M/m tio2 content%í² 94
Tint reducing power european unit í² 180
Whiteness % í² 97.0
Dispersibility mí 12
Oil absorptiong/100g í 20
105moisture % í 0.75
Specific resistance +.Cm í² 9000
Solution in water % í 0.3
Residue(45m) í 0.01
Ph value 6.5-8.0
Volatile matter(105d)í² -
Introduction to the Product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Characteristics of the Product
HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc.
Technical Index
Model: HTTi-01
Appearance: White powder
Content of titanium oxide (%): 99
Average of the grain size (nm): 10
Specific surface area (m2/g): 150
Crystal /surface treatment by: anatase
Characteristics: large specific surface, high photocatalytic activity
Model: HTTi-01-W
Appearance: White powder
Content of titanium oxide (%): 94
Average of the grain size (nm): 10
Specific surface area (m2/g): 100
Crystal /surface treatment by: anatase
Characteristics: highest photocatalytic activity
Introduction to the product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Characteristics of the product
Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics.
Technical index
Model: htti-03-h
Appearance: white powder
Content of titanium oxide (%): 88
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, hydrophilicity
Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray
Model: htti-04-h
Appearance: white powder
Content of titanium oxide (%): 85
Average of the grain size (nm): 30
Specific surface area (m2/g): 100
Crystal /surface treatment by: especially for cosmetics, lipophilicity
Characteristics:idem
Type: SHMP 68% Tech Garde
Properties: White powder, density is 2.484 (20C), easily soluble in water, but not in organic solution, absorbent to dampness, and turn sticky when absorbed dampness in air. It is possible to form solvent compound with metallic ions such as Ca, Ba, Mg, Cu and Fe; It is a fine agent for water treatment.
Caustic soda flake 99%
Other name: sodium hydroxide flake, naoh, sodium hydroxide flake
1. Description:
Molecular formular: naoh,
Cas no 1310-73-2
Formula naoh
Molecular weight 40.01 g/mol
Appearance white flakes
Melting point 596 k (318.4)
Relative density 2.1103kg/m3(as stp)
Solubility 111 g/100 g in water
2. Packing: 25kg or 50kg/bag, also can according to customers's requirements/as buyers request.
3. Advantage:
Caustic soda is our strong item, we can supply caustic soda /naoh at lower price and best quality.
4. Application:
Baisc chemical raw material, widely used in chemical industry
1). Used in water softening, in the soap and refined oil line, refining petroleum products, sanitation, hygiene and production chemicals.
2). Used as acidity regulator, alkali, impregnant's pigment in food and drug industry
3). Used as a raw material in the manufacturing of soaps, detergents, textiles and paper.
5. Specification
Naoh: 99.0%min
Na2 co3: 0.5%max
Nacl: 0.03%max
Fe2 o3: 0.005%max
Caustic soda Naoh Na2co3 Nacl Fe2o3
99% flakes 99.38%min 0.5%max 0.03%max 0.005%max
98%flakes 98.65%min 0.7%max 0.92%max 0.007%max
96%flakes 96.68%min 1.2%max 2.5%max 0.008%max
99%solid 99.30%min 0.5%max 0.03max 0.005%max
99%pearls 99.35%min 0.5%max 0.03%max 0.005%max
Caustic soda flake 99%min
Molecular formula: naoh
Molecular weight: 40
Cas no.: 1310-73-2
Hs code: 28151100
Specification:
Naoh----------------99%
Nacl--------------0.1% max
Na2co3----------0.08% max
Fe2o3-----------0.001% max
Package: in 25kg poly woven bags
Property: white pearls with strong corrosiveness, easily soluble in water, presenting alkaline solution and heat liberation, presenting deliquescence when exposed to air.
Use: basic and important chemical feed. Used as textiles industry, printing, detergent, paper-making, soap-makinmetallurgy, glassenamel, medicament, oil-refining and making synthetic fiber, plastics, and many kinds of organic-mediacy, etc.
Calcium chloride 77% min
Molecular formula: cacl2
Cas no.: 10043-52-4
Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, it is widely used in snow & ice melting, dust control, oil & gas drilling, moisture-absorbing, etc.
According to the content of crystal water in calcium chloride:
(1). Calcium chloride dihydrate
A. Calcium chloride flake dihydrate 74%min; 77%min;
B. Calcium chloride granule/pellet dihydrate 74%min; 77%min
(2). Calcium chloride anhydrous
A. Calcium chloride powder anhydrous 94% min
B. Calcium chloride pellets anhydrous 94%-97% min
According to grade:
(1). Calcium chloride industrial grade
(2). Calcium chloride food grade
Items Specifications Test results
Calcium chloride (cacl2) 77% min 78.54%
Megnisium and alkali metals chloride as nacl 5.0% max 2.83%
Sulfate (as so4) 0.2% max 0.043%
Insoluble matter in water 0.2% max 0.08%
Magnesium chloride as mgcl2 0.5% max 0.05%
Alkalinity as ca(oh)2 0.4% max 0.12%
Calcium chlorid
Molecular formula cacl. 2h2o
Use pharmaceutical purpose
Storage condition store in a welllight -closed container, protected from
Characters white, crystalline, powder
Molecular weight 110.99
Purity 74%min, 77%min, 94%min
Place of origin shandong china
Brand name dx
Minimum order quantity: 20 ton
Packaging details: 25kg/bag 25kg/drum 20kg/carton.
Delivery time: sight. Within one week in receipt of deposit or l/c at
Payment terms: l/c, t/t
Supply ability: 10000 metric ton per year
Pharmaceutical, injection, food grade.
Standard: cp2005 bp2009 usp31 ep5
Packing: 25kg/bag 25kg/drum 20kg/carton
We can supply the products of different grade.
Parameter
Specification
Result
Characters
A white, crystalline powder, hygroscopic, freely soluble in water-soluble in alcohol
Confirmed
Identification
It gives reaction of chlorides and calcium
Confirmed
Ph
5.5-7.5
Confirmed
Barium
Comply with the standard
Confirmed
Sulfates
ín300 ppm
300 ppm
Aluminum
Comply with the standard
Confirmed
Heavy metals
ín20 ppm
20 ppm
Magnesium and alkali metals
ín1.0%
1.0%
Iron
Comply with the standard
Confirmed
Organic volatile impurities
Comply with the standard
Confirmed
Type: STPP 94%min Tech Grade
Properties: White powder, surface density: 0.35-0.9g/cm3, melting point: 622C, free soluble in water, aqueous solution appears acid. It is a kind of inorganic surface active agent.
Property: Titanium dioxide pigment (TiO2) is a white powder with high opacity, brilliant whiteness, excellent covering power and resistance to colour change.
Application: Paint & coating, rubber, printing inks, plastics, rubber, paper making and leather industries etc.
Productú¦caustic soda / sodium hydroxide
Cas no.: 1310-73-2
Molecular formula: naoh
Properties: colorless crystaline with the shape of flakesú¼solid and pearls íú
Specifications:
It is the main raw materials for the production of soap; in the papermaking industry, it can dissolve the impurity of the wood pulp, so that the pure fibre can be available the papermaking; in textile industry it can be used in the production of the fabric ;in oil refining industry, it is used to remove the acids in the oil and improve the smell and color of the oil & petroleum products .
Application: mainly used in paper making, soap making, textiles, printing & dyeing, chemical fiber, pesticides, petro-chemical, medical and food industries.
Titanium Dioxide Rutile Type (Chlorination Process)
Content% ---------------------------------------------- 93Min
Tint Redusing Power% ---------------------------- 100 Min
Oil Absorption (g/<100g>) ------------------------- 22 Max
pH value ------------------------------------------------ 6.5-8.0
45 um SieveResidue %---------------------------- 0.1Max
Water-soluble Matter% ----------------------------- 0.3Max
Rutile Content% ------------------------------------- 98Min
Appearance: White Powder
Packing: 25kgs net bag, 22mts in the 20'FCL
Usage: It is widely used in the industries of aqueous and solvent-based paints, electro-deposition paints, coating, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics, ceramic, etc.
Please check the spec. As follows :
Titanium dioxide anatase type
Tio2 98%min
Volatile content 0.4%max
Water soluble matter 0.5%max
Oil absorption 26%max
Suspension ph 6.5 to 8.0
Titanium dioxide rutile type
Tio2 93%min
Water soluble matter 0.3%max
Oil absorption 22%max
Suspension ph 6.5 to 8.0
45umsieve residue 0.1%
Chemical formula: tio2
Appearance: white powder
Packing: 25kgs net bag, 22mts in the 20í»fcl
Usage: it is widely used in the industries of aqueous and solvent-based paints, electro-deposition paints, coating, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics, ceramic, etc.
We can provide sample if required .
