Technical Specifications: Sloped Grid Screen Dimension: 3.5x1.5 m / 2 Decks Diesel Driven Generator Remote Controlled Hydraulic Tilting Grid Control Panel Remote Controlled Belt Conveyor with Horizontal Movement (Hydraulic Stroke 1 mt.) Remote Controlled Machine Inclination Adjustment Crawler Set with Towing Eye.
These professional machines are generally used for taking out sand and rubble from lake, pond, river and sea. And also they are used for cleaning lake, and getting wet clay from dams. These machines are manufactured in the light of superior German technology. The diving depth of the machines is ranging up to 100 meters according to the model type. Bridge columns attached to the pontoon and the grab mounted below the crane are the main components of the system. The working principle of the system; The grab diving into water with open mouth reaches the bottom of water and closes by rope to get material. Then grab is pulled up with rope drum. Water filled in the grab is waited to flow through the slots and the grab releases the material in hopper. Coarse material is separated from hopper grid and the material passing through the grid is being pre-screened before being transferred to land by belt conveyors on pontoon. TYPE TECHNIC Grab Capacity Grab Grab Volume (At 20 m. Diving Diving diving depth) Depth Drive KAK 140 4.2 m3 180 m3/h 45 m 170 kW KAK 180 5.5 m3 210 m3/h 50 m 240 kW KAK 220 6.0 m3 320 m3/h 80 m 300 kW KAK 240 6.8 m3 360 m3/h 80 m 300 kW KAK 300 8.0 m3 410 m3/h 80 m 400 kW KAK 360 10.0 m3 480 m3/h 100 m 520 kW KAK 400 12.0 m3 530 m3/h 100 m 625 kW
TYPE Bucket Volume Capacity Diving Depth Bucket Drive E2-L 80 liters 170 tons/h 6 m 30 kW E3-L 125 liters 250 tons/h 8 m 45 kW E4-L 175 liters 370 tons/h 10 m 55 kW
Technical Specifications: Hopper Volume: 2.5 m3 Main Belt Width: 800 mm Drum Diameter and Length: 1.5 m/4.0 m Capacity: max 40 m3/h Control Panel Diesel Driven Generator 20 kVA 2 Units of Mechanic Collapsible Belt Conveyor Chassis: Tandem Axle, Air Brake, Taillights, Towing Eye It can be towed up to speed of 80 km/h on highway.
Technical Specifications: Hopper Volume: 1.8 m3 Main Belt Width: 800 mm Drum Diameter and Length: 1.9 m/2.5 m Capacity: max 20 m3/h Control Panel Diesel Driven Generator 10 kVA 2 Units of Mechanic Collapsible Belt Conveyor Chassis: Tandem Axle, Air Brake, Taillights, Towing Eye It can be towed up to speed of 80 km/h on highway.
Four Bin Feeder : Hopper made from M.S. Plates of 5 mm thick and mounted on robust steel structure. Load cell system is mounted under the gathering belt for weighing the Aggregate and Synchronization with Asphalt percentage. Independent variable speed, synchronized drive under each bin with one feeder Vibrate system . No flow indication system provided under each bin.
Tadano TR160M-3 1998.2 X-type outrigger, STD JIB Boom :27.5m jib:3.5m Engine : Hino H07C-TF.
Brick style and output Product specification (L,W,H)(mm) Model number Per hour yield Produce period Standard brick 240*115*53 mm 32Piece 5760Piece 20Second/Time Hollow brick 390*190*190 mm 5Piece 900Piece 20Second/Time Multihole brick 240*115*90 mm 16Piece 2880Piece 20Second/Time. Main technical parameter: Ordinal number item Parameter 1 Actuating shock force 78KN 2 Frequency of shock 6500 Time/Minute 3 Amplitude 15mm 4 Noise 95db(A) 5 Shock time 6Second/Time 6 Overall dimension 6500,1900,2250(mm) 7 Installed capacity 24.2KW 8 Weight of complete machine 5T 9 Maximum pressure 10T 10 Give piank size 1100,570,20(mm) 11 Operation number 8(person). 12 Use a ground of area 4000 m.
Brick style and outputItem Production specification Model number Per hour yield Produce period 1. Standard brick 240*115*53mm 34piece 6120piece 20second/time 2. Bread brick 100*200*60 20piece 3600piece 20second/time 3. Hoolow brick 390*190*190 5piece 900piece 20second/time 4. Multihole brick 240*115*90 16piece 2880piece 20second/time 5. S shape brick 225*200*60 18piece 3240piece 20second/time Main technical parameter 1.Actuating shock force 78KN 2.Frequency of shock 5000time/minute 3.Amplitude 15mm 4.Noise 95db(A) 5.Shock time 6second/time 6.overall dimension 4300*2100*2500 7.Installed of complete machine 24.2KW 8.Weight of complete machine 6T 9.Maximum pressure 10T 10.Give plank size 1150*570*20mm 11.Operation number 8person 12.Use a ground of area 5000.
Brick style and outputItem production specification Model number Per hour yield Produce period 1.Standard brick 240*115*53mm 32piece 7680piece 15second/time 2.bread brick 100*200*60 18piece 4320piece 15second/time 3.Hoolow brick 390*190*190 5piece 1200piece 15second/time 4.Multihole brick 240*115*90 16piece 3840piece 15second/time Main technical parameter 1.Actuating shock force 78KN 2.Frequency of shock 6500time/minute 3.Amplitude 15mm 4.Noise 95db(A) 5.Shock time 6second/time 6.overall dimension 3200*2100*2600 7.Installed of complete machine 25.7KW 8.Weight of complete machine 6T 9.Maximum pressure 10T 10.Give plank size 1100*570*20mm 11.Operation number 6person 12.Use a ground of area 5000.
Brick style and output Item production specification Model number Per hour yield Produce period 1.Standard brick 240*115*53mm 36piece 8640piece 15second/time 2.Hoolow brick 390*190*190 6piece 1440piece 15second/time 3.Multihole brick 240*115*90 18piece 4320piece 15second/time Main technical parameter 1.Actuating shock force 98KN 2.Frequency of shock 6500time/minute 3.Amplitude 15mm 4.Noise 95db(A) 5.Shock time 6second/time 6.overall dimension 4000*2300*2600 7.Installed of complete machine 26.4KW 8.Weight of complete machine 8T 9.Maximum pressure 10T 10.Give plank size 1250*570*25mm 11.Operation number 8person 12.Use a ground of area 5000.
Brick style and outputItem production specification Model number Per hour yield Produce period 1. Standard brick 240*115*53mm 51piece 12240piece 15second/time 2. Bread brick 100*200*60 18piece 3240piece 20second/time 3. Hoolow brick 390*190*190 10piece 2400piece 15second/time 4. Multihole brick 240*115*90 24piece 5760piece 15second/time Main technical parameter 1. Actuating shock force 98KN 2. Frequency of shock 6500time/minute 3. Amplitude 15mm 4. Noise 95db(A) 5. Shock time 6second/time 6. overall dimension 4000*2300*2700 7. Installed of complete machine 38KW 8. Weight of complete machine 12T 9. Maximum pressure 10T 10. Give plank size 1180*880*30mm 11. Operation number 12person 12. Use a ground of area 5000.
4KW, 360-400V,3P; Disc 400mm; N.W: 125KG; Water and Vacuum port; Height can be adjusted. Detailed Product Description: Ideal for 1, Smoothing rough surfaces or trowel marks; 2, Repairing damaged concrete slabs; 3, Removing epoxy thin-coats; 4, Grinding sharp grout, mastic, flint and granite; 5, Leveling and smoothing uneven surfaces. Performance 1, The height of handlebar can be adjusted; 2, Vacuum outlet and rubber skirt prevent dust from entering the machine; 3, Circuit breaker protects the machine from motor overload; 4, Mounting discs are connected by rubber pads, to avoid the slight vibration which is caused by wear of gear wheel; 5, Foldable hand makes transportation and storage easy and compact. Inside:high density polyethylene pallet outside: carton.
Ideal for 1, Smoothing rough surfaces or trowel marks; 2, Repairing damaged concrete slabs; 3, Removing epoxy thin-coats; 4, Grinding sharp grout, mastic, flint and granite; 5, Leveling and smoothing uneven surfaces. Performance 1, The height of handlebar can be adjusted; 2, Vacuum outlet and rubber skirt prevent dust from entering the machine; 3, Circuit breaker protects the machine from motor overload; 4, Mounting discs are connected by rubber pads, to avoid the slight vibration which is caused by wear of gear wheel; 5, Foldable hand makes transportation and storage easy and compact. High density polyethylene pallet conform to eport standard.
Plastering machine, mortar spraying pump for traditional plaster mix and for premixed materials also. Mix, pumps and spray. Diesel version and also electric 400V version available. Can pump up to over 30 mts height and 45 mts horizontal. Output capacity up to 60 lts/min. Can reach easily 300 m2 finished plaster per day with a team of 4 - 5 qualified people.
Floorscreed pump diesel version. Includes compressor. Also available an electric version (no compressor included) for pumping dry or semydry materials, sand, screed, etc.. To long distances or heights. Pumping capacity up to 150 mts height and also horizontal. Up to 6 m3 per hour.
RM3-TN1, RM3-TN6, RM3-TN7, RM3-TN9,RM3-T8, RM3-T10, RM3-TB13, RM3-TB15,RM3-22/BS13, RM3-22/BS18, RM3-22/B3, RM3-22/B7 One pallet 1300mm*900mm*800mm.
The characteristics of 4-20 Automatic Brick Making Machine 1.Brick Making Machinehas high speed, high capacity, strong structure, and high efficient. 2.The formed steel and special welding procedure of machine structure makes the machine not easy to sealing-off and break, and especially strong and durable. 3.The adoption of electromagnet electronic control technology of the head downlink could reach accurate impact affect, which can effectively improve the thickness of block as well as improving working speed. 4.The fan-cooled brake motor can get a good effect of quick brake, accurate location and not easy to burn the motor. 5.Brick Making Machine's structure. all of the moulds adopt CO2 protecting welding technique, which makes the machine structure more strong and durable, not easy to break, boom, and can get a longer using life.
Dimension : 2650×2200×2780mm Host machine power: 32 KW Moulding area: 800×600mm Vibration force: 45KN Moulding period:15-25S Mixer model: JS500 The size of the pallet: 850×750×20/25mm General water Consumption: 6T/ day Weight of machine: 8.7T Factory area: 200m2 1 Theoretical workshop area : 150m2 , need about 6-7workers. 2 the office , curing area and stacking area to arrange according your situation. Advanced techonlogy of Concrete cement brick machine QT4-15C Hydraulic pressure Various kinds of blocks: paver blocks, hollow blocks, solid blocks, porous blocks etc. Fully automatic concrete brick machine Configuration of QT4-15C: PLC, batching plant, JS500, belt conveyor, blocks receiver, pallet stacker, forklift, pallet conveyor, pigment mixer etc. High block density : Wtih PLC control. Nude pacing , the QT4-15C block making machine is about 9t . And the dimension of the machine is 2650*2200*2780mm.
Technical characteristics 1. This brick machine is feature of high-speed operation, low abrasion on the sealing of main cylinder, uneasy to damage or leak and low failure rate. 2. The hydraulic system of our brick machine is designed with double-way loop, which adopts professional combined valves to realize the working cycle of filling, air discharge, pressing and de-molding 3. The hydraulic oil tank of our Brick machine is designed with automatic oil heating and cooling systems and oil purification devices, which adopts repeated continuous filtering to ensure the optimal working conditions of hydraulic oil. 4. The feed hopper of our Brick machine is designed with stock level recorder, the open-close door cylinder realizes the automatic open-close of the door so as to ensure the feed averagely to the material box. 5. The cart of automatic material box of our Brick machine adopts positive feed pattern with forced mixing mechanism so as to ensure the average cloth and efficiency. 6. The front of automatic cloth cart is installed with automatic blank-taking device to convey the de-molded bricks to the service position or belt machines. 7. Our Brick machine adopts PLC Siemens controller and man-machine interface, and the whole machine can be operated automatically 8. The molds can be replaced for the production of standard bricks, blink-hole bricks and hollow bricks with different specifications. Main Technical parameters: Type: DYS850 Max work pressure(KN): 8500KN Max oil pressure in the hydraulic system (Mpa): 28.0Mpa Installed capacity(Kw): 74KW Quantity of solid bricks/time 240X115X53mm: 24pcs Quantity of hollow bricks/time 240X115X90mm (hollow rate:25%): 12pcs Automatic setting machine/time(standard brick): 48pcs/time Output/unit/h(based on solid bricks): 5400-5760pcs/h Annual output: 35-38 million purchase. International standard container.