Nearly all the kind of the springs of the forklift.
Technical data : 1KG=2.2LB 1INCH=25.4MM Model No. SEN1520, SEN1525, SEN1530, SEN1535, SEN2020 Rated Capacity kg 1500, 2000 Load Center mm 400 Max. Fork Height 2000, 2500, 3000, 3500, 2000 Max. Machine Height 2560, 3060, 3560, 4060, 2560, Fork Length 1000 Fork Width 300-850 Min. Turning Radius 1350, 1450, 1350 Wheel Base 1185 Front-Wheel Distance 316 Lifting Motor v/kw 12/1.5-1.6 Aneroid Battery v/Ah 12/120-150 Charger v/A 12/15 Overall Length mm 1660 Overall Width 865, 930 Overall Height 1580, 1830, 2080, 2330, 1580 Overall Net Weight kg 448, 470, 492, 515.
Smooth travel and lift combine excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. High quality hydraulic pump assures very little noise, maximum efficiency and durability. Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonomically designed with a raise, lower and horn button. Speed automatically reduces when driving with the forks at a height of 12" or higher. Small turn radius makes it suitable for narrow passage ways. The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life. Foot pedal reduces fatigue. Built-in charger. Technical data Residual Capacity at different lifting height. 1KG=2.2LB 1INCH=25.4MM Up to h3 mm ACTUAL CAPACITY (Q) kg 2500, 1500, 1000 2900, 1000, 700 3400, 800, 500 Load center distance (C)mm 600, 700 With CURTIS electric control from Germany Equipped with METRLROTA driving wheel and HPI pump unit from Europe. Heavy duty design with top quality mast construction of HOSCH steel from Germany. Identification 1.2 Manufacturer's type designation FL1529 FL1534 1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric 1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian 1.5 Load Capacity /rated load Q (t) 1.5 1.6 Load center distance C mm 600 1.8 Load distance, center of drive axle to fork X mm 677 1.9 Wheelbase y mm 1183 1168 Weights 2.1 service Weight Kg 1020 1120 2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375 2.3 Axle loadings, unladen front/rear Kg 755/265 826/295 Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane 3.2 Tyre size, front 250x78 3.3 Tyre size, rear 80x70 1) 3.4 Additional wheels(dimensions) 150x54 3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4 3.6 Track width,front b10(mm) 685 3.7 Track width,rear b11(mm) 390/515 Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465 Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4 5.2 Lift speed, laden/unladen mm/s 105/170 5.3 Lowering speed, laden/unladen mm/s 100/95 5.8 Max.gradient performance, laden/unladen % 6/12 5.10 Service brake Electromagnetic E-Motor 6.1 Drive motor rating s2 60min kw 1.2 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. To DIN, no 3PZS 6.4 Battery voltage, norminal capacity V/Ah 24/210 Others 8.1 Type of drive control MOSFET Control 8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67 1)Single wheel 80x93 .2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465.
Disassembling and assembling is easy Can fit into smaller spaces when disassembled Equipped with wheels on the mast also allow it to be user as a trolley; Light alumium mast, easy for handling. No any hydraulic problem, because it's operated by winch. The best brake function with special design is obvious. Technical data : 1kg=2.2lb 1inch=25.4mm Item/type: Wfh-181, Sw-181, Wfh-227, Sw-227 Capacity q Kg: 181, 181, 227, 227 Load center Mm: 305, 305, 305, 305 Max.Fork height Mm: 2500, 1700, 1250, 1250 Min.Fork height Mm: 90, 50, 90, 50 Fork length Mm: 570, 570, 570, 750 Fork width Mm: 630, 1100, 630, 1100 Net weight Kg: 60, 66, 51. Fork length570. Fork width1100. Net weight66kg.
Forklift parts.
Brake system forklift parts
Electric system forklift parts.
Chassis parts forklift parts.
Cooling system forklift parts.
3304DP CYLINDER HEAD COMPLETE 3304DP CYLINDER HEAD COMPLETE 3304DP CYLINDER HEAD COMPLETE 3304DI CYLINDER HEAD COMPLETE 3304DI CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3306DP CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3406 A CYLINDER HEAD COMPLETE 3406 B CYLINDER HEAD COMPLETE 3406 A-DI CYLINDER HEAD COMPLETE 3408 A-DI CYLINDER HEAD COMPLETE 333 C CYLINDER HEAD COMPLETE 330 C CYLINDER HEAD COMPLETE. PALLET 120X80X80.
3306di Engine block only-6 cyl in line 6n 7986 3412 b Engine block only- v12- 2w 4857. Pallets.
Forklift.
The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customers samples. Export standard packing.
The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customerf+s samples. Export standard packing
Xkd-f series joystick is mainly used in ac 50hz/60hz, 380v/220v main or control circuit, controls the hoist carrier and starting , timing, commutating, braking the motor in the similar electricity control device. The crane control unit xkd-f series is a device according to german advanced technology. Parameters Related operational voltageú¦220v/380v ac Related operational currentú¦10a/5a Related operational frequencyú¦40times/minunite Related sustained rate of galvanizationú¦40% Electric lifeú¦600 thousand times Mechanical lifeú¦4 million times Protect classú¦ip00 Approximately 2kg/set
his anti-collision device is a tower crane safety system. It has the following functions: CXT/800 system protection Tower crane Anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once anticipating the hook or cable of the higher tower crane may collide the jib or counter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site. The CXT/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accidents from happening. Pre-alarm/alarm and control CXT/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitive areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, trolley amplitude, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls.
This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, angle of the jib, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls. carton
Forklift parts.
Our company is able to provide various parts for series forklift trucks, and our parts are in high quality and competitive price. We can also give you the technical support.
