Ffp2 mask em149 made in germany,
ffp3 mask en149 made in germany
mouth nose mask made in germany,
disinfection cabinet, made in turkey
disinfection station with sensor and accu, made in poland.
Features:
- Protection class FFP2 (protection against harmful substances such as solid and liquid dusts, smoke and aerosols)
- Tested and CE-certified according to the standard EN 149:2001 + A1:2009; Regulation (EU) 2016/425 for personal protective equipment
- Efficient 4-layer filter system (Spunbond, Meltbond, Nonwoven - high efficiency filtering of 95% of all particles in the air)
- Hygienic
- individual packaging prevents contamination of the mask before use
Mask for single use only
- 1 mask, single foiled in a PE-bag
Artikeleigenschaften:
- Schutzklasse FFP2 (Schutz vor gesundheitsschaedlichen Stoffen wie festen und fluessigen Staeuben, Rauch und Aerosolen)
- Geprueft und CE-zertifiziert gemaess der Norm EN 149:2001 + A1:2009; Verordnung (EU) 2016/425 fuer persoenliche Schutzausruestung
- Effizientes 4-Schicht-Filtersystem (Spunbond, Meltbond, Nonwoven, Hochgradige Filterung von 95% aller Partikel in der Luft)
- Hygienische Einzelverpackung verhindert die Verunreinigung der Maske vor dem Gebrauch
Maske zum einmaligen Gebrauch
- 1 Maske, jede einzelne in einem PE-Beutel verpackt
- Hygieneartikel
- vom Umtausch ausgeschlossen
Lieferumfang:
1 FFP2-Maske, 1 Masken-Spanner
21 Cocktail Station Suppliers
Short on time? Let Cocktail Station sellers contact you.
Features:
- Protection class FFP3 (protection against harmful substances such as solid and liquid dusts, smoke and aerosols)
- Tested and CE-certified according to the standard EN 149:2001 + A1:2009; Regulation (EU) 2016/425 for personal protective equipment
- Efficient 5-layer filter system (Hot Sealed Cotton, Spunbond, Meltbond, Nonwoven - high efficiency filtering of 99% of all particles in the air)
- Hygienic
- individual packaging prevents contamination of the mask before use
Mask for single use only
- 1 mask, single foiled in a PE-bag
Artikeleigenschaften:
- Schutzklasse FFP3 (Schutz vor gesundheitsschaedlichen Stoffen wie festen und fluessigen Staeuben, Rauch und Aerosolen)
- Geprueft und CE-zertifiziert gemaess der Norm EN 149:2001 + A1:2009; Verordnung (EU) 2016/425 fuer persoenliche Schutzausruestung
- Effizientes 5-Schicht-Filtersystem (Hot Sealed Cotton, Spunbond, Meltbond, Nonwoven, Hochgradige Filterung von 99% aller Partikel in der Luft)
- Hygienische Einzelverpackung verhindert die Verunreinigung der Maske vor dem Gebrauch
Maske zum einmaligen Gebrauch
- 1 Maske, jede einzelne in einem PE-Beutel verpackt
- Hygieneartikel
- vom Umtausch ausgeschlossen
The zeolites are a popular group of minerals known as hydrous aluminum silicate. More than forty naturally occurring zeolites were reported by different research groups and more than 150 zeolites have been synthesized.
They have been increasingly used in various application areas such as:
- industry
- agriculture
- waterenvironmental and -protection.
How Zeolite Works:
Clinoptilolite Zeolite has two methods of capturing nutrients or pollutants:
- Absorption into the porous matrix
- Adsorption by cation exchange (CEC)
ZeoAgrar:
We have mining rights and get our raw Material from different Places in Europe with different application possibilities.
Turkey and Slovakia -
Greece - water treatment
Bulgaria - health care
Standard Products:
- Zeoagar 20m from 3,08$¬/KG
- Zeoagrar 0,1-0,7mm from 2,11$/KG
- Zeoagrar 1,5-3,5mm from 1,87$/KG
-Disposable Polyethylene Work Gloves for
Cooking and Food Handling
Cleaning
Hairdressers
Bakery and confectionery
Laboratories, health centers, and hospitals
Gas stations
-Disposable Polyethylene Work Gloves for
Cooking and Food Handling
Cleaning
Hairdressers
Bakery and confectionery
Laboratories, health centers, and hospitals
Gas stations
Stainless steel, AISI304
Batch sizes from 10 to 1000 liters
Air free production
Direct steam injection
Double jacket insulation
Automatic dosing(Water/Oil/Venigar)
CIP Station (Cleaning-In-Place)
Computer controlled, up to 50 recipes
Weight: 260 to 2800 kg
Dimensions: 1 x 0.6 x 1.3m to 2.2. x 1.5 x 3.2m
Supplier From
Rheine,
Nordrhein-Westfalen,
Germany
Tin press DP 30, 7,5 kW
The special characteristics of this tin press is the small requirement of space and the compact construction.
This tin press can be used manifold, e.g. super-markets, cookeries, hospitals, old-age asylums, petrol-stations, derricks, liners, camping sites.
This tin press is able to press drinking cans, PE-plastic bottles or other iron or non-iron metals of small or medium dimensions. The small bales without any tightening straps are pressed into very compact packets with a bale density up to 450 kg/m3 and can be supplied to the recycling plants without any further processing. The small compressed bales can be handled simply and can be stacked very good. The solid steel construction as well as the high quality of the hydraulic and elekctric control unit give this press the seal of quality.
Technical data:
Cycle time:...................42 sec.
Volume, stroke:............90 ltr.
Compression ratio:........abt. 1 : 16
Pressure:.....................420 kN
Drive:...........................7,5 kW/400 V/50 Hz
Feed opening:..............400 mmx350 mm
Bale dimensions:..........290x390x50 mm
Press width:.................700 mm
press height:................2.300 mm
Dead weight:................1.650 kg
Bale density:................abt. 450 kg/m3 in case of iron tins (FE)
including electric control wires - ready for plug in
GeneralProduct type Flash player
PC interface(s) supported USB
Width 1.6 in
Depth 0.3 in
Digital storage None
Height 3.5 in
Weight 1.5 oz
Color Black
Available body colors Black
Included accessories Earbud headphones, USB cable, Dock adapter
Software type Apple iTunes for Mac, Apple iTunes for Windows
ConnectivityCable(s) included 1 x USB cable - External
Connector type 1 x Docking station Mini-phone stereo 3.5 mm, 1 x Headphones
BatteryBattery required qty 1
Rechargeable battery Rechargeable
Battery Enclosure Type Integrated
Battery technology Lithium ion
Recharge time 3 hour(s)
Carrying CaseCase type None
Manufacturer warrantyService & support type 1 year warranty
Digital Player / RecorderDigital player supported digital audio standards AAC, MP3, WAV, AIFF, Audible, Apple Lossless
Digital player playback modes Repeat all, Random play, One track repeat
Digital player edit functions Erase
Digital player response bandwidth 20 - 20000 Hz
Digital player supported bit rate 16 - 320
Digital player ID3 tags support Yes
Digital player additional features Variable bit-rate compatible
Built-in DisplayAudio system built-in display LCD
Diagonal size 1.5 in
Backlight display Yes
Display illumination color Blue, White
Display menu language Dutch, Danish, French, German, Korean, English, Finnish, Italian, Spanish, Swedish, Japanese, Norwegian, Portuguese, Chinese (simplified), Chinese (traditional)
Audio FeaturesSound output mode Stereo
Amplifier response bandwidth 20 - 20000 Hz
Timer Wake, Sleep
Built-in clock Timer, Digital clock
Additional features Date display, JPEG photo playback, Upgradeable firmware, USB 2.0 compatibility
CD SystemPlayback modes Program play, Repeat one/all, Shuffle play
Digital audio standards supported MP3, AAC, WAV, AIFF, MP3 VBR, Apple Lossless
EqualizerEqualizer type Built-in
Equalizer factory preset qty 20
Equalizer factory presets Normal, Classical, POP, Rock, Jazz
Remote ControlRemote control None
HeadphonesHeadphones type Binaural Ear-bud
Sound output mode Stereo
Response bandwidth 20 - 20000 Hz
Impedance 32 Ohm
Connectivity technology Wired
Battery / PowerBattery Lithium ion Rechargeable Player batteryIntegrated
Mfr estimated battery life 14 hour(s)
Power device type None
System RequirementsPeripheral / Interface devices USB port, Docking
Operating system Apple MacOS X 10.3.4 or later, Microsoft Windows 2000 SP4 or later
OA length-transport 4.75M Drill up to 150m with 4" and up to 8" for waterwell
Drill over 100M per day
Vertical, Angle Drilling available
OA width 1.5 m
OA height-transport 2.25 m
OA height-mast up 5.2 m
Weight-less drill pipe 4.6ton
ENGINE
Model Hyundai D4AF-G
4 cylinder diesel engine
Rated power 85HP/1800rpm
Fuel capacity 80
Cooling system water cooling
TOP HEAD ROTATION
Single reduction oil bath gearbox with two heavy single speed, disc valve motor.
The gearhead is mounged outside the mast rails to ease drill pipe and casing handling.
Reduction Spur gear - 3.3 to 1
Performance two motor(Std)
Max . RPM 0~1200~60
Max . Torque 180 ,360
FEED SYSTEM
Top head driven by hydraulic cylinders throught heavy duty chain.
Traverse cylinder 90mm*55 mm*3100mm
Head travel 1st 6.2M
Pull-up capacity 12ton
Pull-down capacity 6ton
UPPER FRAME MOVE
Upper frame can be moved back and forth and casing treatment and the centering calibration are easy.
Travel 400
CRAWLER BASE
Crawler type LG #4500
Crawler speed 2.5/h
Ground pressure 0.4
3-web track shose 450
Ground clearance 300
SELF LOADING
Ground clearance 1300
Width 3000
HYDRAULIC OUTRIGGERS
Four hydraulic outriggers are fitted to the outer corners of the rig for easy and accurate levelling of the rig.
DRILL PIPE BREAKOUT
Cylinder operated pipe wrench,
Torque break-out 4ton
HYD. DRIFTER
Model JDMD700
Impact power 15~40 -M
Blow frequncy 300/~2400/min
Flow rate(max) 40~90 /min
Working pressure 150bar
Weight 700
WINCH
Planetary with spring applied hydraulic release break,with cable.
Spool capacity 17M of 10 cable
Line pull 3 Ton
HYDRAULIC SYSTEM
General 3 pump open loop system
Tank capacity 120
Filtration 10 micron
Pump model K3V63*2+32(HP constant)
Cooling system Air cooling
Operating pressure 280bar
LIFTING & ELECTRICAL SYSTEM 24V
Mast 2-60 watt floodlights
Control panel 2-gauge floodlights
Work 2-60 watt floodlights
CONTROL PANEL
All controls gauges are grouped at the operator\\\'s station within sight of the borehole.
DRILL PIPE & CASING
Drill pipe Max. length 4.5M
Casing max. diameter 8"
WORKING TABLE
Max. casing diameter 8"
HYDRAULIC HOLDER
Single Clamp 73¦~230
1. MUD PUMP
Hydraulic cylinder operated duplex piston pump.
Model JDMP200
(80ó¦*120)
Capacity 200l/min
Max. press 50bar
Valve Steel ball type
2. MUD PUMP
Hydraulic cylinder operated duplex piston pump.
Model JDMP800
(150ó¦* 250)
Capacity 800 /min
Max. press 30bar
Valve Steel ball type
3. HYD. DRIFTER
Model JDMD800
Impact power 25~50kg-M
Blow frequncy 2000/min
Flow rate(max) 120l/min
Working pressure 150bar
Weight 700 kg
4. WELDER
Hyd. Motor drive 250Amp,DC
The automatic pick and place machine TP400V-II is a cost-effective equipment in the SMT industry. It is able to fabricate a variety of components by the integrated vacuum nozzle. The machine can mount SMD chip components above 0402, SOICs, PLCCs, QFP and ICs. The Vision System is compatable with QFP ICs with a pitch of 0.5mm. Beside the round reference, also square square formed and ring hole pads can be recognized as mark point.
Features:
1. Automatic Mount by control of software.
2. Quick PROTEL data import or manual input.
3. Visual + machinery positioning.
4. Visual programming system can identify the reference point automatically to improve the production efficiency and accuracy.
5. The visual programming system can produce X, Y coordinates of all components automatically after confirmed the basic reference points and to complete the mounting process.
6. Unique optical prism and high-definition industrial cameras for placing high-precision components.
7. Equipped with a high-precision quadrate guide rail and smooth gliding arm for improving mounting accuracy.
8. Air suspended head for pick- and place-process.
9. Automatic nozzle replacement system.
Optional:
1. Automatic feeder
2. IC disc
3. Automatic PCB transmission system
Main parts:
1. DC servo motor driving system:
It uses loop DC servo motor driving system for a high precision repeating accuracy and stability.
2. Vision centering system: Vision centering system can mount 0.5mm pitch QFP ICs.
3. No-contact flying centering system: Flying centering system can mount most of SMD components including: 0402, SOICs，PLCCs & QFP ICs.
4. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed PCB pad with a whole can be identified as a reference point.
5. All-purpose automatic feeder: The TP400V-II has 8mm, 12mm, 16mm, 24mm feeders which you can choose to install.
6. Flexible tray-type station: The TP400V can equip 2 trays which helps to mount bulk components under the semi-auto mode.
7. CAD/ Protel data transfer: Besides studying the component coordinate by Camera or keyboard input, you can choose the CAD transfer software WCAD to transfer the PCB’s CAD into pick and place data.
8. Buffering nozzle: Buffering nozzle can adjust the pressure automatically according to different components height to avoid damage due to different component heights or programming errors. It is suitable for various types of pick and place ceramic components and ceramic circuit boards.
Programming method: Video study/ keyboards input/ data import
Driving way: Y-axis uses industrial synchronous belt drive, X-axis uses imported high precision lead screw.
Automatic Feeder: 8mm, 12mm, 16mm, 24mm feeder
Feeder Number: 1. Place 72 pieces of 8MM feeder CFTA-08S, 36 pieces at the front and back side.
2. Place 60 pieces of 8MM feeder GFTA-08S, 30 pieces at the front and back side.
Blumental Vanilla, Bourbon Vanilla Pods, Premium Gourmet 1A Quality - pure natural product from Madagascar
Approximately 15-17cm tall with an average of 30-35% residual moisture
Bourbon vanilla is the perfect type of vanilla and is great for baking and cooking. It also tastes particularly good with tea, coffee, cocktails, desserts, meat, fish and many other foods.
Our double checking process controls the size, smell, aroma and appearance before they are vacuum sealed, thus guaranteeing the highest quality pods for shipping.
Vannamei White Shrimp even though they are called white shrimp their shells are a light grayish-white and turn pink when cooked. The shell can be thinner than wild caught shrimp and, Farm-Raised shrimp will have a mild flavor and sometimes a less firm meat texture, due to the environment they are raised in.
White Shrimp (With Shells)
-Raw Headon Shellon : 31/40 to 80/120 pcs/kg
-Raw Headless Shellon : 21/25 to 91/110 pcs/lb
-Raw Headless Shellon Easy Peel : 21/25 to 71/90 pcs/lb
White Shrimp (P&D/PUD/PTO)
-Raw P&D/PUD Tail-on and off : 26/30 to 9 1/110 pcs/kg
-Raw PTO Butterfly : 26/30 to 71/90 pcs/lb
-Raw P&D/PUD Tail-on and Off Skewers : 26/30 to 61/70 pcs/lb
White Shrimp Rings
-Skinpacked with Cocktail : Using cooked P&D Tail-on 26/30 to 91/120 pcs/lb
-Sauce & clear dome or in printed inner box With or without sauce Ring sizes: 6 oz to 40 oz
White Shrimp Wedges
-Skinpacked with Cocktail Using Cooked P&D Tail-on 41/50 to 71/90 pcs/lb
-Sauce & clear lid Wedge sizes:- 3 oz to 4 oz
Cooked Vannamei White Shrimp (Peeled)
-Cooked P&D Tail-on (CPTO) : 26/30 to 91/120 pcs/lb
-Cooked P&D Tail-off : 26/30 to 91/120 pcs/lb
-Cooked PUD Tail-off : 31/40 to 200/300 pcs/lb
-Sushi Ebi : LL, L, M, S, SS
Cooked Vannamei White Shrimp (Shellon)
-Cooked Headon Shellon 21/30 to 51/60 pcs/kg
-Cooked Headless Shellon 16/20 to 71/90 pcs/lb
-Cooked Headless Shellon Easy Peel 16/20 to 71/90 pcs/lb
-Sushi Ebi : LL, L, M, S, SS
Highly versatile, the Black Tiger (Farmed) and Sea Tiger (Wild) together constitute the Tiger shrimp category. They have gray to black stripes on gray or bluish shells and associated stripes on peeled meat. The white flesh becomes tinged with orange if cooked peeled and red if cooked in the shell.
Raw Black Tiger Shrimp (With Shells)
Raw Headon Shellon : 31/40 to 80/120 pcs/kg
Raw Headless Shellon : 21/25 to 91/110 pcs/lb
Raw Headless Shellon Easy Peel : 21/25 to 71/90 pcs/lb
Raw Black Tiger Shrimp (P&D/PUD/PTO)
Raw P&D/PUD Tail-on and off : 26/30 to 9 1/110 pcs/kg
Raw PTO Butterfly : 26/30 to 71/90 pcs/lb
Raw P&D/PUD Tail-on and Off Skewers : 26/30 to 61/70 pcs/lb
Black Tiger Shrimp Rings
Skinpacked with Cocktail : Using cooked P&D Tail-on 26/30 to 91/120 pcs/lb
Sauce & clear dome or in printed inner box With or without sauce Ring sizes: 6 oz to 40 oz
Black Tiger Shrimp Wedges
Skinpacked with Cocktail Using Cooked P&D Tail-on 41/50 to 71/90 pcs/lb
Sauce & clear lid Wedge sizes:- 3 oz to 4 oz
Cooked Black Tiger Shrimp (Peeled)
Cooked P&D Tail-on (CPTO) : 26/30 to 91/120 pcs/lb
Cooked P&D Tail-off : 26/30 to 91/120 pcs/lb
Cooked PUD Tail-off : 31/40 to 200/300 pcs/lb
Sushi Ebi : LL, L, M, S, SS
Cooked Black Tiger Shrimp (Shellon)
Cooked Headon Shellon 21/30 to 51/60 pcs/kg
Cooked Headless Shellon 16/20 to 71/90 pcs/lb
Cooked Headless Shellon Easy Peel 16/20 to 71/90 pcs/lb
Sushi Ebi : LL, L, M, S, SS
