Clamps Suppliers and Manufacturers

Foundation Nut And Bolt

Type: Single Band, Double Band, Triple Band, Mini Type, Semi Type Size Range: DN50-DN600 Length: 150mm-600mm Band/Clamp: Stainless steel AISI 304 Rubber Gasket: EPDM/NBR Bolts: Galvanized steel Nuts: Stainless steel A2-70 Working Pressure: PN10, PN16 Be used on repairing of cracks, breaks and holes of different kinds of pipelines like cast Iron, ductile Iron, steel, asbestos cement, PVC, HDPE pipe etc. Suitable for water, sewage, gas, oil etc. -

Item No.: M00302 Specification: 3" 4" 6" 9" More information can view Auto Tools Depot.

C Clamp Item No.: M00325 Specification: 4" More information can view Auto Tools Depot.

Satety clamps type C and Type T are necessary tools for handling flush joint pipe and drill collar , They can accommodate pipes from 1 /1/8 to 15 5/8 inch. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment. Satety clamps type MP are necessary tools for handling flush joint pipe and drill collar and small shoulder pipes, they could adjust pipes of different sizes by changing the quantity of chain links. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.

Safety Clamps Type MP are necessary tools for handling drill collars, flush joint pipes and small shoulder pipes. They could adjust pipes of different sizes by changing the quantity of chain links. They are designed and manufactured according to API 7K.

Capacity IN Tones Jaw Openng A Plate ADMIT C Body DIA B CAM DIA Ring Size d X D Weight Per Pair Kgs Pair Each 1 0.5 50 150 40 16 16 X 75 12 2 1 60 170 45 16 20 X 85 13.5 3 1.5 70 200 55 20 22 X 95 28.5 5 2.5 85 260 65 25 25 X 95 40 10 5 95 300 90 32 32 X 135 78 20 10 150 400 120 40 45 X 200 160

DSQ Vertical Plate Lifting clamps are used for lifting and turning over plates from horizontal to vertical positions. DSQ Vertical Plate Lifting clamps are made with hardened steel jaws for firm grip and proper locking. DSQ Vertical Plate Lifting clamps in a small easy to handle tool, incorporated with a spring lock which facilitates attaching of the clamps to the plates. Model WILL Opening (mm) Weight (Kg) DSQ1 1 50 3.7 DSQ2 2 55 6.3 DSQ3 3 70 10.5 DSQ5 5 90 19.3 DSQ8 8 130 40 DSQ12 12 150 52 DSQ16 16 160 55 Warning Do not exceed Working Load Limits. Avoid Superficial Gripping. Do not exceed specified angle of Lift (Not more than 60). Check the cams periodically for excessive wear and tear and reject if found unsafe.

Model SL - PLC Model : SL - PLC CAPACITY Shackle Size Plate Size EACH PAIR 1.5 3 16 X 19 16 2.5 5 16 X 19 25 4 8 19 X 22 28 5 10 19 X 22 32 7.5 15 25 X 28 35 10 20 25 X 28 45

I - Beam Clamps (Model: SL - IBC) Capacity Flange Width 1 3" - 7" 2 3" - 7" 3 3" - 12" 5 4" - 13" 10 4" - 13" 15 5" - 16" 20 5" - 16" Spare Parts for IPTK Safety Lifting Clamps: Order No. 1. Body Complete 1041 2. Hoisting Eye Complete 1235 26. Hingeshaft Complete 0232 36. Screwed Spindle Complete 1362 Important Features Lower construction height due to integrated traverse. Reduced Stress on I - Beam flange due to specially designed clamp jaws. Adjustable for a wide range of I - Beam widths & Profiles (INP, IPE & IPB) Strong Industrial Design Clamp corresponds to standard specification for vertical load pick-up. Each quipment is serially numbered, tested by a competent authority 50% overload & is given Test Certificate. Optional feature special ofshore version model IPTKO (including 3.lB certificate)

SL- 450 Front and Side View Sealinkers Clamps Each clamps has a product Identification Code for Material traceability, the name Sealinkers or SL, and a size forged into it. Entire Clamps are galvanized / Powder Coated to resist corrosive and rusting action. Only Genuine SL Clamps have a Yellow colour for instant recognition. All Clamps have rolled threads and extra heavy nuts. Rope Size Dimensions (mm) Min No. of Clamps Amt. of Rope to Turn Back in (cm)P (in.) (mm) A B C D E F G H 3/8 9-10 11.2 38.1 19.1 25.4 23.1 19.2 41.4 49.3 2 16.5 1/2 13 12.7 47.8 25.4 30.2 28.7 22.4 48.5 58.0 3 29.2 5/8 16 14.2 60.5 31.8 33.3 34.0 23.9 52.5 63.5 3 30.5 5/4 18-20 15.8 70.0 36.6 38.1 35.8 26.9 57.0 72.0 4 46 7/8 22 19.1 79.5 41.2 44.5 40.4 31.8 62.0 80.5 4 48 1 24-26 19.1 89.0 46.0 47.8 45.2 31.8 67.0 88.0 5 66 1 1/8 28-30 19.1 98.5 51.0 51.0 48.5 31.8 71.5 91.0 6 86 1 1/4 32-34 22.4 108 45.0 58.5 55.5 36.6 79.5 105 7 112 1 3/8 36 22.4 118 58.5 60.5 58.5 36.6 79.5 106 7 112 1 1/2 38-40 22.4 125 60.5 65.5 62.0 36.6 86.5 113 8 137 1 3/4 44-46 28.7 146 70.0 77.5 74.5 46.0 97.0 134 8 155 2 48-52 31.8 164 76.0 86.0 83.5 51.0 113 149 8 180 Note Refer to table I in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope - live end rests in saddle (Never Saddle a dead horse!).Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.

Bull Dog Grips (ISS) IS: 2361 / 1970 Drop Forged Steel Wire Rope Bull Dog Grips Note : For intermediate sizes of wire ropes, the next larger size of bull dog grip shall be used.

ISO Springs|Mould clamps|Die part Chinese- Dalian Mintadely mould Co., Ltd. was established in Dalian in 2006, Mainly engaged in the design and manufacture of plastic mold China, injection mold China, China mould, automobile parts mold of semiconductor, IC connector, lead frame electrical connection and motor fixed rotor, as well as various precision mold spare parts and spare parts. We guarantee to provide customers with excellent design and first-class quality products at any time and occasion. ISO 9001:2008 Certified Your Trusted Plastic Molds, Injection mold, Die Parts, Die Casting mold Partner in China. We are not only make molds and parts for you, but also your technical supporting team. Who using our mould: Meredes-Benz, BMW, Audi, Honda, Toyota, Volkswagen, Nissan, Mazda,etc. We have design department, laboratory and testing center and a R&D team with a strong technical and experienced to ensure continuous improvement and innovation of processes and products to meet the different needs of different customers. Apply ERP system, implement standard management in process, quality, delivery, product, service. Ensure customer's product quality and delivery time. With many years of experience in mold design, manufacture, molding, leading technical solutions and perfect quality service, we can keep our eyes on the global market while consolidating existing customers.

@ Model No. M8021, M8010 @ Made in Taiwan #Key Features 1. Zinc plated frame & bolts even better rust-proof. 2. Heat treatment with bolt front end, tight fasten with channel steel for an anti-shake, loosing prevent factor. 3. Fastening torque for general steel: 75 kgs/cã?¡ be aware keeping from over fastened. #Main Export Market AFRICA ,ASIA ,AUSTRALASIA ,C-AMERICA ,EUROPE ,MID-EAST ,N-AMERICA ,OTHER ,S-AMERICA