Our spent activated carbon original application was in the water filtration for F&B applications. They are derived from coconut shell and are shaped into extruded cylinder blocks of various dimensions. We are looking to sell our stock to clients interested in the following applications: Reactivation services Use as an alternative fuel Other sustainable applications Quick Details Place of Origin: Singapore Type: Extruded Blocks Usage: Water Treatment Chemicals Supply Ability Supply Ability: 150 to 200tons Packaging & Delivery Packaging Details: PP Jumbo Bags (300kg per bag) Port: Singapore Product Name: Activated carbon Product Type: Derived from coconut shell and extruded into cylindrical blocks. Product Usage: Activated carbon is used in purifying water and air Product Spec: Iodine Number (MG/G): min 1,000 CTC(%): min 50 bet surface area(M2/G): 1050 ash(%): 4 hardness(%): 98 Apparent density(KG/M3): 540 moisture(%): 5
Activated Alumina FOR H2O2 PRODUCTION
One step single solution desensitizer which provides quick and easy chair side solution to sensitivity caused by open tubules, bacteria and micro leakage. It is applied in one step with a brush. Itâ??s HEMA based composition is soft tissue friendly and provides immediate relief from dentinal hypersensitivity
We offer carbon black type N115 and N220
Specification: Biochar is a carbon-rich product made from renewable agricultural waste residue like coconut shells, corn cobs, cotton stalk, coconut husk, fronds, bagasse etc. It is produced by pyrolysis (heating in the absence of oxygen) that acts as a sustainable and permanent soil amendment. Research findings and experience on the field show that there is an increase in crop yields by using Biochar Soil amendment. It is a soil amendment that is plowed-in only once and has a lasting effect for centuries. Biochar enhances soil fertility by stimulating biological activity, improving soil nutrient and water retention, and also increasing organic matter. It is completely sustainable as the biomass comes from readily available and sustainable agricultural waste. Furthermore, the carbon in the biochar becomes locked up in the soil, removing carbon from the atmosphere. The main scientifically approved reasons that biochar amendments have resulted in measurable improvements in soil productivity are that it: Enhances soil biology (40% increase in mycorrhizal fungi) Improves nutrient retention in soils (50% increase in Cation Exchange Capacity) Improves the water retention capacity of soils (up to 18% increase) Increases the pH of acidic soils (1 point pH increase) Increases soil organic matter
As a performance comparison between N330 and DCB330, the technical performance has been seen higher in partial replacement than the conventional 100% virgin carbon black compounds. Majestiqueâ??s DCB330 passes through vigorous multi-stage, extreme high-temperature mineral and chemical infusion process followed by pelletizing and packaging. This key technology process provides us the leading edge over the traditionally-produced carbon blacks. Our innovative technology has transformed the end of life tyres into spectacular green carbon black products. We guarantee that our DCB330 is as good as the highest quality carbon black available in the market, and in certain cases, Majestiqueâ??s DCB330 is superior to the rest. ICB550 has been designed with superior technology to not only retain these properties of N550 but also improve the rolling resistance while maintaining traction. It is imperative to assert the importance of Green Carbon Black in the Tyre and Non-Tyre Rubber applications with respect to its suitability in mechanical and dynamic properties without being compromised. It is the most comprehensive way in partially replacing N330, N550 and N660 grades of Virgin Carbon Black in Technical Rubber Applications providing consistent and comparable tear strength and hardness to the characteristics of the products.The synergistic value in blending the carbon grades is promising and cost-effective. Majestique believes in the power of simplicity for using our product, therefore our carbon blacks are available in a variety of grades and tailored to the specific requirement of your business. Our products are available in Fluffy and Pellets forms, are non- toxic and have a lower PAH than all traditional carbon blacks, making them safe for the environment. Like N660, MCB660 has high tensile stress, good processing performance, high rebounding performance and high flexibility. This industrial-quality black is suitable for various vulcanization. Compared to semi-reinforcement blacks, MCB660 has higher structure, smaller particle size, higher tensile strain at break, lower heat-up, excellent elasticity and fatigue properties, which make it suitable for fabric cord of tyre, inner tyre, bicycle tyre, hose, belt, cable, shoes, extrusion compounds and rolling compounds.
Our spent activated carbon original application was in the water filtration for F&B applications. They are derived from coconut shell and are shaped into extruded cylinder blocks of various dimensions. We are looking to sell our stock to clients interested in the following applications: Reactivation services Use as an alternative fuel Other sustainable applications Quick Details Place of Origin: Singapore Type: Extruded Blocks Usage: Water Treatment Chemicals Supply Ability Supply Ability: 150 to 200tons Packaging & Delivery Packaging Details: PP Jumbo Bags (300kg per bag) Port: Singapore Product Name: Activated carbon Product Type: Derived from coconut shell and extruded into cylindrical blocks. Product Usage: Activated carbon is used in purifying water and air Product Spec: Iodine Number (MG/G): min 1,000 CTC(%): min 50 bet surface area(M2/G): 1050 ash(%): 4 hardness(%): 98 Apparent density(KG/M3): 540 moisture(%): 5
Fixed Carbon: 99.9% Size: +50mesh Expansion Rate: 200
Technical specifications available on request. Buyer or buyer's representative to fill in a "requirements form" and on the basis of this a "SCO" will be provided. Price is dependent upon quantity.
Activated carbon is used to purify liquids and gases in a variety of applications, including municipal drinking water, food and beverage processing, odor removal, industrial pollution control. Activated carbon is produced from carbonaceous source materials, such as coconuts, nutshells, coal, peat and wood.
Send us your specification and we will quote accordingly. Our standard specification: Iodine between 1000-1100 Particle size: -30 or -60 Price $1350
Products +194 Fixed Carbon (MIN) 94% Ash (MAX) 5.0% Volatile (MAX) 1.0% Particle Size Min75% â?¥ 100mesh
Products +3299 Fixed Carbon (MIN) 99% Ash (MAX) 0.8% Volatile (MAX) 0.2% Particle Size Min75% â?¥+32mesh
Carbon steel pipe fittings, made according to ASME B16.11 ( 2000LB, 3000LB 6000LB ) standard. Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized. supply to international market for over fifteen years.
Carbon steel pipe fittings, made according to EN 10241 ( BS EN 10241 / BS 1740 ) standard. Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized. supply to international market for over fifteen years. This European Standard specifies requirements for threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas
Carbon Block Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length : 9 3/4", 9 7/8", 10" (Most Common for Residential) , 20" (Most Common For Commercial), 30", 40" (Most Common For Industrial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Coconut Shell Activated Carbon Iodine 1000 with FDA Compliance polymer Bonding Outer Finish : Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10", 20" : 25pcs/Ctn 30", 40" : 20pcs/Ctn Container 20GP / 40GP / 40HQ Ordering Code : CTO-AA AA : Inch
Granulated Activated Carbon Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length :10" (Most Common for Residential) , 20" (Most Common For Commercial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Activated Carbon Coconut Shell Iodine 1000 and Up Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10" : 50pcs/Carton 20", 30", 40" : 25pcs/Carton Container 20GP / 40GP / 40HQ Ordering Code : GAC-AAXXXX AA : Inch XX : Iodine Number 800/1000
Activated Carbon Coconut Shell for Gold Mining, Water Purification and other Application Usage Specification : Mesh : 6x12, 8x30, 12x40, 30x60 Iodine Number : 600 - 1200 1 Sack = 25kg Customize Sack is available Container 20GP / 40GP / 40HQ Ordering Code : AC-XXXYYYY AC : Activated Carbon XXX : Mesh YYYY : Iodine Number 600-1200 Contact Person : Karl Steven +62 811 923 00 33 WhatsApp / WeChat Available
conductive carbon inside light grey polyester fiber filaments ESD gloves 20D/3F dyeable anti static a) cross section: three dots type. cross-section.jpg b) conductive materials: carbon grains. c) surface resistance: 10^6 ohm. d) thickness: 20D e) filament(s):3F Also could supply 20D/3F, 20D/4F, 40D/3F, 40D/6F, 100D/12F, etc. Denier/Filament(s) Based Materials Conductive grains Cross section Color Surface resistance 20D/1F Nylon 6 Carbon outer ring type.jpg Black 10^4~10^5 ohm 20D/3F Nylon 6 Carbon outer ring type.jpg Black 10^4~10^5 ohm 40D/3F Nylon 6 Carbon outer inner type.jpg Black 10^4~10^5 ohm 40D/6F Nylon 6 Carbon outer inner type.jpg Black 10^4~10^5 ohm 20D/3F Nylon 6 Metal oxide / White 10^8 ohm 20D/3F Nylon 6 Carbon LR.jpg Black 10^5~10^6 ohm 20D/4F Polyester Carbon LR.jpg Black 10^6 ~ 10^7 ohm 50D/8F Polyester Carton cross-section.jpg Black 10^6 ~ 10^7 ohm 20D/3F Polyester Carbon cross-section.jpg light grey 10^6 ohm Application: Embeded this conductive filaments into the fabric of anti-static work wear and cleanroom garments by regular grd/stripe , this fabric could electro static discharge . * Dustless fabric * linings of top grade suit * Anti-static kniting gloves * Anti-static fabrics * Anti-static single yarn drill and ply-yarn drill * Anti-static filter felt . Packaging & Shipping 500-800grams/bobbin, is not even net weight. 16 or 24 bobbins/carton Could ship by international express or by general air transportation or by sea. t3.jpg Our Services If less than 100kg, could send out within 7 days approx. If more than 1000kg, could finish them within 26 days approx.. Company Information We produced this types of products more than 15 years, it is best-selling goods in EU, Turkey, India, USA, Argentina, Brazil, etc. FAQ a) If export to Turkey, could supply Exporter Registry Form and Certificate of origin? Yes, we exported this products to Turkey more than 10 years, very familiar with Turkey's market. b) Could use this filaments for knitting/weaving directly? No, should intermingle/twist/cover with common polyester filaments FDY(DTY) black(white) 50D/75D/100D/150D/200D/280D in advance, then, could be used for weaving/knitting. Of course, also could twist/cover with cotton yarn/polyester staple fiber spun yarn, then, used for weaving/knitting.
Application: Embeded this conductive filaments into the fabric of anti-static work wear and cleanroom garments by regular grd/stripe , this fabric could electro static discharge . * Dustless fabric * linings of top grade suit * Anti-static kniting gloves * Anti-static fabrics * Anti-static single yarn drill and ply-yarn drill * Anti-static filter felt . Packaging & Shipping 500-800grams/bobbin, is not even net weight. 16 or 24 bobbins/carton Could ship by international express or by general air transportation or by sea. t3.jpg Our Services If less than 100kg, could send out within 7 days approx. If more than 1000kg, could finish them within 26 days approx.. Company Information We produced this types of products more than 15 years, it is best-selling goods in EU, Turkey, India, USA, Argentina, Brazil, etc. FAQ a) If export to Turkey, could supply Exporter Registry Form and Certificate of origin? Yes, we exported this products to Turkey more than 10 years, very familiar with Turkey's market. b) Could use this filaments for knitting/weaving directly? No, should intermingle/twist/cover with common polyester filaments FDY(DTY) black(white) 50D/75D/100D/150D/200D/280D in advance, then, could be used for weaving/knitting. Of course, also could twist/cover with cotton yarn/polyester staple fiber spun yarn, then, used for weaving/knitting. Such as: Black carbon inside conductive nylon filaments 20D/3F(ourter ring type) intermingling with common black(white) polyester DTY(FDY) filaments 50D/75D/100D/150D/200D Black carbon inside conductive nylon filaments 20D/3F(ourter ring type) twisting with common black(white) polyester DTY(FDY) filaments 50D/75D/100D/150D/200D Use black carbon inside conductive nylon filaments 20D/3F(ourter ring type) cover common black(white) polyester DTY(FDY) filaments 50D/75D/100D/150D/200D by S direction only. Use black carbon inside conductive nylon filaments 20D/3F(ourter ring type) cover common black(white) polyester DTY(FDY) filaments 50D/75D/100D/150D/200D by S direction and Z direction concurrently.