TANKII 45CT is a nickel chrome titanium wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent corrosion resistance and good wear resistance. It is highly resistant to sulfur and vanadium atmospheres up to 1825°F. It has proven to be particularly effective as a protective arc spray coating for boiler tubes in black liquor recovery boilers and coal fired utility boilers.
TANKII Cr13 is a 420 stainless steel wire, specifically designed for arc spray processes. TANKII Cr13 forms a dense, well bonded coating, with excellent wear resistance and good corrosion resistance. It is widely used for machine elements repair, dimensional restoration, and wear resistant application. TANKII Cr13 s low shrink rate characteristics allows for increased coating thickness on parts requiring heavier coatings.
We are dealing with thermal spray wires such as nial95/5 wires for bond coats.
We are dealing with thermal spray wires such as nicrti wire for boiler. And our standard packing is 15 kgs per spool. Normally we have them in stock.
We are dealing with thermal spray wires such as stainless steel 420 wire. And we have 3 tons in stock with size 1.6mm. And our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as babbit wire used for turbine. And now normally we have 1.6mm babbitt wire in stock, and our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as cual8 wire. And normally we have them in stock. Our standard packing is 15 kgs per spool.
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Product: Tin Wire Product composition: Sn42% Bi58% Product diameter: 0.8~2.0mm Product weight: 500g Working temperature: 180 â?? Melting point: 138â?? Product packaging: 20 rolls/box Product use: suitable for low temperature lead-free packaging of heat-resistant components, manual soldering iron welding and automatic welding in the field of secondary packaging of circuit boards; suitable for welding of heat-resistant components. product description: The melting point of Sn42Bi58 tin wire alloy produced is 138â??, which can meet the welding and packaging requirements of electronic components that are sensitive to welding temperature. Using its own patented technology, customizing special equipment and molds to manufacture brittle tin-bismuth alloy tin wires, the low-temperature solder has a low melting point and the welding operating temperature is 190 �°C. Lead-free low-temperature solder joint brightness, welding mechanical strength, tensile toughness and electronic conductivity have been greatly improved. . It has the characteristics of fast soldering speed and firm soldering, as well as its fine alloy structure, uniform composition, and excellent welding performance.
Product: Tin Wire Product composition: Sn96.5Ag3.0Cu0.5 Product diameter: 1.0mm Product weight: 1000g Working temperature: 380-420â?? Flux content: 2.0% Product packaging: 10 rolls/box product description: Using high-purity tin raw materials to fuse electrolytic copper and pure silver, it is refined through a special process; the rosin core of the product is made of high-quality pure white transparent hydrogenated rosin with an organic acid activator independently developed by itself, and is boiled in a vacuum-tight container. Its process is particularly reliable; according to the activity of the rosin core, it is divided into three types: R type (low activity), RMA type (medium activity), and RA type (high activity). , The solder wire has the characteristics of low smoke and high insulation resistance, and it also has the dual functions of spot welding and drag welding, which enhances the versatility of the solder wire.
Product name: lead-free tin wire Model: Sn99.3Cu0.7 Composition: Tin 99.3% Copper 0.7% Weight: 1kg/roll Specific gravity: 7.3g/cm3 Melting point: 227â?? Features of lead-free solder wire: Made of pure tin, good wettability, electrical conductivity and thermal conductivity. The flux is moderate, and the welding does not splash. The winding is neat, no knots, easy welding operation, and high work efficiency. Environmentally friendly lead-free tin wire complies with RoHS standards and sGs certification. Tin wires of different specifications can have various alloy compositions, different types of additives and wire diameters to choose the packaging method: 50-1000 g/roll, or according to customer requirements.
Product: Tin Wire Product composition: Sn99.95 Product diameter: 1.0mm (wire diameter can be customized 0.4mm~3.0mm) Product weight: 1000g (weight can be customized) Working temperature: 350-480 â?? Product packaging: 10 rolls/box product description: The lead-free solder wire Sn99.3Cu0.7 produced is made of high-purity tin raw material fused with electrolytic copper through a special process. It does not contain rosin, and its process is particularly reliable and unique in the industry. It is widely used in electronic equipment. , electronic products, home appliances, automotive electronics, medical equipment and other high-temperature welding products. , Easy to tin, good fluidity, no virtual welding phenomenon after welding. For welding large materials, it is necessary to preheat in advance and then tin to achieve the ideal welding effect. Type: Lead-free tin wire Model Number: Sn99.95 Place of Origin: China Alloy Or Not: Not Alloy SIize: Wire diameter: 0.3mm-6.0mm or Size can be customized according to customer needs. Package: 50-1000g/roll.Standard export package or as required. Payment: T/T,Western Union,L/C,etc.
Because the mesh belt is zigzag design,with the characteristics of good water permeability, air permeability and non-revealed sludge, acid-resistance, alkali-resistance, heat resistance under 180 degrees. Sludge and mesh strip peel quickly, not easy to stick mud, a large number of mud, easy to clean, fast and convenient connection, long life of the mesh. This is designed for sludge dewatering products.
Reference numberThickness Wire DiaBarb lengthBarb widthBarb spacing BTO-100.5±0.052.5±0.110±113±126±1 BTO-120.5±0.052.5±0.112±115±126±1 BTO-180.5±0.052.5±0.118±115±133±1 BTO-220.5±0.052.5±0.122±115±134±1 BTO-280.5±0.052.5281545±1 BTO-300.5±0.052.5301845±1 CBT-600.5±0.052.5±0.160±232±1100±2 CBT-650.5±0.052.5±0.165±221±1100±2
Metals ferrous and non ferrous, such as : aluminium ingots a7, copper cathodes 99.9% , copper milberry scrap 99.7%, hms 1&2, iron ore 62 64%, nickel wire etc., rapeseed oil, sunflower oil, corn oil, peanut oil, coal .
Providing metal founders, processors, turners, forgers, drawers, rollers and re rollers of steel shafting, bars, rods and etc in different shapes and sizes from scraps, billets, ingots including wire, nails, screws, metal hinges, plates, sheets, strips, hoops, nuts, rounds, circle, angles and to alloy steel, stainless steel and any other product from steel, brass, copper, lead, zinc, nickel and any other ferrous and non ferrous metals of all sizes, specifications and descriptions including ingot casting in electric furnace, ms flat bars and ss flat bars, iron rods, aluminium rods. rail scrap r50 r65, heavy melting scrap 1 & 2.
