Automatic horizontal baling press tb-050510 series can compress shredded paper or plastic films. It's constituted by 10hp(7.5kw) motor, 125mm ram, 25 tons press force, and the capacity is 1.5 tons per hour. It's designed for various paper makers with small plant and low capacity demand. Tb-050510 was fabricated with rigid body which can make it very durable. Also, it has strong power including hydraulic unit, cylinder and 3 ways neck tension to compress loosely waste papers into tightly bales.
Automatic horizontal baling press tb-1011 sereis is constituted by dual motors(from 40~75hp), 100 tons press force(140 tons also available). It has a capacity from 10~18 tons per hour and makes the bale weight up to 1 ton. This paper baler can be used for baling a wide range of objects such as carton boxes, corrugated papers, magazines, cardboards....Etc. Suit for general recycler who need great capacity.
Automatic horizontal baling press tb-070840 has 35 or 50 tons pressing force and 3.5~4.5 tons per hour capacity with 40hp(30kw)motor and 150(or 180)mm ram cylinder. It's suitable for scrap materials like smaller paperboards, trimmed papers or plastic films. There is a door opening in the middle of the machine to be fed the waste materials. It can be customized according to the user's requirement. Customers can choose the convenient way of feeding from air cyclone, conveyor or manual.Tb-070840 is very functional and useful for recycling collectors and paper manufacturers especially with lower capacity demand and small scale. We had designed a hopper in the middle of the machine to be fed the waste materials. It can be customized with different demand. So users can choose the way of feeding from air cyclone, conveyor or manual. Furthermore, all of the tb-0708 series have the initiative twin-cylinder and trouble-free isolated twisters which can tie the bale automatically.
Vertical waste baling press Compact in small floor area 1.High speed cycle time with strong pressing force 2.With retaining claws 3.With auto bale ejecter 4.Safe and easy operation
1. Cross cut shredder w/ credit card shredding function 2. Cut size: 4x28 mm(paper) 3. Entry width: 220 mm, 4. Shred capacity: 6 sheets (75g/©o), 1pcs( credit card) 5. Basket volume: 6 l 6. Noise level: around 60 db(a) 7: can shred paper, credit card, staple Unit size: (mm)198x273x355 Mastercarton size: (mm)506x335x428 N.W /unit: (kg)3.8 N.W/g.W per innercarton: (kg)3.8 / 4.5 N.W/g.W per mastercarton: (kg)7.2 / 9.45 Quantity per mastercarton: (pcs)2
Screen area: 0.5m2~2.0m2pulp consistency: below 3.0% capacity: 30~260t/dpulp inlet pressure: 0.1~0.25mpaapplication: pulp mill for waste paper or wood pulp to remove heave impurity and coarse screening the pulp. Email:kevin@hengbon.Com
Screen area: 0.4m2~6.0m2pulp consistency: 0.8~3.0%capacity: 18~600t/dpulp inlet pressure: 0.1~0.4mpa.Application: pulp mill (stock preparation).
Stainless steel cylinder mould Feature:1. Increase the area of filter water and improve capacity high. 2. Improve the quality of paper, such as formation, gram weight and the rate of tensile force with latitude. 3. Decrease consumption of felt and copper wire mesh. 4. Reinforce the wholeness and rotproofness of equipment, and expand the using life. 5. It has already produced crossing net, reeling net and inclined net.
ModelCbs-1100htm PaperWeightWidthLength 100-350g/©o550-1100mm400-600mm Finished bagBag bottom widthWidthLength 80-155mm180-330mm280-450mm Making speed40-80 pcs/min Total power3kw Voltage380v/220v Machine dimensions6001200120mm.
This cutter is applicable to all kinds of printing paper, kraft paper, glassine paper, books, leaflets, cards as well as all kinds of plastic, leather and metal foil, etc. Structural features: 1.Add-type air cushion platform, light control, dual digital display, lcd screen, the data resolution of 0.05mm, positioning accuracy of ¡à 0.15, 2. Concentration of fuel injection systems, optical line of the knife, mechanical rotation, quick tool change; ball screw and dual guide to push the paper runs a smooth light, low noise, accurate positioning, significantly improve the cutting accuracy and speed, and extend the life of the machine; built-in safety protection devices bed knife, cutting through the protection and automatic back-bit cd and other security devices; 3.Optional chrome and with air-cushion table, enhance operational efficiency; 4.Optional optical bench argon-plated, long-term use to prevent operator eye fatigue; 5.Centralized lubrication systems, security systems designed according to iec standards; 6.Model based a high-end computer program controlled, mid-range dual digital display, digital display and many were single (economic type) system, style diversification. Export wooden case
Dch0906 paper box die cut plotter sample flat bed cutting machine Blade, pen, creasing, wheel, servo motor Effective cutting area(mm)900*600 It is used in carton factory&color printing factory, it can cut and crease 2mm card paper and e corrugated paper Max speed 1000mm/s Smallest cutting diameter 1000mm/s Maximum cutting thickness 2mm card paper and e corrugated paper Control line and driver servo Vacuum 1.5kw Data form 220v10%50hz Data port pci port Data transmission speed 100mb/s Using dimension (mm) 1340*1070*1070 Input cushion area 32mb.
1.Power single phase 220 v, 50hz, 800w. 2.Function of machine: Specialized in rewinding the ink side in /out , wider ribbon roller to narrower ribbon rolls It is with edge cutting function, when rerolling the defective ribbon rolls, the edge of the ribbon can be cut off to make both ends of the ribbon rolls much tidy. And this can be also used for cut the ribbon from wide one to several narrower ones. 3.Unwinding width within 240mm, length within 1000m( dia.100mm) or it can be specially designed . 4.4rewinding width from 20-240mm.
GY-41 rigid box folding in machine is use to bend the extruding parts of the surface paper into the boxes.This machine has simple structure, convenient operation and fast speed features. It is used to side fold various sizes and shapes of paper boxes and the sizes and shapes can be adjusted 1 right angle platform for double side inner folding onto the paper box. 2 equipped with sensor to control the device. 3 platform can be adjusted according to the depth of the boxes. Model GY-41 Case size 420*420*150mm Speed 20-30 units/min Power 0.5kw, 220v Weight 240 kg Dimension 1000*700*1000.
Length: 1200mm Diameter: 50mm~150mm Paper Wall: 0.5mm~5mm Cutting Way: by air Power: 1.1KW Cutting Units: 8sets Size Of Disc Knife: 110x27x1.5mm. Weight: 0.8 ton Dimension: 2000x800x1200mm.
Tube Diameter: 30mm~300mm Tube Wall Thickness: 0.5mm~12mm Speed: 3-15m/min Cutting Length: Max 4000mm, flowing cutting controlled by photoelectricity switch. Power: Main Machine 5.5kw; Cutting: 0.75kw Control way: Frequency conversion; Multipoints in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel: 320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft: 1pc (with plating chrome) 3"or by order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel, with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides (15layers),1 set glue tank. With heating bonding device for inner aluminum foils. Wegiht:3.2t Dimension: main machine 3200x2000x1800mm.
Tube Diameter:20mm~300mm Tube Wall Thickness: 0.5mm~20mm Speed: 3-15m/min Cutting Length: Max 4000mm,flowing cutting controlled by photoelectricity switch Power: Main Machine 15kw; Cutting: 0.75kw Control way: Frequency conversion. Multi-points in-phase control Transmission Way: Screw umbrella gear wheel Size of wheel:320mm Cutting Way: Automatic cutting Belt way: Both right side and wrong side are ok Belt: circle nylon ,1pc Paper shaft:1pc (with plating chrome) 76mm or by the buyers order Glue System: ship, both sides of paper layer Paper-putting Frame: whole jointing steel,with little crane Bottom paper and face paper has own paper putting frame Sending paper from both sides,1 set glue tank. Weight: 3.2t Dimension: main machine 3200x2000x1800mm.
1, Paper roll width : 1400mm 2, Sheet accuracy : 0.3 mm 3, Optional equip with Germany Synchronization controller, accuracy : 0.2mm 4, Max. cutting speed : 300 m/min 5, Max. rotation speed : 400 r/min 6, Sheeting length : 300 ~ 1550 mm 7, Sheeting thickness : 180 ~ 400 gsm. Sheet pilling height : 1400mm Weight : 12ton.
Machine specification 787mm single cylinder single nets paper machine NO. Technology parameters 1 Output paper types High-grade toilet paper 2 Raw material Waste paper, whiet paper brim, wood pulp 3 Grammage 13 40g/m2 4 Net paper width 787mm -900mm 5 Net width 1100mm 6 capacity 0.8-1.0t/d 7 Rail guage 1300mm 8 Transmission way Slow transmission with 250 type reducer. 1. Part use of the wooden case straw rope 2. Finally,according to the contract requirement.
MJZXJ-1 Automatic Folder and Gluer 1. Introduction of the machine: MJZXJ-1 automatic fold gluer consist of three parts which is feeding paper part, gluing & folding part and counting piling part, with PLC and colorful touch screen to adjust the speed, to adjust the width of carton. with easy-faster-precise-faithful controlling style, automatic feeding paper, automatic gluing and folding, automatic counting, automatic piling and output the carton, average working speed is 150pcs/min,max speed is 220pcs/min.High efficiency, save energy, enviromental is our top pursuit. 1) PLC is Delta brand made in Taiwan. 2) Colorful touch screen is Hitech brand made in Taiwan. 3) All the motor is Taiwan brand. 4) The electric part such like contactor, relay, button, knobs adopt Telemecanique brand. 5) The belt for vacuum and for transmission is Italy brand. 2. Function and characteristics: 1) Automatically finish the top folding and middle folding, meanwhile finish the glue belt stick of the upper and down part, save labor and time. 2) suitable range is wide, can be used in different size of carton, quick and convenient to adjust. 3) The machine work steady and reliable, the pasting quality is firm and high precision. 4) Easy to operate and to maintain 5) Automatic amend the carton right-angle degree. 3.Main technique parameter. 1) Max. corrugate paperboard size:1200¡Á2200mm 2) Min. corrugate paperboard size:260¡Á600mm. 3) Power:8 kw 4.Introduction of each parts 1) Folding part The first folding line is 180 degree, the third folding line is 135 degree 2) Automatic amending part: Automatic amending, make the carton with the most exactly form after pasting. 3) Counting and piling part: The finished product quantity can be counted and with good pilling, can setting the quantity of the out carton, and after pasting, the carton can be come out accord the setting number. The speed can be adjusted, can be controlled separately, the piling speed is 220m/min. 4) Control gauge part: With PLC and colorful touch screen, and adjust production speed and data-input while the machine is running, many change function of the screen. Also the carton width adjustment by this PLC and touch screen, input size, automatic adjust.
MJSF-320FX Single Facer Introduction: Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard. Characteristics: * Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent. * Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged. * Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm. * Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled. * Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection. * Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe. * The bearing of corrugated roll and press roll are lubricated and high-temperature resistant. * Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated. * Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.) * Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm. Technological Parameters: 1. Working width: 1600mm, 1800mm, 2000mm,2200mm. 2. Design speed: 120m/min. 3. Operation direction: Left or right (design as customer’s workshop.) 4. Gas: 0.4-0.9Mpa. 5. Steam pressure: 0.8-1.3Mpa. 6. Flute: UV or UVV model, can design as customer’s requirement. Diameter of the rolls: 1. Corrugated Roll: Ø320 mm 2. Press Roll: Ø320 mm 3. Gluing Roll: Ø240 mm 4. Pre-heating Roll: Ø400 mm Drive Power: 1) Main Motor: 11KW, 380V, 50HZ 2) Fan Motor: 15KW, 380V, 50HZ