industrial waste water and civilian water.

Specification: Biochar is a carbon-rich product made from renewable agricultural waste residue like coconut shells, corn cobs, cotton stalk, coconut husk, fronds, bagasse etc. It is produced by pyrolysis (heating in the absence of oxygen) that acts as a sustainable and permanent soil amendment. Research findings and experience on the field show that there is an increase in crop yields by using Biochar Soil amendment. It is a soil amendment that is plowed-in only once and has a lasting effect for centuries. Biochar enhances soil fertility by stimulating biological activity, improving soil nutrient and water retention, and also increasing organic matter. It is completely sustainable as the biomass comes from readily available and sustainable agricultural waste. Furthermore, the carbon in the biochar becomes locked up in the soil, removing carbon from the atmosphere. The main scientifically approved reasons that biochar amendments have resulted in measurable improvements in soil productivity are that it: Enhances soil biology (40% increase in mycorrhizal fungi) Improves nutrient retention in soils (50% increase in Cation Exchange Capacity) Improves the water retention capacity of soils (up to 18% increase) Increases the pH of acidic soils (1 point pH increase) Increases soil organic matter

We offer powdered activated carbon (PAC) with particles smaller than 80 mesh size. Though ultimately we collaborate with you to select the appropriate activated carbon based on treatment goals, systems and variability of compounds to be removed, the adsorption qualities of PAC make it an ideal option

We offer granular activated carbon (GAC) with at least 90% of the particles greater than 80 mesh size Though ultimately we collaborate with you to select the appropriate activated carbon based on treatment goals, systems and variability of material to be removed, the adsorption qualities of GAC make it an ideal option

Activated Carbon: Product Origin : Delhi, India Key Specifications & Special Features : "We have carved a niche in the industry by engaging ourselves in manufacturing, supplying and exporting superior quality Activated Carbon Powder. In order to satisfy the needs of clients, this powder is processed using premium quality ingredients and other compounds. We stringently check this powder on various criteria like accurate composition and purity. This powder is suitable for drug, pharmaceutical and dyes industries. To ensure secure shipment, this Activated Carbon Powder is packed in tamper proof packaging. Striking characteristics: Soluble in water & acid High degree of porosity Non contaminated"

Activated Carbon Powder: Product Origin : Delhi, India Key Specifications & Special Features : Washed Activated Carbon Powder contains less Iron, Ash, Acid & Water Soluble Matter. It passes through I.P., B.P., & U.S.P. parameters. So, it is quite suitable for Bulk Drug Industries etc.

Activated Carbon: Product Origin : Delhi, India Key Specifications & Special Features : Unwashed Activated Carbon Powder contains high Iron, Ash, Acid & Water Soluble Matter compared to Washed Activated Carbon Powder. So, it is quite suitable for Dyes & Intermediates Industries, Fine Chemicals etc.

Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Pelletized Activated Carbon Pelletized form are activated carbon compressed into formed cylinders, and have wide variety of uses removing contaminants such a volatile organic compounds (VOC's) and mercury from natural gas as well as controlling odor.

PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.

Exxon S-150 - a liquid solvent used in many industrial applications such as fuel additives, paints and coatings, pesticide formulations, industrial cleaning, and process fluids. Size: 55 Gallons

BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.

Used Engine Oil

MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max

TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium

As a direct Business Facilitators of various Oil Refineries, we have the broad direct authority to engage on the sale of D2, D6 Diesel Oil Gost 305-82, Jp54 Aviation Jet Fuel, LNG, LPG, Mazut M100, Automotive Gas Oil (AGO), Petcoke, Gasolines, Crude Oil on behalf of the seller. Either Spot transactions on FOB/CIF deliveries or contract to any world safe port (ASWP). Refinery Procedures are standard and prices are very competitive.

Jet Fuel A1 91/91

Russia D2 Gas Oil

GOST 10585-75/99