Commodity/Product: Electrolytic Copper Cathode Plates
Fineness: 99.99% Cu; but not lower than 99.97% (inferior quality to be rejected)
Quality: Non LME registered but in compliance with LME Grade A specifications
Origin: Democratic Republic of Congo
LME: London Metals Exchange (www.lme.com)
Physical Dimensions
Length 914 mm (LME standards)
Width 914 mm (LME standards)
Thickness 12 mm (LME standards)
Net weight per sheet 125 Kg (Approx.) (+-2%)
Net weight per pallet 2 Mtons (Approx.) (+-2%)
Net weight per container 20 Mtons (Approx.) (+-2%)
Gross weight per container 22,2 Mtons (Approx.) (+-2%)
Packing palletized banded by aluminum bands
Chemical Composition
Elements Value
Copper Cu 99.97% Min.
Cobalt Co 0.2 ppm Max.
Lead Pb 0.2 ppm Max.
Iron Fe 2 ppm Max.
Aluminum Al 0.5 ppm Max.
Manganese Mn 0.1 ppm Max.
Nickel Ni 0.2 ppm Max.
Antimony Sb 0.1 ppm Max.
Arsenic AS 0.1 ppm Max.
Silica Si 0.3 ppm Max.
Bismuth Bi 0.1 ppm Max.
Teleurium Te 0.05 ppm Max.
Silver Ag 10 ppm Max.
Selenium Se 0.3 ppm Max.
Sulphur S 4 ppm Max.
Magnesium Mg 0.4 ppm Max.
Argent Ag 10 ppm Max.
Zinc Zn 0.4 ppm Max.
Oxygen O2 0
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Aluminum Alloy dragon cable.It is made of alloy shell,cooper core and dragon woven.It has charge 2 in 1,bold conductor,high strength wire rope,and durable non knot functions. Suitable for
Flat design,not easy to knot,internal use of high purity oxygen free copper wire, strong conductivity,nickel plate connector,resistance to plug and play,two port uniqne non slip setting,more fit finger,and easier to plug speed charging
