And mobility-ergonomic well balanced design with wheels and handle for all-terrain; - "super cool" fan and efficient condenser design provides fast speed in recovery, recharge and can handle high ambient temperatures; - multi-function valve design and multi-refrigerant capable with self-clearing feature, which prevents cross-contamination; - large filter outlay design, which is convenient for replacing; - optional float cable provides automatic shut off when tanks are 80% full; - cm exceptional compressor, condensing & cooling systems allow fast recovery in high temperature environments; - r410a ready with 550 psi high pressure shut-off switch; - 0 to 55 bar (800-psig) discharge gauge to handle r-410a; - " self-clearing" valve.No need to turn off the unit when switching from the recovery to self-clearing; - pressure gauge measured in psi & bar; - on board suction and discharge gauges. Product specification/models Model: cm3000a refrigerant recovery machine Oil-free compressor: 1hp dual-cylinder compressor compressor Pull/push recovery rate:
H intensity and concussion resistance. - overall protection device, safe credibility - meet ari700 standards - 2 years warranty - weighs only 16.8kg Product feature - refrigerant recovery machine with portability and mobility-ergonomic well balanced design with wheels and handle for all-terrain; - "super cool" fan and efficient condenser design provides fast speed in recovery, recharge and can handle high ambient temperatures; - multi-function valve design and multi-refrigerant capable with self-clearing feature, which prevents cross-contamination; - large filter outlay design, which is convenient for replacing; - optional float cable provides automatic shut off when tanks are 80% full; - cm exceptional compressor, condensing & cooling systems allow fast recovery in high temperature environments; - r410a ready with 550 psi high pressure shut-off switch; - 0 to 55 bar (800-psig) discharge gauge to handle r-410a; - " self-clearing" valve.No need to turn off the unit when switching from the recovery to self-clearing; - pressure gauge measured in psi & bar; - on board suction and discharge gauges. Product specification/models Model: cm2000a refrigerant recovery machine Oil-free compressor: 3/4hp oil-free & high efficiency compressor Pull/push recovery rate:
Technical data 1.Suitable valve : 2/3 line valve 2.Power supply : 220v ¡¾10% 50/60hz 3.Setpoint range/setting unit : 10¡æc--30¡æc 4.Function : cooling /heating 5.Fan speed choice : three speed , 3a/220v 0.3kg
1.Specifications / structure 1). Material: made of stainless steel by stretching forming, attractive appearance, no rust, 2). Bearing: wholel sealing bearing, which can ensure it operates smoothly and constantly. 3). Special central shaft design, high-class lubricating bearing system: preventing turbine blades Rotating at high speed from deformation, and extending the service life. 4). Inside support frame: cast iron. 2.Advantages 1). Automatically running. Wind drive. One time investment, no anymore cost. 2). No operating cost, no electricity consumption, environmental protection, energy-saving. 7. Why should you consider a no power roof turbine ventilators? The ventilator is very quiet and the rotating action provides employees with visual knowledge that the unit is operating.
The fire control used in the industry, civil building and people¡¡¥s air defense project mainly arranges cigarettes, can be used and ventilated and taken a breath in the room at ordinary times. The electrical machinery adopts the high temperature type, and cool the wind circulatory system, can run for a long time under 100 degrees centigrade of medium gas , can send exhaust gas of 280 degrees centigrade and up to 40 more than of kind steadily . Three kinds of types, such as horizontal, roof type, cupboard type, etc. Are suitable for selecting for use. Arrange cigarette ventilate two time spent, can select pairs of speed electrical machinery for use , ventilate and take a breath at a low speed, arrange cigarettes at a high speed.
Mfg:- in 18" 21" 24" Al, ss, &gi 3kg max to6kg aprox weight
Principle The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc.
We're the leading manufacturer of Evaprotive Air Cooler in East China. The product will cool,ventilate, and change the air. Single unit can cool the area up to 130-150 square meters and 5-10 degrees will be reduced, but the comsumption of electric is 1.1kw. We supply 3 phase 380V fixed & variable speed motor and Single phase 220v variable frequency speed motor which is the newest. The product is suitable for the manufacturing place, waiting area, exhibition hall, studio space, internet service, foodcourt, kitchen , laundry, livestock breeding an so on. It can be mounted through window or wall. The direct drive with eletric oscillating louver enlarges the cooling area. Many rooms in one building can share the cool by using the duct like as a central air condtioning. The protrudent characteristics of our product are energy-saving,economy,pro-environment and safety. I believe it has the huge market potential in your country and also you can radiate to the perimeter zones. If possible,we will set up the assemble factory in the future.If you are intrested and want more, you are welcome to visit our website www.windking.net . We are seeking a company who is reliable and capable for our agence in your country as our products are quite different from the disposable goods such as garments,shoes because besides the high quality, competitive price, we should supply the good after sales service. It's quite necessary that the partner we are expecting should own an engineering team which has experience and the sales network. We are expecting the cooperation with you.
Main Features: 1.Combinations of cooling,ventilation,air-exchange,anti-dust,and savor-removal. 2.Environment: CFC Free, Nonpollution. 3.Automatic performance with LCD:Electronic control ,cleaning and water supplying antomaticly. 4.Energy-saving:lower daily cost Cabout one kilowatt per hour.Uses 80% less energr-much more economical than comparable traditional air conditioner C giving you tremendous savings. 5.Effectively and efficiently for cooling:5-12oC can be dropped in damp areas while 8-15 oC reduced in hot and dry conditions. 6.Great capacity of ventilation: Produces over 18000m3 of cooling power hour.Can cool areas up to 150m2 and can blow airflow as far as 30 merters away. 7.Option: Single phase various speed or three phase fixed and various speed. 8.Small investment but big effects:One workshop owning 100 sewing machines only needs about 6 units which costs 60% of the investment for traditional compressor air conditioners.All the investmens will be regained within 12 months. Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc.
Principle The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc. Parameter Specifications: Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 220/50 Rated Electric Current(A) 2.8/4.8 Fan Type: Axle Discharge Type : Down discharge Controller Type : Intelligent LCD Motor Type: Single-phase Various Frequency Speed Capability Characteristic Injection shell is using modified PP composite materials and aluminum alloy column precision tectonic process; with the easy pull-out filters, wet screens paper of the frame protection and shockproof design, frame bearing capacity of 100 kg and above,with anti-corrosion, anti - ultraviolet, anti-aging15 years, high and low temperature resistance (subzero 20 C - 50 C) without distortion, and fuselage life for more than 10 years. LCD panel control system, using single-phase various frequency speed, three-phase various speed, three-phase fixed speed intelligent electronic control systems and closed all high-quality match for the electrical, intelligent sewage cleaned regularly, wrong phase, short phase, overload current, water shortages protection and fault alarm function. Adopt Sweden 5090-patented technology evaporative wet paper filter net , and the evaporative area in more than 85%; Using 3 leaves impeller, using silencers acoustic and noise reduction technology, the noise can be controlled lower than 56 dB
Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 220/50 Rated Electric Current(A) 2.8/4.8 Fan Type: Axle Principle·ª The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc.
Principle The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Parameter Specifications: Airflow(m3/h):18000 Power(Kw) :1.1 Fan Type:Axle Discharge Type :up Controller Type :Intelligent LCD Motor Type:Three-phase Fixed Speed Voltage/Frequency(V/Hz) :380/50 Unit Size(mm):1080?1080?980 Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc.
Basic principle: The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Parameter specification: Airflow(m3/h):18000 Power(Kw) :1.1 Fan Type:Axle Unit Size(mm):1080?1080?980 Discharge Type :up Controller Type :Intelligent LCD Voltage/Frequency(V/Hz):220/50 Motor Type:Single-phase Various FrequencySpeed Applicable scope Manufacturing industries such as clothing , textile , the machinery , pottery , chemical industry , metallurgy , glass , five metals , leather ,etc.; Processing industry such as electroplating , electron , shoes-making , printing and dyeing , plastics , printing , packaged food; Stadium , school , waiting room , super market , laundry , kitchen , food market , underground parking , greenhouse, poultry , flowers , animal husbandry ,etc.
1.Automatic performance with LCD:Electronic control ,cleaning and water supplying antomaticly. 2.Energy-saving:lower daily cost ¿Cabout one kilowatt per hour.Uses 80% less energr-much more economical than comparable traditional air conditioner ¿C giving you tremendous savings. 3.Effectively and efficiently for cooling:5-12oC can be dropped in damp areas while 8-15 oC reduced in hot and dry conditions. 4.Great capacity of ventilation: Produces over 18000m3 of cooling power hour.Can cool areas up to 150m2 and can blow airflow as far as 30 merters away. 5.Environment: CFC Free, Nonpollution. 6.Option: Single phase various speed or three phase fixed and various speed. 7.Combinations of cooling,ventilation,air-exchange,anti-dust,and savor-removal. 8.Small investment but big effects:One workshop owning 100 sewing machines only needs about 6 units which costs 60% of the investment for traditional compressor air conditioners.All the investmens will be regained within 12 months.
Principleú¦ The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Parameter Specifications: Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 380/50 Rated Electric Current(A)ú¦2.8/4.5 Fan Type: Axle Discharge Type : Down discharge Controller Type : Intelligent LCD
Parameter Specifications: Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 380/50 Rated Electric Current(A) 2.8/4.5 Fan Type: Axle Discharge Type : Down discharge Controller Type : Intelligent LCD Motor Type: Three-phase Fixed Speed
Parameter Specifications: Airflow(m3/h):18000 Power(Kw) :1.1 Fan Type:Axle Discharge Type :up Controller Type :Intelligent LCD Motor Type:Single-phase Various Frequency Speed Voltage/Frequency(V/Hz) :380/50 Unit Size(mm):1080?1080?980 capability characteristic: Injection shell is using modified PP composite materials and aluminum alloy column precision tectonic process; with the easy pull-out filters, wet screens paper of the frame protection and shockproof design, frame bearing capacity of 100 kg and above,with anti-corrosion, anti - ultraviolet, anti-aging15 years, high and low temperature resistance (subzero 20 fp C - 50 fp C) without distortion, and fuselage life for more than 10 years. LCD panel control system, using single-phase various frequency speed, three-phase various speed, three-phase fixed speed intelligent electronic control systems and closed all high-quality match for the electrical, intelligent sewage cleaned regularly, wrong phase, short phase, overload current, water shortages protection and fault alarm function. Adopt Sweden 5090-patented technology evaporative wet paper filter net , and the evaporative area in more than 85%; Using 3 leaves impeller, using silencers acoustic and noise reduction technology, the noise can be controlled lower than 56 dB
Airflow(m3/h): 18000 Power(Kw) : 1.1 Voltage/Frequency(V/Hz) : 220/50 Rated Electric Current(A) 2.8/4.8 Fan Type: Axle Discharge Type : up discharge Controller Type : Intelligent LCD Motor Type: Single-phase Various Frequency Speed Unit Size(mm):1080í-1080í-980
The principle of temperature drop: Water will absorb the heat from the hot air when steaming naturally. Its working principle: Extract wind through air blower, and the blower produces press, the air crosses the wet curtain, at the same time the water pump delivers water to the cloth water pipe on the wet curtain, and moisten the face of the whole wet curtain evenly, and the special angle of the wet curtain makes the water flow into one side where the air enters the wind directly, absorb a large amount of heat to lower the temperature through wet curtain, and filter it, which can make the wind nice, cool, moist and fresh. The water without evaporation falls back to the chassis forming waterway circulation. There are water level inductors on the chassis, when the water level lands to the fixed water level, it automatically open inlet valve to supply the source of water till the height of the booking water level, then close the inlet valve automatically. Parameter specification: Airflow(m3/h):18000 Power(Kw) :1.1 Voltage/Frequency(V/Hz) :380/50 Fan Type:Axle Motor Type:Three-phase Fixed Speed Controller Type :Intelligent LCD Capability characteristic: Injection shell is using modified PP composite materials and aluminum alloy column precision tectonic process; with the easy pull-out filters, wet screens paper of the frame protection and shockproof design, frame bearing capacity of 100 kg and above,with anti-corrosion, anti - ultraviolet, anti-aging15 years, high and low temperature resistance (subzero 20 fp C - 50 fp C) without distortion, and fuselage life for more than 10 years. LCD panel control system, using single-phase various frequency speed, three-phase various speed, three-phase fixed speed intelligent electronic control systems and closed all high-quality match for the electrical, intelligent sewage cleaned regularly, wrong phase, short phase, overload current, water shortages protection and fault alarm function. Adopt Sweden 5090-patented technology evaporative wet paper filter net , and the evaporative area in more than 85%; Using 3 leaves impeller, using silencers acoustic and noise reduction technology, the noise can be controlled lower than 56 dB.
Tzjw-d-101b, tzjw-s-301b, tzjw-d-101a, tzjw-s-301a Carton box
