Industrial Pumps Suppliers and Manufacturers

Submersible Pumps For Clean And Dirty Water Elpumps submersible pumps for clean and slightly dirty water are renowned for their high efficiency, low long-term costs and high operating reliability, making them ideal for a wide variety of applications. The Elpumps CT series offers high resistance to suspended solids, thermal overload protection and easy maintenance. The pumps can even be fully submerged up to 5 meters for efficient water removal, pumping clean water at low pressure with a flow rate of up to 15,000 liters/hour thanks to their powerful 600W / 800W motors. Structure: The pump motor casing and shaft are composed of INOX stainless steel, and the impeller and other structural elements are made of high-grade, corrosion-proof NORYL PPO polymer. The shaft is jointly sealed with a spring-loaded seal ring (gasket) and a modern slide-ring axial seal. Application: - Automatic pumping of clean water from wells, tanks or reservoirs - Flood irrigation in greenhouses, horticulture and small-scale agriculture - Water supply for livestock farming - Emergency draining of slightly dirty water from flooded areas or rooms - Lowering groundwater - Rainwater harvesting - Emptying of pools, ponds, sumps, flooded cellars, flat roofs and boat bilges Features And Benefits: - Powerful 600W / 800W motor - Flow rate of up to 15,000 liters/hour - Maximum immersion depth of 5 meters - Maximum suction head of up to 12 meters - Durable, non-corrosive, rust-proof materials - The pre-filter screens solid pieces of up to 5 mm - Drawing water from even 5 mm off the bottom - Integrated float switch, auto start/stop function - Fitted with 10-meter H05 RN-F 3G 0.75 mm2 cable - Thermal overload protection - 2-year guarantee

Submersible Pumps For Sewage Elpumps submersible pumps for clean, dirty and sewage water are renowned for their high efficiency, low long-term costs and high operating reliability, making them ideal for a wide variety of applications. Elpumps CT series water pumps for sewage offer high resistance to suspended solids, thermal overload protection and easy maintenance. The pumps can be fully submerged up to 5 meters for efficient water removal, pumping clean water at low pressure with a flow rate of up to 15,000 liters/hour thanks to the powerful 450W / 600W / 800W motors. Structure: The pump motor casing and shaft are composed of INOX stainless steel, and the impeller and other structural elements are made of high-grade, corrosion-proof NORYL PPO polymer. The shaft is jointly sealed with a spring-loaded seal ring (gasket) and a modern slide-ring axial seal. Application: - Reliable pumping of sewage with dirt particles up to 30 mm in size - Draining of slightly dirty water from construction sites - Automatic draining of dirty water and sewage from cesspools, wells, tanks or reservoirs - Flood irrigation in greenhouses, horticulture and small-scale agriculture - Water supply for livestock farming - Emergency draining of flooded areas or rooms - Lowering groundwater - Rainwater harvesting - Emptying of pools, ponds, sumps and flooded cellars Features And Benefits: - Powerful 450W / 600W / 800W motor - Flow rate of up to 15,000 liters/hour - Maximum immersion depth of 5 meters - Maximum suction head of up to 10 meters - Durable, non-corrosive, rust-proof materials - Able to pass solids of up to 30 mm in diameter - Integrated float switch, auto start/stop function - Fitted with 10-meter H05 RN-F 3G 0.75 mm2 cable - Thermal overload protection - 2-year guarantee

Free-Flow (Vortex) Submersible Pumps For Sewage Elpumps free-flow (Vortex) submersible pumps provide a free flow-through passage of solids and liquids, minimizing the risk of jamming and low performance. Tough, durable, corrosion-proof materials make these pumps ideal for a wide range of dirty water pumping applications. Each pump is fitted with a low-consumption electric motor with overload protection and a float switch for automatic water level control. Stylish design, improved technology and innovative materials are the main features behind the new Elpumps NEPTUN free-flow (Vortex) pumps, engineered for easy use and extreme reliability. As the Vortex system allows dirty water drainage without fear of the impeller clogging, Elpumps NEPTUN water pumps can be used for domestic and industrial applications where the water, such as groundwater, sewage water or other types of surface water, contains suspended solids of up to 30 mm. Structure: The pump motor casing and shaft are composed of INOX stainless steel, the hydraulic case is constructed of cast iron or INOX steel, and the impeller is made of high-grade, corrosion-proof NORYL PPO polymer, gray cast iron or INOX steel. The shaft is jointly sealed with a spring-loaded seal ring (gasket) and a modern slide-ring axial seal. Application: - Reliable pumping of sewage with dirt particles up to 35 mm in size - Draining of slightly dirty water from construction sites - Automatic draining of dirty water from cesspools, wells, tanks or reservoirs - Flood irrigation in greenhouses, horticulture and small-scale agriculture - Water supply for livestock farming - Emergency draining of flooded areas or rooms - Lowering groundwater - Rainwater harvesting - Emptying of pools, ponds, sumps and flooded cellars Features And Benefits: - Powerful 800W / 1200W / 1600W motor - Flow rate of up to 32,000 liters/hour - Maximum immersion depth of 5 meters - Maximum suction head of up to 12 meters - Durable, non-corrosive, rust-proof materials - Able to pass solids of up to 35 mm in diameter - Integrated float switch, auto start/stop function - Fitted with 10-meter H07 RN-F 3G 0.75/1 mm2 cable - Thermal overload protection - Light weight and compact size (8 kg) - 2-year guarantee

Submersible Cutter Pumps For Sewage Elpumps submersible cutter pumps for sewage are engineered for maximum reliability and efficiency. The Elpumps BT series is specifically designed for a range of dewatering, drainage and wastewater applications, where solids have to be cut into small particles to enable the liquid to move smoothly and minimize the clogging that may occur with regular pumps. Elpumps cutter pumps can handle waste solids of up to 30 mm and feature automatic shutdown when the water level drops, as well as thermal overload protection. For additional protection, Elpumps cutter pumps are equipped with a residual-current device that instantly breaks the electric circuit when the impeller becomes clogged to prevent serious damage to the motor. Structure: The Elpumps submersible cutter pump casing and shaft are composed of INOX stainless steel, with excellent resistance to aggressive sewage waters. The engine cover is made of corrosion-proof plastic or INOX steel, and the hydraulic case and impeller are made of cast iron. The shaft is sealed with a modern ceramic-silicon axial seal. The durable materials ensure reliable and efficient operation and the long life of the pump. Application: - Pumping of sewage with small solid particles or organic waste, where grinding is necessary - Reliable pumping of sewage with dirt particles up to 30 mm in size - Draining of slightly dirty water from construction sites - Automatic draining of dirty water from cesspools, wells, tanks or reservoirs Features And Benefits: - Powerful 900W / 1600W motor - Flow rate of up to 28,000 liters/hour - Maximum immersion depth of 5 meters - Maximum suction head of up to 18 meters - Durable, non-corrosive, rust-proof materials - Able to pass solids of up to 30 mm in diameter - Integrated float switch, auto start/stop function - Fitted with 10-meter H07 RN-F 3G 1 mm2 cable - Thermal overload protection - 2-year guarantee

Submersible Deep-Well Pumps For Clean Water The Multi Drain series incorporates Elpumps' highest hydraulic performance submersible deep-well pumps, built to deliver optimum performance during periods of high demand. Characterized by a robust build, a powerful 900W / 1200W motor, 3-5 high-performance impellers and a suction head of up to 54 m, Multi Drain pumps are perfect for all kinds of deep-well drainage tasks. The tough, durable, corrosion-proof materials offer high resistance to suspended solids. Multi Drain pumps are fitted with an integrated automatic float switch and have a low-consumption electric motor with thermal overload protection. Ideal for pumping clean water from bored wells, irrigating gardens and green areas by flooding or sprinkler and for dewatering flooded areas, pools, fountains and hobby applications in general, Elpumps Multi Drain pumps are perfect for both domestic and light commercial use. Structure: The pump motor casing and shaft are composed of INOX stainless steel, the hydraulic case is constructed of cast iron, and the impellers are made of high-grade, corrosion-proof NORYL PPO polymer. The shaft is jointly sealed with a spring-loaded seal ring (gasket) and a modern slide-ring axial seal. Application: - Automatic water pumping from bored wells, tanks or reservoirs - Delivering clean water to operate high-pressure garden irrigation systems - Irrigation in greenhouses, horticulture and small-scale agriculture - Flood irrigation for gardens - Water supply for livestock farming - Lowering groundwater - Rainwater harvesting - Emptying of pools, ponds and flooded cellars Features And Benefits: - Powerful 900W / 1200W motor - Equipped with 3 or 5 impellers - Maximum immersion depth of 20 meters - Maximum suction head of up to 54 meters - Professional IPX8 waterproof sealing - First-class electric shock protection - Durable, non-corrosive, rust-proof materials - Integrated float switch, auto start/stop function - Fitted with 20-meter H07 RN-F 3G 1 mm2 cable - Thermal overload protection - 2-year guarantee

Submersible Deep-Well Tube Pumps For Clean Water Elpumps BP series high-quality, submersible deep-well tube pumps cover a wide range of domestic and agricultural applications where efficient water pumping from great depths is required for water supply or irrigation purposes and also offer a solution to reduce water shortage problems in remote areas with special climatic or geographic conditions. The BP series is made with a high-grade INOX stainless steel casing to ensure efficient corrosion resistance and long product life in even the most demanding environments. If connected with a pressure tank, the submersible tube pumps can also operate as domestic waterworks. Structure: Elpumps submersible deep-well tube pumps consist of two main parts, the motor at the bottom and the pump unit on top. The structure allows for quick and easy repair or maintenance as the two units can be disassembled by loosening the screws without difficulty or effort. The reliable long-term operation of the pumps is guaranteed by a motor of up to 1600W, the INOX stainless steel casing with IPX8 waterproof seal, and the 1-18 bronze or high-grade, corrosion-proof NORYL PPO polymer impellers. Application: - Automatic water pumping from deep levels - Water supply in remote areas with special conditions - Delivering clean water to operate high-pressure garden irrigation systems - Creating pressure in water supply systems for small buildings - Irrigation in greenhouses, horticulture and small-scale agriculture - Flood irrigation for gardens - Water supply for livestock farming - Lowering groundwater Features And Benefits: - Powerful 1000W-1600W motor - Maximum immersion depth of 10 meters - Maximum suction head of up to 80 meters - 3" or 4" diameter - Professional IPX8 waterproof sealing - First-class electric shock protection - Durable, non-corrosive, rust-proof materials - Fitted with 20-meter H07 RN-F 4G 1 mm2 cable - Thermal overload protection - 2-year guarantee

Garden Jet Pumps For Clean Water Elpumps JPV/JPP series garden jet pumps can be used to deliver clean water at high pressure, allowing for convenient and safe irrigation with sprinklers, nozzles and a range of other domestic or gardening applications. Elpumps garden jet pumps are made of durable, corrosion-proof materials and are available with an INOX stainless steel casing, INOX steel impeller and integrated water filter, guaranteeing energy-efficient and quiet operation with high performance and improved reliability. The jet pumps may not be used with saltwater, or aggressive or easily combustible substances, or liquids for human consumption besides water. Structure: The internal structural elements within the jet pumps are composed of high-grade, corrosion-proof and cavitation-resistant NORYL PPO polymer or INOX stainless steel, and the pump casing is made of NORYL PPO polymer, cast iron or INOX steel. The shaft is sealed with a modern carbon-ceramic axial seal. Application: - Automatic pumping of clean water from wells, tanks or reservoirs - Delivering clean water to operate high-pressure garden irrigation systems - Creating pressure in water supply systems for small buildings - Irrigation in greenhouses, horticulture and small-scale agriculture - Water supply for livestock farming Features And Benefits: - Powerful 800W-2000W motor - Maximum suction head of up to 48 meters - Durable, non-corrosive, rust-proof materials - Fitted with 1.5-meter H07 RN-F 3G 1 mm2 cable - Thermal overload protection - 2-year guarantee

Domestic Waterworks The Elpumps VB/VBP series domestic waterworks offers a complete water supply system with a compact design, delivering clean water from reservoirs or wells to be used in homes or irrigation systems and much more besides. The domestic waterworks are equipped with jet pumps made of durable, corrosion-proof materials, and are available with an INOX stainless steel casing, INOX steel impeller and integrated water filter, guaranteeing energy-efficient and quiet operation with high performance and improved reliability. The robust 800W-1500W motors can deliver up to 6,300 liters of water per hour and generate a continuous water supply with constant pressure. The stainless steel pressure tanks have a capacity of 25 or 50 liters and come with an integrated gauge to read the pressure easily. The domestic waterworks may not be used with saltwater, or aggressive or easily combustible substances, or liquids for human consumption besides water. Structure: The internal structural elements in the jet pumps within the waterworks are composed of high-grade, corrosion-proof and cavitation-resistant NORYL PPO polymer or INOX stainless steel, and the pump casing is made of NORYL PPO polymer, cast iron or INOX steel. The shaft is sealed with a modern carbon-ceramic axial seal. The high-quality flexible bag in the pressure tank is made of BUTYL rubber. APPLICATION: - Automatic pumping of clean water from wells, tanks or reservoirs - Delivering clean water to operate garden irrigation systems under permanent pressure - Automatic water supply to houses and gardens requiring constant pressure FEATURES AND BENEFITS: - Powerful 800W-1500W motor - Integrated pressure gauge - 25L or 50L pressure tank capacity - Available with INOX stainless steel pressure tank - Automatic operation with integrated pressure switch - Water drain screw for easy draining of residual water - Durable, non-corrosive, rust-proof materials - Fitted with 1.5-meter H07 RN-F 3G 1 mm2 cable - Thermal overload protection - 2-year guarantee

industrial rotary lobe pumps are versatile and standalone. They are used primarily in environmental technology and the chemical industry for continuous and gentle conveyance of almost any substance while dosing in proportion to rotation speed. Their low-space requirements and high-power density are some of their most important advantages.

Equipment Name : Cooling Water Pump Origin China Specifications: Range of head: (m), Range of head: ~, m Range of quantity(m3/h), Range of quantity: ~m3/h, Working Conditions: Safety level RCC-3S, S pecification grade RCC-M3, Warranty level Q1, Seismic rating 1A, Fluid medium water with pH=8â?¼9, Introduction As appraised by the national energy organization on April14, 2013,the engineering prototype is at a leadingstandard within China in terms of efficiency, vibration, and other indicators. Orders for 8 units intended for Fuqing Nos.5 and 6 have been acquired.

Equipment Name DG Sub-high-pressure Boiler Feed Pumps Specifications Range of head: (m). Range of head: 500 ~ 1050. m Range of quantity(m3/h). Range of quantity: 12â??280m3/h. Introduction A DG Sub-high-pressure boiler feed pump is a segmental mono-casing multi-stage pump, where its inlet and outlet flanges are vertically upward, centrally supported to effectively prevent central asymmetry and vibration due to thermal expansion, its cooling water runs in a piping-main scheme system, and it provides a mechanical seal self-flushing system for user-friendly connection. It is characterized by a compact structure, attractive appearance, and reliable operation. The pump rotates clockwise when looked in the coupling direction.

KQTLR series desulfurization pumps Specifications Range of head: (m). Range of head: 500 ~ 1050. m Range of quantity(m3/h). Range of quantity: 12â??280m3/h. Introduction The desulfurization pumps of the KQTL(R) series are single-stage single-suction horizontal centrifugal pumps, researched and developed by Kaiquan Group for desulfurization purification devices used for coal-fired units in thermal power plants. They are mainly used as circulation pumps for absorption towers in wet FGD devices to convey limestone and gypsum slurry. The products draw on features of domestic and similar foreign products, they are safe and reliable to operate, easily maintained, provide efficient operation and energy conservation, have a long service life and other advantages.

Product Name High pressure safety injection pump Introduction As appraised by the national energy organization on October 10, 2010, the engineering prototype is at the domestic leading level at the aspects of efficiency, vibration, and other indicators. MOQ 1 Piece

Product Name: Containment Spray Pumps Specs: Range of head: (m). Range of head: ~. m Range of quantity(m3/h). Range of quantity: ~m3/h. Introduction: As appraised by the national energy organization on December20, 2012, the engineering prototype is at an internationally leading standardin terms of efficiency, vibration, and other indicators. Origin : China

Product Name Residual Heat Removal Pumps Introduction: An normal residual heat removal pump - one of the main devices in a normal residual heat removal system (RNS) in an auxiliary plant of an AP1000 nuclear power plant, has the following main features: It extracts the heat generated at shutdown of a reactor coolant system. After the start-up of an automatic pressure system (ADS), it provides low pressure replenishment water from the feeding tank of a spent fuel pool cooling system (SFS) to RCS. When needed it discharges the residual heat from refuelling water tank built in the containment. After an accident it provides a long-term refuelling channel to RCS Other features: shutdown purification, low temperature overpressure protection, spent fuel pool cooling. Origin China MOQ 1 NOS

Product Name Centrifugal submersible sewage pump Specifications Range of head: (m) Range of head: m Range of quantity(m3/h) Range of quantity: m3/h Introduction A unique single- or double-channel impeller structure is adopted to greatly improve dirt carrying capacity and let go fibrous material equivalent to pump bore, and solid particles with a diameter about 50%of pump bore; the series is characterized by overall compact structure, small size, low noise, remarkable energy-saving effect, easy maintenance, greatly reduced project costs (since it can work in a submerged manner without pumping stations), quick installation; and resolved noise and heat problems.