Vacuum pump and compression systems, instrumentation air compression systems, and loading arms, engineered to order liquid and gas handling systems for a variety of industries, specifically designed to meet customers' unique process requirements.
When it comes to vacuum and compressor technology, each industry and every application has its own specific needs and requirements. NASH offers unparalleled expertise designing and manufacturing efficient and reliable engineered systems to meet your specific process needs. Each engineered system comes packaged and ready for operation, easily integrating with existing processes and automation systems; minimizing installation and operating costs. Regardless of the application, our broad portfolio of products and technologies ensures that Nash has a solution for you. Whether itâ??s a standard pre-engineered package for general industry, an application specific package for the power industry, or a complete engineered to order hybrid system for the chemical industry; NASH has the experience and expertise to deliver an engineered system that is designed to meet the rigors of even the most demanding applications. Nash liquid ring vacuum pumps and compressors offer the widest performance range on the market. Depending on the size and model, our liquidring vacuum pumps are capable of providing a suction capacity between 10 m�³/hr to 39,000 m�³/hr, with vacuum levels down to 28 mbar abs. Certain models can also be equipped with a center shroud, allowing the liquidring vacuumpump to operate at multiple suction pressures. Our liquid ring compressors are capable of achieving a capacity between 50 and 16.000 m�³/h and discharge pressures from 2 bar abs up to 15 bar abs. In certain applications it is also possible to use the same model for both vacuum and compression. Nash liquid ring pumps are capable of handling a wide variety of gases; from gasoline vapors, sulfur dioxide, and chlorine to hydrogen sulfide and vinyl chloride monomers. Seal liquids can be chosen based on process requirements and the gas being handled. In addition to water, a range of seal liquids including acetic acid, acetone, glycol, xylene, and more can be used.
For sale are four Hayfu devices of the model JC Focused Ultrasound Tumour Therapeutic System for the detection and treatment of tumours via ultrasound. Unused, original packaging and sealed. The units can be purchased with service and warranty period as required. All four units together would be sold from 10,177,200.00 USD depending on additional wishes of warranty and service. Purchase of less than four units would also be possible by arrangement. For more detailed information, please contact us.
Divina ultra bodyforming device including eqipment
New device with equioment
Color spectral measurement system konica minolta spektro photometer cm-3600d
Used ultrasound siemens sonoline sl-1. 4 units available
Used ultrasound siemens sonoline si-250 with different probes. 4 units available
Used defibrillator zoll medical m series. 8 units available
Varioclav 25 tc steri steam sterilizer 11 units available
Used defibrillator zoll medical m series. 8 units available
Ingersoll Rand offers a full range of compressor and dryer packages designed specifically to provide clean, dry compressed air for process and instrument air applications. Instrument and Service Air (IA & SA) equipment is used in a wide range of industries, from power generation and oil and gas, to chemical and manufacturing. Instrument and service air systems generally consist of compressors, dryers, filters, receivers, coolers, and control systems. These work together to provide stable and reliable air to a variety of plant consumers; some of which play a critical role in maintaining plant operation and safety. As a result, any equipment or systems need to be properly designed, and capable of producing the right quantity of quality air as required by users. Ingersoll Rand can design instrument air packages with various compressor modifications to provide an optimum solution for your project: Engineered-to-order solutions that can be supplied as per customer requirements. Deliver the total package, including the PLC based controller. Fully integrated with dryers, filters and piping, etc. in various custom installation types, including the container, skid, and supply of system components. Reliability: we use high-quality components to ensure maximum performance over time according to customer requirements. Provide the optimum solution, utilizing the best compressor working principles. For use in safe areas as well as hazardous areas. Deliver Simple â??Plug & Playâ?? Installation. All of our instrument air packages can be engineered to meet global and local quality certificates issued by various institutions worldwide, including API 618, API 619, API 672, ATEX, IECEx, and others. Ingersoll Rand can design the instrument air packages with different compressor modifications to meet the optimum solution for your project.
Duct-Baling-Press TypeBP 4000 V / 19,5 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 400 kN. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by photoelectric barrier. Technical Data: Drive:..................................19,5 kW/400 V/50 Hz Pressure:...............................400 kN/m¦ Volume/stroke:.....................1,0 m¦ Cycle time:............................28 sec Feed opening:......................1350x820 mm Bale dimensions:..................800 x 900 x 600 ..............................................1.200 mm No of tightening wires:..........4 Press length:.........................5750 mm Press width:..........................2050 mm Press height with funnel:......1925 mm press height complete:.........2360 mm Weight:..................................6100 kg
FAKT BP 5000 This press is excellent qualified for low-cost disposal of various kinds of waste material. The press can work under continuous feeding and will work very profitable. The press operates with a fully automatic system of bale binding device and a three-sided duct cross sectional adjustment device. Depending on the high compression, bales of pulp, paper, compounds, blister packs and foils can reach a bale package density up to 600 kg. Extremely rugged construction with high reliability. The feeding will be handled in accordance to the local requirements. The control will be fully automatic by a photoelectric barrier. Technical Data: Drive:...................................35 kW/400 V/50 Hz Pressure:..............................600 kN/m¦ Volume/stroke:....................1,3 m¦ Cycle time:...........................19 sec Feed opening:......................1350 x 1160 mm Bale dimensions:.................1100x750x600 .............................................1.200 mm No of tightening wires:..........4 Press length:.........................6850 mm Press width:..........................2650 mm Press height with funnel:.....2150 mm press height complete:........3700 mm Weight:..................................14600 kg Basic equipment - Touchpanel - photocell control - bale longimetry - fully automatic three-sided duct cross sectional adjustment device - free pitching device - fully automatic binding - 4 pieces wire coil stands large - 4 pieces wire bags for 40 kgs spools - electric control ready to plug in (SPS Siemens) engineering und documentation space assignment plan plans of electric control operation manual security instructions
SBP 200 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................200 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:.....................1200x700 mm Bale dimensions:................1200x700x500 ..........................................up to 800 mm weight of bale:.....................50 up to 200 kg press length:.......................1990 mm press width:........................1360 mm press depth:........................1170 mm weight.................................1300 kg electric control ready to plug in
SBP 100 This cabinet bale press has a large filling volume with easy filling due to a large filling opening. Knuckle-joint press pistons with thrust-twist motion for pressing operation. Simple operation due to two-hand-handling absolutely safe. Hoop band positioned visibly and easy to change. This system has a bale ejection aid. This press enables a trouble free operation due to the compact and strong construction. Technical data: Pressure:............................100 kN/m2 - abt. 20 t Drive:..................................4,0 kW/400 V/50 Hz Cycle time:..........................40 sec. Feed opening:......................600x600 mm Bale dimensions:.................500x700x500.- 900 mm weight of bale:.....................50 up to 80 kg press length:.......................1120 mm press width:.........................830 mm press height:.......................2000 mm weight.................................980 kg electric control ready to plug in
Wholesale export garlic cheap red and white garlic to all over the world Also available is, White garlic, normal white garlic and garlic powder. Garlic type: full Color: good brightness, no magazine Skin: smooth, neat lines Garlic granules: full of meat Products name: fresh garlic/Normal white garlic / Pure white garlic Size: 4.5-5.0cm,5.0-5.5cm,5.5-6.0cm,6.0-6.5cm Varitey: Normal white garlic / Red garlic / Purple garlic/Pure white garlic / Snow white garlic / Super white garlic Package: Carton, Mesh bag, Bulk, according to customer requirements Supply time (all the year round) Fresh garlic Cold storing fresh garlic Save time: 9 months under proper conditions MOQ: 1TONS Transporting temperature: -3â?? - 0â?? Certification: Invoice, Packing, Phytosanitary Delivery time: Within 7 days after receiving the down payment Why I want to buy Importance of garlic is enormous for both human health and cookery. Garlic is a crop whose production does not endanger the agro-system and the eco-system, which is of special significance for organic food production. The Health Benefits of Eating Garlic (Lahsun) are: Wards Off Cough and Cold. Raw garlic has the potential to ward off cough and cold infections. ... Good for Cardiac Health Improves Brain Functioning Improves Digestion Balances Blood Sugar Boosts Immunity Improves Skin Health Prevents Cancer and Peptic Ulcer.
High quality Cosmetic Raw Materials aristoflex avc powder Cosmetic Raw Materials Aristoflex AVC is used as a gelling agent for transparent systems and a thickening agent for oil-in-water emulsions. Addition amount: recommended 0.5ï½?1.2% Vitamin C derivatives Product name Solubility Appearance vitamin C water soblue white powder SAP(Sodium Ascorbyl Phosphate) water soblue white powder MAP(Magnesium ascorbyl phosphate) water soblue white powder Tetrahexydecyl ascorbic acid /oil-soluble vitamin c /VC-Ip/CAS:183476-82-6 oil soblue liquid 3-O-Ethyl-L-ascorbic acid CAS:86404-04-8 water/oil soblue white powder Ascorbic Acid 2 Glucoside powder (AA2G) water/oil soblue white powder Application Cosmetic Raw Materials Aristoflex AVC 1kg = 26*15*18cm 3kg = 30*20*17cm 10kg = 43*27*21cm
Ultrasound tumour therapeutic system.
Waste presses and conveyor systems.