Peak Load Power Rate:1000W . -
We manufacture solar inverters from 100W to 7.5KW single phase inverters with 4 stage battery charging, fuse-less short-circuit protection, overload protection with auto-restart
Iacdrive|AC drives|inverter solutions I5100-PV Solar pump inverter is positioned in environmental-friendly and economical PV market, the product is applied to PV pump system, replaces water storage with electric storage and needs no battery modules. Product Advantages: The direct current generated by solar modules is input to the inverter and then converted into the alternating current to drive various pumps .The output frequency is adjustable in real time according to sunlight intensity change. Application: Agriculture, forestry irrigation, desert control, grassland animal husbandry, municipal water. The features of the I5100-PV solar pump inverter for PV Pump are as followsï¼? Maximizing power generation efficiency of solar modules with the use of advanced MPPT control technology; 1.Adjusting water outflow of pumps quickly on basis of sunlight intensity change; 2.Automatic hibernation and wakeup; (1) Hibernate at high water level and wake up at low water level; (2) Hibernate at sunrise and sunset and wake up at strong sunlight. 4.Under load protection and fault protection of water level sensor avoiding pumping off after water supply dries up ; 5.TI DSP technology and Infineon PIM design, with functions of over current, overvoltage and over temperature protection, built-in C3 filter, achieving reliable, automatic and unattended running. solar-pump-inverter-system_i5100 Solar-pump-inverter-system_i5100 Specification: Max DC input 800VDC Recommended MPPT voltage range 350~750VDC Recommended input voltage 513VDC MPPT efficiency 99.9% Input channel 1 Rated output voltage 3-phase 380VAC Output frequency range 0~60Hz Max efficiency of the machine 97ï¼? Ambient temperature range (G-type inverter with water pump) Cooling method Air cooling Protection degree IP20 Altitude Below 1000m; above 1000m, derate 1% for every additional 100m. Standard CE Main parameters of the I5100 inverter I5100-PV-solar-pumping-inverter-model I5100-PV-solar-pumping-inverter-model Iacdrive|AC drives|inverter solutions -
Iacdrive|AC drives|inverter solutions Comprehensive Technical Characteristics of Inverter Input-output Characteristics: Input Voltage Range: 380/220V±15% Input Frequency Range: 47-63Hz Output Voltage Range: 0-rated input voltage Output Frequency Range: 0-400Hz Peripheral Interface Characteristics Programmable Digital Input: 6 channel input Programmable Analog Input: 0-10V input, FI: 0-20mA or 4-20mA input Open Collector Output: 1 channel output input Relay Output: 1 channel output Analog Output: 1 channel output, optional 0-20mA or 0-10V Technical Performance Characteristics Control Mode: SVC, V/F direct torque control Overload Capacity: 150% rated current 60s; 180% rated current 10s Starting Torque: SVC: 0.5Hz/150% (SVC) Speed Regulation Ratio: SVC: 1:100 Speed Control Accuracy: SVC; ±0.5% maximum speed Carrier Frequency: 0.5k-15.0kHz Functional Characteristics Frequency Setting Mode: Digital setting, analog setting, serial communication setting, multistage speed, PID setting, etc. PID Control Function Multistage speed control function: 8-stage speed control Swing frequency control function Nonstop function during momentary interruption Dormancy function Fan automatic control capacity QUICK key function: Multifunctional shortcut key freely defined by user Automatic voltage adjustment function: Automatically keep constant output voltage when the grid voltage changes 25 fault protection functions: Overcurrent, overvoltage, undervoltage, default phase and overload protection functions, etc. Inverter model Input voltage Rated output power (KW) Rated input current (A) Rated output current (A) Adaptive motor I530D423A Single-phase 220V±15% 0.4 5.4 2.3 0.4 I53D7523A 0.75 8.2 4.5 0.75 I531D523A 1.5 14.2 7.0 1.5 I532D223A 2.2 23.0 10 2.2 I53D75G01D5P43A Three-phase 380V±15% 0.75 3.4 2.5 0.75 I531D5G02D2P43A 1.5 5.0 3.7 1.5 I532D2G03D7P43A 2.2 5.8 5 2.2 I534D0G05D5P43A Three-phase 380V±15% 4.0/5.5 10/15 9/13 4.0/5.5 I535D5G07D5P43A 5.5/7.5 15/20 13/17 5.5/7.5 I537D5G0011P43A 7.5/11.0 20/26 17/25 7.5/11.0 I53011G0015P43A 11.0/15.0 26/35 25/32 11.0/15.0 I53015G0018P43A 15.0/18.5 35/38 32/37 15.0/18.5 I5318D5G0022P43A 18.5/22.0 38/46 37/45 18.5/22.0 I53022G0030P43A 22.0/30.0 46/62 45/60 22.0/30.0 I53030G0037P43A 30.0/37.0 62/76 60/75 30.0/37.0 I50037G0045P43A 37.0/45.0 76/90 75/90 37.0/45.0 I53045G0055P43A 45.0/55.0 90/105 90/110 45.0/55.0 I53055G0075P43A 55.0/75.0 105/140 110/150 55.0/75.0 I53075G0090P43A 75.0/90.0 140/160 150/176 75.0/90.0 Copyright 2012-2017 Iacdrive| All Rights Reserved | Powered by Iacdrive | Suunn -
S5300-ce is designed for the construction of load characteristics and control requirements of a specially developed integrated control of a dedicated inverter. Integrated construction elevator electrical logic, frequency control, brake power, overload protection, increase text display, voice broadcast, floor call, automatic leveling, gprs function. To meet the energy-saving, low-speed and medium-speed construction lifts in the high-end application requirements. Specification: Integrated Integrated electrical logic control, variable frequency control, brake unit, overload protection, brake power, elevator control cabinet to achieve protection and protection functions; Safe and reliable Lifting special holding brake control; Pre-excitation and torque verification function, to prevent slip car; Zero detection, to prevent misuse of the joystick; Dozens of fault protection, deal with all kinds of unexpected situations; Dedicated Customized protection design, independent terminal configuration, flexible installation, easy maintenance; When the load is light, enhance the running speed; Dedicated phase protection, low-voltage logic control to ensure safe operation of equipment; Rich to expand Secondary platform development; With automatic leveling and gprs functions; -
Comprehensive Technical Characteristics of Inverter Input-output Characteristics: Input Voltage Range: 380/220V±15% Input Frequency Range: 47-63Hz Output Voltage Range: 0-rated input voltage Output Frequency Range: 0-400Hz Peripheral Interface Characteristics Programmable Digital Input: 6 channel input Programmable Analog Input: 0-10V input, FI: 0-20mA or 4-20mA input Open Collector Output: 1 channel output input Relay Output: 1 channel output Analog Output: 1 channel output, optional 0-20mA or 0-10V Technical Performance Characteristics Control Mode: SVC, V/F direct torque control Overload Capacity: 150% rated current 60s; 180% rated current 10s Starting Torque: SVC: 0.5Hz/150% (SVC) Speed Regulation Ratio: SVC: 1:100 Speed Control Accuracy: SVC; ±0.5% maximum speed Carrier Frequency: 0.5k-15.0kHz I5300_Elevator_closed_loop_inverter_2017 I5300_Elevator_closed_loop_inverter_2017 Name rules: I5300E_closed_loop_inverter_name_rules I5300E_closed_loop_inverter_name_rules Specification: 1.Applies to the driving control of permanent-magnet synchronous motor and asynchronous motor, possessing different kinds of rotary encoder interfaces; 2.Self-tuning function of motor parameters, including static tuning and full tuning; 3.Quick startup of curve processing, multi-stage S curve settings and 4-stage acceleration and deceleration time settings ensure the sense of comfort during the running of the elevator; 4.Simple and practical battery running function, the input of 48V power supply can complete self-help when power is off; 5.Enable inspection�brake contactor control, output contactor control, forced deceleration judgment, over speed testing, speed deviation testing, advanced door open, contact conglutination testing, motor overheat testing, startup pre-torque compensation and other elevator special functions make elevator control easier; 6.The unique one-button design on the operation panel make complicated keyboard operation easy; 7.Built-in DC reactor and braking unit improve output power factor of the system and reduce the cost of outside components of the electrical system� 8.The whole series of independent duct design, professional lightning protection design, professional manufacture platform and advanced processs control ensure the quality of I5300 specialized Elevator inverter; Main parameters of the I5300 Elevator inverter (IP model included) Model Capacity KW Input current Output current Adoptable motor kW A A 3-phase 380V range�-15%�20% I5300-4002 4 5.8 5.1 2.2 I5300-4003 5.9 10.5 9 3.7 I5300-4005 8.9 14.6 13 5.5 I5300-4007 11 20.5 18 7.5 I5300-4011 17 29 27 11 I5300-4015 21 36 33 15 I5300-4018 24 41 39 18.5 I5300-4022 30 49.5 48 22 I5300-4030 40 62 60 30 I5300-4037 57 77 75 37 I5300-4045 69 93 91 45 Iacdrive_Elevator_solutions_inverter Iacdrive_Elevator_solutions_inverter Copyright 2012-2017 Iacdrive| All Rights Reserved | Powered by Iacdrive | Suunny -
Comprehensive technical characteristics of inverter Input-output characteristics: Input voltage range: 380/220vâ±15% Input frequency range: 47-63hz Output voltage range: 0-rated input voltage Output frequency range: 0-400hz Peripheral interface characteristics Programmable digital input: 6 channel input Programmable analog input: 0-10v input, fi: 0-20ma or 4-20ma input Open collector output: 1 channel output input Relay output: 1 channel output Analog output: 1 channel output, optional 0-20ma or 0-10v Technical performance characteristics Control mode: svc, v/f direct torque control Overload capacity: 150% rated current 60s; 180% rated current 10s Starting torque: svc: 0.5hz/150% (svc) Speed regulation ratio: svc: 1:100 Speed control accuracy: svc; â±0.5% maximum speed Carrier frequency: 0.5k-15.0khz Iacdrive|ac drives|inverter solutions Iacdrive|ac drives|inverter solutions Iacdrive|ac drives|inverter solutions -
I5h high performance torque control inverter for automatic door I5h high performance torque control inverter for automatic door I5h high performance torque control inverter for automatic door I5h high performance torque control inverter for automatic door I5h series inverter base on high performance vector control and torque control technology platform, modular software and hardware features to meet the lifting, crane, papermaking, chemical fiber, elevator, mill, packaging and other high-end industrial applications demand. Â??vector control 1ï¼? offering excellent vector control performance and insensitive to motor parameters. Startup torque: 0.50hz 180% rated torque speed adjustment range: 1:100 speed stabilization precision: â± 0.5% 0.50hz controlble motor stable operation with 150% rated torque. Â??vector control 2 (without encoder speed feedback)ï¼? precise speed sensorless vector control technology realizes ac motor decoupling, enabling the dc motorization of operation control. Startup torque: 0.25hz 180% rated torque speed adjustment range: 1:200 speed stabilization precision: â± 0.2% 0.25hz controllable motor stable operation with 150% rated torque. Â??vector control 2 (with encoder speed feedback)ï¼? startup torque: 0.00hz 180% rated torque speed adjustment range: 1:1000 speed stabilization precision: â± 0.02% Â??open loop torque control modeï¼? independent current loop control to realize true torque control, supporting online switching of torque control and speed control. Torque precision: â±5% torque response time: I5h_inverter for automatic door I5h high performance torque control inverter technical specifications Control features Control mode Vector control 1 Vector control 2 (without encoder) Vector control 2 (with encoder ) Startup torque 0.5hz 150% 0.25hz 180% 0.00hz 180% Speed adjustment range 1ï¼?100 1ï¼?200 1ï¼?1000 Speed stabilization precision ±5% ±0.2% ±0.02% Torque control N Y Y Torque precision N ±5% ±5% Torque response time N -
This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp Input voltage: 12VDC Kick-off Voltage: min1500 Lamp Voltage: 500V Output Connector Mode: SM02B/ SM02 (8.0)*2 Transformer Qty: 2 Output Current: 6mA Output Voltage: 500V Frequency: 40 KHz Dimmer: Yes Dimension : 95.5mm*20mm*4.7mm.
Input voltage100-240 Vac Input signalDMX/RDM, PUSH DIM Output0-10V x4CH(Default)/5V PWM x4CH/10V PWM x4CH Dimming Range0~100% working temperature-30?~55? DimensionL175×W44×H30(mm) Package SizeL178×W48×H33(mm) Weight (G.W)130g
Input voltage DC12V~DC24V Input signal PWM x3CH (compatible with CV/CC Power PWM and Signal PWM) Output 10V PWM x3CH Dimming Range~100% working temperature -30?~55? Dimension L121×W39×H39(mm) Package Size L123×W42×H42(mm) Weight (G.W) 80g
Place of origin:guangdong, china (mainland) Brand name:emheater Model number:em11series Output power:1 - 200kw Output type:triple Size:236mm*149mm*180mm Weight:4.5kg Input voltage:220v Output voltage:220v Type:ac/ac Output frequency:50hz/60hz Output current:4a Certification:ce-emc ce-lvd Advantage:integrated igbt Color:blue/metal gray/black/white Shell:plastic/metal Control mode:sensorless vector control Warranty:18 months Shipment:air/sea packaging & delivery Packaging details: Emheater 220v three phase em11-series ac frequency inverter & frequency converter Standard export packing, suitable for long distance transportation Delivery detail: 3 days
TellS Introducing new solar inverter, or photo-voltaic inverter, or Solar converter, converts the variable direct current (DC) output of a photo-voltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. Worked Off-grid with Battery Bank. Customize priority with options of Solar - Battery - Grid & Solar - Grid – Battery. Efficiency more Then 95%. Inbuilt solar charge controller with the option of MPPT & PWM technology. Intelligent operation for improved battery life. In case of unavailability of solar, charging from grid. Low change over time in µsec. Suitable for Roof - Top projects. Option for data logging through RJ-232 cable. Standalone-High Frequency Solar Inverter: 100VA/12V, 300VA/12V, 400VA/12V, 500VA/24V, 750VA/24V 1600VA/48V, 2000VA/48V Off-Grid Solar Inverter-1 phase in-1 phase out: 5KVA/48V, 5KVA/96V, 7.5KVA/120V, 10KVA/180V Off-Grid Solar Inverter-3 phase In-3 phase out 20KVA/240V, 30KVA/240V, 40KVA/360V, 100KVA/360V
dc to ac 12/24/48v 220v off grid pure sinewave inverter Hybrid Pure Sine Wave Inverter Controller Rainbow Star Series 1000Va-5000Va (1ph in/1ph out) Key Features 1:Built-in MPPT solar charge controller 2:Low battery voltage trip selectable 3:Auto restart while AC is recovering 4:High Reliability: Double CPU Digital Control 5: Soft start: Smooth start-up of the appliances 6:Working noise is low and the efficiency is high 7:Compatible to mains voltage or generator power 8:Selectable charging current based on applications 9:Programmable supply priority for PV ,batetry or grid 10: Wide range of input voltage ,accurate output,AVR function 11:Smart battery charger design for optimized battery performance 13:LED & LCD Display on the front panel shows the working and failure state Applications Supply the reliable long back up time power for the home appliances and Portable lights,Alarm systems,Power tools,Control Equipments,Security Systems,Medical Equipments etc
Power Inverter DC 12V to AC 220V for air conditioner Model:Pure Sine Wave Inverter Charger Power Star Series PS8Kw-12Kw (1ph in/1ph out) Applications: UPSEN Power Star Inverter ,can be used with different domestic appliance like TV,fan,air conditioner,cooker,mirco-wave oven,etc. Key Features: 1:LCD status display available 2:3-step intelligent battery charging 3:RS232 communication port optional 4:Start Auto restart while AC is recovering 5:Superior performance from CPU control technology 6:Delay before transfer, extra protections for loads under generator mode 7:Generator compatibly and external battery connection achievable 8:Solar Energy , City power , DC to AC can transfer automatically 9:Low battery voltage trip selectable, extracting max power from various batteries with different protections 10:Solar function: Charges battery from grid power on no-Solar time and charges battery from solar on solar time manually
Application: PEUGEOT EXPERT Tepee (VF3V_) 2.0 Hdi 07- FIAT SCUDO 2.0 D Multijet 07- CITROEN JUMPY 2.0 HDi 120 07- OE No. 6455.ES Packaging Size: 69,1x48,6x6,9cm Gross Weight: 3,2kg
Grid tie solar inverter is the core euqipment for the solar power system. It convertes DC power from solar panel into AC power. Meanwhile, it can also feeds power to the grid to get the pay from electricity company. It's a good solution to save your electricity bills!!! Each pc per export carton ,then into wooden carton
VTdrive R&D team and management was core leader of Frequency inverter development in China. The most experienced VTdrive R&D team was developed over 2 million pieces ac drives in 15 years. The R&D spending over 32 million USD. 2006 up to now the R&D team finished the third generation VFDs (high performance vector and torque control) in VTdrive.VTdrive has proprietary intellectual property rights of all our software and hardware design. We not only production general purchase drives but also can customized for special purpose.VTdrive cooperated with same high-end materials suppliers and outsourcing factories with best frequency inverter manufacturer in CHINA. VTdrive strictly according with the ISO 9001 quality management system of production to ensure quality of product. VTdrive products meet up with IEC standard and passed CE approve.
Build-in MPPT function Operating Temperature: -10 to +50˚C Variable Frequency Drive (VFD) to provide maximum torque with minimum sunlight directly connected to the pump and system Low voltage and high voltage protect function Soft starting, protect pump from damage Automation control and hand control LCD Display
Pure sine wave inverter Built-in advanced DSP-controlled MPPT solar charge controller Selectable input voltage range for home appliances and personal computers Selectable charging current based on applications Configurable AC/Solar input priority via LCD setting Compatible to mains voltage or generator power Auto restart while AC is recovering wooden
