Tripowmotor
Model Number Y80M-Y315L
Type Asynchronous Motor
Frequency 50Hz or 60Hz
Output Power 0.37-315KW
Protect Feature IP54 OR IP55
Phase Three-phase
Certification CCC, CE
AC Voltage 180V-690V
Y series motor is commonly applied in machinery and equipment without special requirements, such as agriculture machinery, food machinery, fan, agitator and air compressor etc
With IP54protction, class F inslution. With IC411cooling.
Y2 series three phase asynchronous motors is a kind of totally enclosed fan-cooled squirrel-cage AC asynchronous motors with IP54/IP55 protection and class F insulation, its efficiency are in conformity with EFF 2 standard European. Y2 Series motors are widely used as drive mechanism of various machineries, such as pumps, compressors, machining equipments, transportation system, agricultural mechanism, food processing mechanism etc.
Frame 80 to 315, 2/4/6/8 poles, 10/12 poles for frame 280 and frame 355 on request.
8) EFF: EFF3
9) Poles: 2, 4, 6, 8
10) Cooling method: IC0141
11) Mounting types: IMB3, IMB5, IMB35, IMB34, IMB14
12) Operating mode: S1
13) Connection: "Y" type for 3kW and downwards, "D" type for 4kW and upwards
14) Ambient temperature: -15C
15) The altitude should be lower than 1, 000m above the sea level
16) Relative humidity: Not higher than 90%.
YCT series electromagnetic speed adjustable motor is akind of governor motor which adopts the method of changing exciter current
YCT series electromagnetic speed adjustable motorIt is a kind of governor motor which adopts the method of changing exciter current to adjust output rotational, . It has the advantages of high efficiency, low noise, low vibration, wide governor range, no out-of -control area and with negative feedback of speed. Its power grade and installationsize conform to the standard of JB/T7123-93 and IEC, and it was jointly listed by State Planning. Commission, State Economic Commission, Ministry of Finance, Ministry of Power & Machinery as well China Industrial and Commerce Bank as Sixth lot, seventh lot, tenth lot energy-saving product. On the first session of China Machinery Product Fair, it was appraised as "excellent energy-saving product in machinery industry".
It consists of three-phase induction motor, electromagnetic difference change clutch and speed indicating generator. It is usually mated with Model JD or ZTK controller to form a set of AC stepless governor device. It is widely applicable to the industries of textile, dying, cement, paper-making, printing, rubber, plastic, sugar-making, agitation, air blowing, fiber and cable, etc.
Technical data: Power range 0.55-90kw center
Height of frame: 112-355 rated voltage of the motor: 380V(three phase)220V(single motor) excitation winding: No more than 90VV(DC) rated voltage of the controller: 220V rated frequency: 50Hz or 60Hz or special
Pretection class: B
Duty type: S1
Connection: Y start--0.12kw up to 3kw delta--4kw or more.
Y2 series three phase electric motors is a kind of totally enclosed fan-cooled squirrel-cage AC asynchronous motors with IP54/IP55 protection and class F insulation, its efficiency are in conformity with EFF 2 standard European.
In favor of its perfect design, Y2 series electric motors have a lot of advantages including high efficiency, energy saving, large starting torque, excellent performance, low noise, low vibration, compact structure, high reliability, easy operation & servicing etc.While the mounting dimension and rated output power of Y2 series electric motors are in conformity with IEC standard.
Y2 Series motors are widely used as drive mechanism of various machineries, such as pumps, compressors, machining equipments, transportation system, agricultural mechanism, food processing mechanism etc.
Frame 80 to 355, 2/4/6/8 poles, 10/12 poles for frame 280 and frame 315 on request.
Rated output: 0.37KW - 200KW
B3 /B5 /B14 /B35 /B34 mounting;
Mounting dimensions according to IEC60034 standard.
Wate spray fan design principle
The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust.
Main parts
(1) Fan motor
(2) Impeller
(3) Fan guards
(4) Jet plate
(5) Water tank
(6) Pump
(7) Standing pole (Ground)
(8) Push pedestal (Ground)
(9) Switch box (Wall)
Parameter
(1) Dimension: 650 mm (26inches)
(2) Voltage: 220 ~ 240V
(3) Fan height: adjustable from 1700mm to 2000mm
(4) Fan oscillation adjustable: 90 degrees automatically
(5) Fan tilt adjustable: 30 degrees
(6) Available area: 50 square meters
(7) Temperatures drop: 4 íµ- 8 íµ
(8) Operation Temperature: 20 íµ- 80 íµ
(9) Operation Humidity: 20% - 85%
(10) Quantity of atomization: 0 - 8L/h
(11) Diameter of atomized drip: < 10 um
(12) Capacity:Ground): 38 L
(13) Jet distance: 8 m
(14) G.W: 28.8KG; CBM: 0.20M3
Characteristics
(1) Thin atomized water drips, long range of spraying, no water dropping.
(2) No special demand of the quality of the water and water pressure.
(3) Single used, fine enginery, more agile, wide range of using.
(4) Easy to install, convenient to move.
(5) 90 degrees oscillation, three speed control, blowing without atomization.
(6) Waterproof electric design, safe use
(7) Adjustable misting volume, low noise
Application
The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity.
Advantage
(1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning.
(2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure.
(3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house.
(4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade.
It include four boxes:
(1)Box 1:POLE 125CM*8CM*15CM
(2)Box 2:WATER TANK 47CM*42CM*43CM
(3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM
(4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Applications and features:
Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact
Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc.
Operating conditions:
Type of liquid:clean water with no suspended solids or abrasive material
Maximum liquid temperature_50¦
Maximum suction height_10m
Maximum working pressure_10bar
Performance range
Flow rate up to 60 l/min.(3.6m3/h)
(head up to 45m
Operating limits
(suction lift up to 10m
(fluid temperature up to 60pc
(maximum ambient temperature 40pc
Apply scope
(they are the same with household drinking water, miniature farming navigation for low water levels suburb or rural areas, high buildings and factroies, mines, enterprises, high reach water and long distance water.
Introduction of framework
(screw pumps are made up of machinery sealed parts with two ends of screw rubber stators, dry or horrent oil submersible electric engines, both electric engines and pumps adopt rubber or universal machinery linkers, no slot outside.
Pumps installation and applications
(qj submersible well motor pump is a complate set of equipment to puming water from deep-well.It is widely used for farm irrigation, water supply and drainage in factories and mines proving human being and animals with drinking water in plateau or mountain areas.
Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact
Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc.
Operating conditions:
1.Type of liquid:clean water with no suspended solids or abrasive material
2.Maximum liquid temperaturef_50f¦
3.Maximum suction heightf_10m
4.Maximum working pressuref_10bar
Performance range
Flow rate up to 40 l/min.(2.4m3/h)
(head up to 38m
Operating limits
(suction lift up to 10m
(fluid temperature up to 60fpc
(maximum ambient temperature 40fp
