SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board.
Target market: EMEA/Korea/Thailand
SIM7600E-H-PCIE
* Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41
* Support 3G UMTS/HSPA+ B1/B5/B8
* Support 2G GSM/GPRS/EDGE B3/B8
* GSM/GPRS/EDGEB3/B8
General features
* Mini PCIE package
* Control Via AT Commands
* Supply voltage range: 3.0V~ 3.6V, 3.3V Typical
* Operation temperature: -40â??to +85â??
* Bandwidth: 1.4/3/5/10/15/20MHz
* 3GPP E-UTRA Release 11
* Dimensions: 50.8*31*5.35mm
* Weight: 12.6g
Specifications for Data transfer
* LTE Downlink up to 150Mbps, Uplink up to 50Mbps
* HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps
* WCDMA Downlink/Uplink up to 384Kbps
* EDGE Downlink/Uplink up to 236.8Kbps
* GPRS Downlink/Uplink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10
* USB Driver for Linux /Android
* RIL supporting for Android 2.4/4.0/5.0/6.0/7.0
* MBIM to Win8
* Firmware update via USB
* TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS
* SSL3.0/TLS1.0/TLS1.2
* DTMF (Sending and Receiving)
* Audio Playing
* USB Audio and VoLTE
* FOTA
* eCall*
Interfaces
* USB2.0 with High speed up to 480Mbps
* UART
* GPIO
* Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas
* (U)SIM card (1.8V/3.0V)
* Digital Audio through PCM
* Analog Audio (Optional)
* Embedded SIM card socket (Optional)
* GNSS: GPS/GLONASS/Beidou/Galileo*
30W-ICS Repeater:
Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System
ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
A DAS is a system of managed hubs and remote antennas that distributes a wireless signal to a series of connected indoor or outdoor multi-band, multi-technology radio heads. ... A main hub takes that signal, digitizes it, and distributes it to other hubs and radio heads via a high-bandwidth fiber optic network
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed.
A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).
2984 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify
It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
5W-ICS Repeater:
The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).
The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.
With HPC008, You will get:
High accuracy customer-flow data
Detailed data report chart
Real-time customer flow on every floor
Any change of the customer-flow data and average data
How many people in shop now
Customer-flow density at different location
Average stay time of visitor
The rate of purchase
Data can be exported in different form for analyzing and integrating
Specification
Item Specifications
Size 18.9(L)*14.5(W)*5.8(H)CM
Processor ARM cortex A7>1GHzï¼?28nmï¼?
Sensor Video Input cmos /Simplex high definition
Video Compression standard H.264, YUY2
Video Definition Adjustable
Image Processing Exposure Control/ Gain Control/ White Balance/ Gamma Correction
Video Frame rate 30fps
Measuring Range 2m
Installation Height 2.5-5.0m
Port protocol Network Interface RJ45, 10M/100M, Adaptive to Ethernet port
Protocol Standard 802.11a or 802.11b/g
Maintenance Interface Micro USB
SD card Built-in, 8 32G
Electronic Clock Built-in, RTC module
Remote Upgrade Upgrade By The Website
Physical Parameter
Size 120mm*120mm*48mm
Weight 200g
Adapter +5V/2A
Power â?¤10W/ POE optional
Hardware Monitoring Hardware Watchdog
Temperature -20+65
Model
Model Installation Height
HPC008-2.1 2.6--2.7 M
HPC008-2.5 2.8--3.0 M
HPC008-2.8 2.9--3.2 M
HPC008-3.6 3.2--3.8 M
HPC008-4 3.9--4.4 M
HPC008-6 4.4--5.1 M
The critical height, advised to choose a large lens
Remark This test results is based on persons of average 1.7M
Effective width detection 2M
Advantages
High Accuracy Rate 95%-98%
1. It counts according to person's head, so it can solve the problem when people walking shoulder by shoulder.
2. It eliminates the invalid pass by setting a counting area.
3. Different camera for different ceiling height.
Data Safety 1. Network-off protection: The data can be saved in the device for 10,000 seconds (about 3 hours), even there is no network.
2. The data can be exported in PNG, JPG, PDF form.
3. Data backup: When the IP address is changed, the data can be backed up.
Data Transmission 1. The data can be transferred to server directly.
2. It can work in WiFi network.
Data Report 1. Detailed valid in-out-stay data.
2. Data from different entrances in different shops can be distinguished.
3. Sales info can be inputted manually. It is convenient for shop to make the commercial solution.
4. With a API, the data can be integrated into POS/ ERP system.
Power Supply Adapter or POE as your requirement.
Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler / K�¼bler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
L�¼tze
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko
FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.
Our mission is to provide fair prices, reducing the cost of production for our customers.
A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website."
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Ethernet Gateways for the SIMATIC IBH Softec:
We supply a complete range of the manufacturerâ??s catalog, including the following items:
Ethernet Gateways for the SIMATIC 20266
Ethernet Gateways for the SIMATIC 20220
Ethernet Gateways for the SIMATIC 20284
Ethernet Gateways for the SIMATIC 20268
Ethernet Gateways for the SIMATIC 1150
Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler / K�¼bler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
L�¼tze
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko
FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.
Our mission is to provide fair prices, reducing the cost of production for our customers.
A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website."
The SIM7600G is Multi-Band LTE-FDD/LTE-TDD/HSPA+ and GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT1 up to 10Mbps data transfer.
It has strong extension capability with rich interfaces including UART,USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.The package of SIM7600G is LCC+LGA. The package (LCC part) of SIM7600G is compatible with SIM7600x (LTE CAT1 Variants module with LCC package). AT commands of SIM7600G are mostly compatible with SIM7500/SIM7600 Series modules. This also minmize the investments of customers, and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications.
APPLICATIONS:
Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge.
CAT5e and CAT5 compatible
IEEE 802.3af803.1at
10/100 Base-T Ethernet protection
LAN, FDDI, CDDI, ATM,WLAN
PDH, SDH, SPDH
Industrial control
Industrial POE, With High reliability and high stability
Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.
FEATURES:
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
Patent technology
TECHNICAL PARAMETER
Model POE5-48
Power Parameter
Working voltage Un 48V
Max. continuous operating voltage Uc 60V
Nominal discharge current8/20µsIn 5kA
Max. discharge current 8/20µsImax 10kA
Protection level 8/20µsUp 150V
Protection line 4/5, 7/8
Ethernet Parameter
Max. continuous operating voltage Uc 5V
Limiting voltage (10/700µs) Up Line-Ground â?¤500V
Line-Line â?¤20V
Nominal discharge current8/20µsIn 3kA
Max. discharge current 8/20µsImax 5kA
Adapt transmission rate 100Mbps
Insertion loss â?¤0.5dB
Protection line 1/2, 3/6
2984 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
