We are offering school management software.
Plan, track and communicate students' growth every step of the way stress free school management
I-manage school management system is a cloud based management and collaboration system for schools to help parents, students & school staff stay connected with the school anytime, anywhere.
Dialers is a contrivance that is linked to a telephone line to screen the dialed numbers and modify them to effortlessly provide services that otherwise require extensive access codes to be dialed. A dialer automatically inserts and adapts the numbers depending on the pre-programmed data, allowing the user to subscribe to the service providers at his wish and feasibility.
Gaytes dialer solutions are integrated with switching systems ( epabx or server & acd ) to monitor agentÆs status and its activities. Optimize agent utilization and thus enhance call center productivity.
Gaytes dialer solutions :
ò auto dialer - phone system delivers a pre-recorded message to live answers and answering machines. If another call status is detected (busy, etc.), our phone systems can reschedule the call for a later time. Simple messages can be delivered or the call recipient can be presented with an ivr script that accepts touch phone responses.
The remaining auto dialer techniques are used in conjunction with call center phone agents. These agents are either local to the contact center or can be working from home or in remote locations.
ò preview dialer - phone agents view call information prior to the call being placed. The agent can decide not to initiate the call.
ò progressive dialer - this dialing method passes the call information to the agent at the same time the number is being dialed by the phone dialer. The agent usually has a few seconds to view the call information, but cannot stop the call process.
ò predictive dialer - this technique is more sophisticated because the phone dialer automatically calls several numbers and only passes a call to your agent when a person has been contacted by human voice detection technique. This eliminates busy signals, answering machines, etc.
We are engaged in manufacturing wide range of self supported chimneys as per clients requirements. We have manufactured chimneys up till 140mtrs and erected. The same are self supported with platforms at various levels, samplling points, lightning arrestor and aviation lamp and other safety features.
Shipping International shipping
Panyment Type T/T
Minimum Order Quantity 1 NO
Packaging & Shipping
AS PER CLIENTS REQUIREMENTS
Our ServicesCustomer ServicesCompany Information
We Design and manufacture wide range of CHIMNEYS for steam boilers or Cement plants for ash recovery from 1 ton/hr to 100 ton/hr capacity and above. TheCHIMNEY comes with fully automated control system with fully automated control panel for controling.
ALUMINA MORTAR (Test Certificate)
General Properties
A. Max service temperature - 1500 oC
B. Maximum grain size - 0 - 1.5 mm
C. Water required for mixing - 22 - 30%
D. Setting - Airsetting
E. Sintering Temp - 1550 oC
Chemical Properties
A. Al2O3 - 50.00%
B. SiO2 - 31.00%
c. Fe2O3 - 5.00%
D. LOI - 7.00%
Physical Properties
A. Dry Density - kg / m3
B. CCS - 17 kg / cm2 after drying at 110C / 24 hr
C. MOR - 20 kg / cm2 at 110 oC/ 24 hr
18 kg/cm2 at 800 C/ 3 hr
Thermal Properties -
A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC
Packaging - 25 - 50 kg bags
Storage Life - 12 months
Delivery State - Dry
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
EduERP is an Institute Management Software that helps in smooth and effortless functioning of institutions and school to eliminate complicated operations and run an efficient management.
From general administration to academic activities this software covers all facets of educational and training institutions like
• Automate Admissions and Registration
• Efficient Management of Student Information
• Student and Staff attendance
• Class and Subject Management
• Time table generation
• Analyze performance of class and grade
• Automated Examination system
• Innumerable MIS report generation
• Hostel and Lodging management
• Salary and Accounts Management
• General administration and activities.
Accupay, is a tool which relieves from complex HR processes and eases the task of managing HR. Feature-rich and easy to use, Accupay streamlines the entire HR processes regardless of industry or size. Accupay helps narrowing down on HR processes by acting as a personnel file at your finger tip with all employee related information and activities accessible 24/7.
Key Features:
• Includes all functions of HR like recruitment, payroll, attendance monitoring, management of incentives, compliance, shifts, quality of work life, leave management etc.
• Unlimited number of companies, employees and salary structure description.
• Compliant with PF, PT, ESI, LWF, TDS and other compliances.
• Defines salary heads as formula, slabs, lump-sum, company lump-sum every month.
• Secured data access and rights with configurable user rights and permission.
• Classification of companies across locations, departments and organization levels.
• Unlimited set ups for deduction types gross or net, flexibility on tax deduction by percentage, fixed amount, hours worked etc.
• Employee Self Service (ESS) integration allows employees themselves to view or modify their records.
spotCRM is a CRM Software that helps you achieve your goals by making available a very powerful CRM solution specially built for SME organizations. This Web based CRM solution provides online access to all the sales and marketing information to your sales staff from anywhere and at any time.
Modules:
• Marketing Automation
• Sales force Automation
• Services and Support
• Productivity/Tools
• Inventory and Accounts Management.
EliteERP is ERP software which offers solution for entire business processes with cutting edge technology to answer any small and mid-sized business needs. It is completely easy-to-use software which includes modules like Financial Accounting, Sales and Distribution, Procurement, Inventory Management and Manufacturing.
Key Features:
• Windows based, fully integrated software
• Fully Customizable
• Supports multiple currency and location
• Remote access to be in touch with business from anywhere around the world
• Fully compliant with Excise, Service Tax, VAT and TDS
• In depth reports of all functions
• Batch and Serial number handling
• Can manage multiple products attribute.
AccuERP is a full range ERP Software covering all functions of organization in a highly cost effective manner. It encompasses various functions like Procurement, Resource Management, Quality Maintenance, Financial Control, Production Planning, Project Management, HR and Payroll Functions, etc thereby decreasing the idle time and fix operations in a way to smoothen the line of work and coordinating activities to maintain sync between processes.
Features:
Key Features:
• Support multiple currencies and languages
• Can hold multiple companies and places globally
• Web based solution
• Highly customizable according to requirements
• Exports Reports in various format like PDF, Excel, Word, HTML, Text and Email
• VAT, TDS, Service Tax, Excise and statutory Compliance
• Remote access.
Modules:
• Financial Accounting
• Procurement
• Inventory Management
• Production
• Sales & Distribution
• Maintenance
• Quality Control
• HR & Payroll
• System Management.
Call center solution the z .Ccs (call center solutions) system is easy to customize, administer and use. The z.Ccs system can be integrated within the existing communications infrastructure. The product is developed on the defacto industry standard voice processing hardware. The product allows seamless lan connectivity options. Also supported is full open database connectivity (odbc) support for immediate and future cti developments and the product is so developed that it supports pbx and pstn integration.
