At-3128 is a kind of vinegar tertiary acrylate copolymer, which is used to produce synthetic latex of water-borne metal antirust primer coating, and has good compatibility with antirust agent and antirust pigment.The products have excellent adhesion with metal substrate, resistant to water, salt water, salt fog, acid and alkali resistance.It has high weather resistance and yellowing resistance, suitable for metal rust - proof primer.
Appearance:milk white liquid
Solid content: 39%-41%
PH: 7.5-8.5
Viscosity: less than 1000 cps(3#60rpm/25 )
Particle size:0.0-0.2 micron
Tg:23
MFT:10
Ion feature :anion
Bonds immediately
Super-strong
Suitable for materials under stress
Universal
Liquid
Moisture and frost resistant
Simple to use
Resistant to temperatures between -40�°C and +70�°C
Enhance your space with our professional-grade acoustic spray, designed to reduce noise and control reverberation in open or irregularly shaped areas. Ideal for ceilings and walls in commercial, industrial, or residential settings, this seamless sound-absorbing coating blends effortlessly with any architecture.
1K Winstrip KNL400 is a neutral, yet intensive, CHC-free cold paint stripper. Based on organic solvents, it is particularly suitable for removing several layers of paint and varnish in one dip.
Fast-drying primer for heavily used iron structures. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere.
Size
1 kg
5kg
20kg
The zinc dust primer contains micronized zinc dust and an epoxy ester resin as a binder base. The product has cathodic rust protection properties and also has a sealing effect. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. The product can be used on sandblasted steel components and structures as corrosion protection, as well as for steel equipment, pipes and body parts
Winstrip KSG 650 paint stripper paste â??PH 1-2 extremely strongly acidicâ??
KSG 650 is a multifunctional thixotropic cold paint stripper based on solvents.
It is ideal for stripping wood materials.
Also ideal for all types of metals and non-ferrous metals.
Due to its thixotropic properties, it is suitable for vertical or upside down surfaces.
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors
Size
1 litre
5 litres
15 litres
Winstrip-Gel KSG600 is a multifunctional, mild-smelling, ready-to-use, thixotropic cold paint stripper based on special organic solvents and selected corrosion inhibitors. The product quickly and safely removes a wide variety of paint systems, e.g. air-drying epoxy paints, polyurethane paints, NC paints (nitrocellulose paints), acrylic paints, dispersions, wet primers and most conventional paints and corrosion protection primers. Winstrip-Gel KSG600 is ideal for stripping paint and stripping all types of wood and metal, such as aluminum, zinc, iron, etc. It is also suitable for non-ferrous metals such as copper, aluminum, zinc, bronze. The paint stripper is used for spray hooks, engine parts and for vehicles, trucks, car chassis, in boat building and for steel structures, etc. Winstrip-Gel KSG600 is safe to use and hardly drips on vertical surfaces or overhead due to its good thixotropic properties
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection.
Highly heat-resistant paint spray up to 800 for painting and protecting parts that are exposed to high temperatures such as exhaust systems, engines, grills and ovens. Quick-drying, weatherproof and petrol-resistant. Suitable as corrosion protection.
High-quality special paint for painting work on body panels and primed wood, plastic, metal, etc. Polishable, lightfast, non-yellowing, color and gloss stable, quick-drying with very high coverage.
Excellent weather resistance;
Excellent light retention and color retention. Good chemical resistance and water resistance;
With appropriate primer, good adhesion;
Fast drying, good leveling, strong covering power;
Wide range of application, good matching, can be matched with a variety of primers and used for a variety of material surface.
This product is made of acrylic resin and imported sun resistant pigment.It has high solid content,good covering power,fast drying and good weather resistance.It is more convenient to paint with special female valve and special nozzle.It can easily draw various colors and lines.
Theaoson zinc coating spray is composed of aerosol can, aerosol valve, paint liquid and propellant. This product uses bright silver powder imported from Germany. The color of the paint film produced after use has the same high-gloss galvanized color as the galvanized parts, it has the same color as the galvanized color that fades with the exposure time, so that there is no color difference in the repaired part coated on the galvanized part.
Features
High-gloss bright zinc
Color consistent with galvanized parts
Good atomization, easy to use
Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.
Base material to prepare
Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary.
Instructions:
Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.
15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.
When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again.
If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
Ending working
After spraying, it should be placed in a clean and ventilated environment for about 12 hours.
If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources.
The solution of normal problem
1. Paint film whitening: It is recommended to avoid rainy days (especially high temperature and high humidity) and the next day after continuous rain.
2. Shut up: shake evenly and spray for 3 seconds or change nozzle.
3. Spray up: low temperatures suggest using 50 â?? warm water to heat up, one-time finish spray, spray avoid angle 45 degrees.
4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to avoid a thick spray.
5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after the coating is dry and flat.
Attention
Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice.
Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 �°.
Flammable, pressure vessel, do not use near fire source.
The weight changes over time, which is normal, and the attrition rate is less than 2%/ year.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
High-gloss bright zinc
Color consistent with galvanized parts
Good atomization, easy to use
Application
It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.
Instructions:
Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.
15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.
When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 �° and spray again.
If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
Fast drying Colorful and easy to use Full paint film and high gloss
Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed;
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
Fast drying Colorful and easy to use Full paint film and high gloss
Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed;
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.
Features
Fast drying
Colorful and easy to use
Full paint film and high gloss
Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions.
Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed;
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Finishing work:
1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours;
2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
6704 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
