black carbon inside conductive polyester fiber filaments 50D/8F sandwich type for anti static harness cord a) cross section: sandwich type. b) conductive materials: carbon grains. c) surface resistance: 10^6 ohm. d) thickness: 50D e) filament(s):8F Application: Embeded this conductive filaments into the fabric of anti-static work wear and cleanroom garments by regular grd/stripe , this fabric could electro static discharge . * Dustless fabric * linings of top grade suit * Anti-static kniting gloves * Anti-static fabrics * Anti-static single yarn drill and ply-yarn drill * Anti-static filter felt . * Anti-static harness cord. Packaging & Shipping 500-800grams/bobbin, is not even net weight. 16 or 24 bobbins/carton Could ship by international express or by general air transportation or by sea.
Vacuum plasma cleaner Vacuum plasma cleaning equipment has features as: high precision, fast response, easy manipulation and compatibility, perfect function and professional technical support. The details are as below: A), It has a high handling uniformity; B), With lower ionic energy, unable to damage the substrate; C), Without contamination to the electrodes and the substrates; D), With patented design of special plasma electrodes; E), With high density of plasma source; 1), High efficiency of plasma cleaning . 2), Can control low ionic energy. 3), Can combine chemical reactivity and physical impact. F), With fast processing speed, high cleaning efficiency and reliability. G), With wide operating range. H), A wide range of process gases can be used. I), Fully automatic and easy to operate. J), The equipment is stable and easy to maintain. K), Its design can be changed or modified according to customerâ??s requirements. Application range: It is applicable for the industries of printed circuit board, semiconductor IC field, silicone, plastic, polymer field, automotive electronics as well as aviation, etc. the details are as following: 1, For printed circuit board industry: To activate the surface of high-frequency board, to clean the surface of multi-layer board, to decontaminate the surface of soft board and soft and hard combination panel, to activate soft panel before reinforcement, are within the capacity of the plasma cleaner. 2, In semiconductor IC field: In COB, COG, COF, ACF process for cleaning before printing and welding, the plasma cleaner is applicable effectively. 3, In the production areas of silicone, plastic, polymer: The plasma cleaner is used for surface roughening, etching, activation, etc.
Anti-fingerprint vacuum coaters Our company takes technical innovation to update the design of our mf sputtering deposition, coupled with cvd and thermal evaporation technology into a comprehensive deposition. Thus, it greatly improved the sputtering quality with characteristics of good adhesion, hardness, with functions of anti-impurity, anti-friction, anti-aging, anti-solution of film deposited. So the coated substrates are able to pass the quality tests, such as solution soaking and water boiling. This kind of model machines can deposit ar, af or as films in the same batch for mass production, appropriate to the decorative coating on metal and glass substrates. By this kind of model machines the anti-fingerprint deposition can be realized by our innovative method. This kind of mf sputtering machines has features of large-quantity substrate loading with advantages of high efficiency, simple process, convenient manipulation and high uniformity, widely applicable for in the production fields of mobile, golf, digital camera, computer and other electric apparatus.
Kind of extrusion line According goods size
9702;built under test of industrial standard, meets tia/eia-568-8.3 and iso/iec 11801:202 ed2.0, telcordia (belicore) gr-326-core 9702;single-mode fiber connectors and patch cord requirement 9702;iec874-1 fiber connector and cable instruction, based on tia/eia-568 standard on a-8 designing, 568sc zip patch cords are internal cross-over, a-b to b-a, suitable for mtrj-mtrj and lc-lc and hybrid patch cord (568sc-st, 569sc-mtj and mtrj-st compatible duplex patch cord) 9702;all patch cords are labeled with print on cable
Model hsb-16 Binding form 2 over 2 Braiding direction vertical 0-150 rpm Braiding pitch 3.2-32.5mm 6.4-65mm Max. Braiding dia. 14mm Max. Braiding speed 585m/h Take-up and pay-off ¡¡¡ì|400¡«¡¡¡ì|800 Main motor 2.2kw Configuration size 1200mm¡¡¡ì¡¨¦1390mm¡¡¡ì¡¨¦2350mm Net weight 960kg According to customers`request
Model Hsb-16 16 Bobbin size ¡¨¦80¡¨¢¡¨¦22¡¨¢¡¨¦80mm ¡¨¦75¡¨¢¡¨¦22¡¨¢¡¨¦70mm Bobbin speed 0-150 rpm Braiding pitch 3.2-32.5mm 6.4-65mm Max. Braiding dia. 14mm Max. Braiding speed 585m/h Take-up and pay-off ¡¨¦400¡«¡¨¦800 Main motor 2.2kw Configuration size 1200mm¡¨¢1390mm¡¨¢2350mm Net weight 960kg According to guest`s request
High ribbed formwork is manufactured from hot-dipped galvanized steel sheets. Because its meshes and u patterns, it has better a High ribbed formwork is manufactured from hot-dipped galvanized steel sheets. Because its meshes and u patterns, it has better a
Pg7 pg9 pg11 pg13.5 pg16 pg19 pg21 pg29 pg36 pg42 pg48 pg63 m12*1.5 m16*1.5 m18*1.5 m20*1.5 m24*1.5 m25*1.5 m27*1.5 m32*1.5 m36*1.5 m40*1.5 m50*1.5 m63*1.5. 10/20/50/100 pieces per poly bag, export standard paper carton or custom design.
Reinforcing Welded Wire Mesh 1.Reinforcing mesh Material: 1)Cold-rolled steel ribbed rebar 2)Cold-rolled steel round rebar 3)Hot-rolled steel ribbed rebar 2.Reinforcing mesh Wire diameter: 5mm to 16mm. 3.Reinforcing mesh Opening: 75mm to 300mm. 4.Panel length: 100cm to 1400cm. 5.Panel width: 100cm to 300cm. 6.Features: Steel bar grating costs less time and labor in work. It saves about 50 to 70 percent work time compared with common binding wire mesh. The use of bar grating can also strengthen the concrete parts to reduce surface breaking ratio. Welded bar grating for reinforcement is especially suitable for big area concrete engineering. Using of welded bar reinforcement can save about 10 percent of the total cost of the project. 7.Applications: Welded steel bar panels are widely used in construction reinforcemet,the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Reinforcing mesh panel size is 2.4 x 6m (for Australia standard),including SL52-SL102 reinforcing mesh and trench mesh. Other specifictions also could be customized. Reinforcing Fabric BS 4483 standard, sheet 4.8mx2.4m -
Hexagonal Wire Mesh 1. Material: ·galvanized wire ·pvc coated wire ·stainless steel wire. 2. Wire diameter: ·0.2mm-4mm 3. Apreture: ·1/2inch-4inch 4. Size: ·the width of hexagonal wire mesh is 0.5m-2m; ·the length of hexagonal wire mesh is 10m-50m. 5. Packing: ·water proof paper only ·water proof paper inside, plastic film outside. 6. common size: 0.71mmx1"x1x30m .71mmx3/4"x1x30m -
GALVANIZED WIRE The product specification: 1.Material: Low Carbon Steel Wire 2.Wire Diameter: 0.10mm-5.0mm; 3.Processing: Wire Drawing, Acid Washing and Rust Removing, Annealing and Coiling. 4.Features: The zinc coating for hot-dipped galvanized wire is from 40g/m^2 - 300g/m^2 electro galvanized wire is from 8g/m^2 - 15g/m^2. 5.Tensile Strength: 350-550N/mm^2 6.Elongation: 8%-15% 7.Application: construction handicrafts, woven wire mesh, fencing mesh, packaging of products, daily uses. Packing & Shipping : 1.Packing: Coil and Spool,1- 1000kg/coil. Inside with plastic film and outside with woven bag,inside with plastic film and outside with hessian bag 2.Shipping: 20 days or according to your requirement FAQ: 1. Destination Port: Tianjin, China 2. Delivery Date: within 20 days after receiving the deposit for one 20'GP 3. Payment Term: L/C, T/T -
Cable accessories such as cable gland, cold terminal joints (terminals).
Ferro alloy cored wire.
6-35kv CCV line, 132KV CCV line, 500KV VCV line, Power Cable Equipment.
Cable drum.
Cable equipment.
Fiber optic cable, fiber optic patch cord, telecommunication cable, FTTH project products.
Medical cable, extrusion, cable, wire, connector, cable assembly, wire harness, pvc, hdpe, pp, ldpe, pcb, pcba, injection mold, injection molding, fixture, machining part, stamping part, tube, catheter, wire harness, release paper, release liner, flim, tape, silicone foam, sponge.Export and shipping
cable tray, HDT50,50mm height and HDT100 100mm height cable tray with return flanges on the sides to avoid damage to cables .A comprehensive range of accessories and specialized fittings fully complements our cable tray ranges. Cable trays feature slot patterns allowing for optimal and efficient positioning of equipment and easy access for cable ties and other fixings.
