ntroduction:
Ethoxylated hydrogenated castor oil (PEG-40 hydrogenated castor oil) is a combination of synthetic polyethylene glycol (PEG) with natural castor oil. Ethoxylated hydrogenated castor oil can be used to emulsify and solubilize oil-in-water (o/w) emulsions.
Application:
Hydrogenated castor oil plays the role of thickening, hardening and sustained release in preparations, so it is used as a thickener, hardener and sustained release agent for the preparation of semi-solid preparations and solid preparations, such as ointments, suppositories, pills, tablets, etc. In ointments, creams and suppositories, it is mainly used as a hardener of the paste to adjust the consistency of the preparation; in oral preparations, it is mainly used to prepare sustained-release tablets and capsules, and can be used as a coating film or to form a solid skeleton to play a role in sustained or controlled release; it can also be used as a lubricant for tablets and capsules to improve the fluidity of particles.
13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Shield tail grease is a uniform paste made with grease as the main agent and adding fiber, tackifier, filler and other additives. It mainly plays the functions of sealing, waterproofing, lubrication and anti-corrosion. Shield tail grease is divided into two types: hand-applied grease and pumped grease. Hand-applied grease is used during the launch, and pumped grease is used during the propulsion process.
Application:
1. Good adhesion;
2. Good water resistance;
3. Good water tightness;
4. It has good pumpability in a wide temperature range.
We understand the demands of crankcase lubrication; the importance of water tolerance, of long-term bearing life, and protecting against corrosion. Bio Mileager Crank Case Oils offers protection against corrosion and wear, and the same load-bearing capabilities regardless of your geographic location.
Bio Mileager Crank Case Oil Additives are 100% herbal additives which really determine its performance properties. Bio Mileager Crank Case Oil Additives extend the viscosity range of the oil, allow it to withstand high pressures and loads, handle contaminants in the crankcase, and reduce friction for improved fuel economy.
Reduced soot and coke creation in the combustor.
Sustained engine power levels.
Reduced coke buildup on fuel nozzle face.
Extended fuel-nozzle cleaning intervals.
Reduced generation of smoke and particulates.
Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Roll blank is cast by imported centrifugal compound casting equipment. High Ni Cr Mo alloy is adopted, the thickness of the alloy layer is large and even 30-35mm, and the hardness is up to Hs78-80. Through shaft cold assembly technology or half shaft end cover forging shaft head is adopted, which can be processed and manufactured according to the requirements of different models of users. It has been used by many imported rolling mills, and various technical indexes have reached or exceeded foreign standards.
Steam turbine high temperature sealing grease MFZ-2 is a specific product for power plants from Dongfang Yoyik. The company is located in the industry city of southwest China, Deyang. We provide spare parts of DC power units, including valves, bearings, servo valves, filters, EH pumps, adhesive, O rings and many other components and replacements. We also offer products of EATON/PARKER, MOOG, Vickers, PALL and so on.
Yoyik offers different valves and pumps for power plants, and other spare parts for steam turbine, turbine generator, boilers as follow:
slot wedge & strip assembly 2Q2939
EH Oil Outlet filter HC9100FCZ8Z
turbine AST solenoid valve HQ16.81Z
bladder B2320D-581000C
Steam Turbine Actuator Servo Valve WZK.W.01.J.0698
Pressure Switch RC0450CZ089H
Strainer D600B-265200A
Pressure Switch 0.03-0.6Mpa Explosion-proof: EXEDIIT4-T6 851580801
spiral wound gasket D600B-296000A002
Filter of Sealing Oil Outlet Filtration AR4-8
cellulose filter HY-1-001HTCC
ADJUSTING WASHER M181.231.075
sealant injector 3Q3358-9
actuator filter B156.33.42.08
EH oil pump discharge working filter V6021V4C03
epoxy anti-coronaLaminate plate wedge strip 9332
SPECIAL STUD D350B-021000A002
EARTH ELECTRICAL BRUSH C1NQ.252.166
filter QF2260BG10XC
servo valve SF-21
600MW turbine AC Auxiliary oil pump (TOP)impeller 125LY-36
Pressure Switch RC861CZ090HY908
LVDT Position Sensor ZDET-300A
Bimetal Thermometer WSS-401-C
Fluoro Rubber O-Ring OR0311638
wet solenoid directional valve 4WE6X/SG24NZ5L
stainless steel filter SFX-660*40
EH oil main pump discharge filter (working)/EH pump filter/pump discharge filter/EH pump working filter W.38.C.0129
diatomite filter ZS.1100B-002
wear-resistant steel ceramic tube
sealing grease MFZ-2
precision filter WU6300*400
TSI Preamplifier CON021/916-100
vacuum oil tank float valve DN80 BYF-80
insertion element F3-CV1-16-D105-L-40
nut GB/T6175-2000
EH oil regeneration filter HPU-V100A
stator cooling water coupling DFB125-80-250
TiteSealHydrogen sealing Sealant T20-75
globe throttle check valve KJC50C-4.0P
stator cooling water pump DFB125-80-260
epoxy RTV adhesive HEC-51106
vacuum oil pump filter HS74499
sealant injector KH32/3Q3358-9
Pressure Gauge Y-60ZT
bellows globe valve (flange) 50FWJ1.6P
Bolt Heater HY-GYY-1.2-380V/3
Hex Cylindrical Screw M237-265000A017
GASKET D135A-261000A019
solenoid relief valve ECT5-10F-08-M-U-H5-30TB
Brush NCC634 32*32*64
Sensor DET-300B
solenoid valve 300AA00126A
Supporting Board 162YR41-16
Power Source for Hot Spot HSDS-20/D
bellows relief valve BXF-40II
Probe CWY-DO-813505
Hold Down Ring D150C-261000A008
Thermal Expansion Sensor TD-2
lock nut JB/T1700-2008
Solenoid valve DH1-0631/2 220VDC
sealing grease MFZ-2
[DFMY-2019-9-16]
Germany Pressol 500cc Grease Gun
The quick details of the germany pressol grease gun
Quick Details Type:Hand Grease Gun Max. Pressure:7000-10000 psi
Place of Origin:China (Mainland) Model Number:NA-839
Cartridge loading:14oz Bulk loading:400cc
G.W: 14KG N.W:13KGHead
Cap:Zinc alloy die / Aluminum alloy die Cartridge loading: 14oz
Bulk loading: 400cc Container tube size: 56x1x280mm
Finish: Oven painting. Could be silver gray, red, black, and so on
Supply AbilitySupply Ability:120000 Piece/Pieces per Month
Packaging & DeliveryPackaging DetailsColor box, White box, and plastic bag.
Port : Shanghai or NingboLead Time :30 days
Specifications
Grease gun, Germany type 14oz, 400cc, 7000-10000psi, 400-660bar (Optional) 6" steel hose, 12" flexible hose, standard couplerProduct
Description
Germany type grease gun Name of product Hand Grease Gun
Model number NA839 Capacity 400CC Pressure7000-10000Psi
Quantity 10PCS G/N.W 14/13 CTN size 40*39*28.5
Zinc alloy die cast head (Durable model) and Aluminum alloy die cast head (Economical model).Wide rolled thread design for fast and easy reloading.Soft rubber grip on lever handle for comfortable operation.
Type:Hand Grease Gun Max. Pressure:10000PSI
Size:400x390x285mm Place of Origin:Shandong, China (Mainland)
Warranty:12 Months Capacity:400cc
Pressure:10000PSI Head Cap:Aluminum Die Cast Cap
Packaging & Delivery
Packaging Details:
color packing and master carton
Port: Qingdao
Lead Time :
Shipped in 40 days after payment
Bio Mileager 4T Plus is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager 4T is premium quality multi-grade engine oil (SAE 20W40), formulated to meet the requirements of high performance 4 stroke two and three wheelers. It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.
Bio Mileager Kerosene Lubricity Additive is a herbal fuel additive which forma protective layer on metal surface to prevent wear and tear. It improves the equipment life.
Bio Mileager MP3 Grease Oil Additive is a MULTI-PURPOSE GREASE MP3 of premium quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance. specifications. This grease provides maximum protection by adhering well to the lubricated bearing surfaces sealing them from dirt and abrasive contaminations
Bio Mileager WB Grease It is made from herbal , refined & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odour and visible impurities.
Bio Mileager Chasis Grease additive is made from herbal soap, refined & filtered mineral lubricating oils, suitable pacifier etc. The grease is smooth, homogeneous, free from objectionable odour and visible impurities and abrasive of deleterious particles.
