Main parameters of DHB series asphalt mixing plant: * DHB-40 Drum Asphalt Mixing Plant 1.Production Capacity: 40t/h Under standard condition 2.Fuel Type: Coal or oil 3.Total Power: About 73.9KW Cyclone dust filter 4.Fuel Consumption: 5.5-7kg/t Fuel 5.Volume of Cold Aggregate Storage: 44m3 6.Discharge Temperature: 120-160 7.Drying Drum: 1200mm5000mm8.Control Mode: manual, semi-automatic, automatic. * DHB-60 Drum Asphalt Mixing Plant 1.Production Capacity: 60t/h Under standard condition 2.Fuel Type: Coal or oil 3.Total Power: About 118.7KW Cyclone dust filter 4.Fuel Consumption: 5.5-7kg/t Fuel 5.Volume of Cold Aggregate Storage: 44m3 6.Discharge Temperature: 120-160 7.Drying Drum: 1500mm6500mm 8.Control Mode: manual, semi-automatic, automatic.
Main Technical Performance and Parameters: Cycle Time(s) Pallet Size (mm) Power (kw) Weight (kg) Machine Specification (mm) 12¡ª18 1080x850x40 36.25 13800 7200x2290x2825 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400 200 200 10 2400 19200 Porous brick 240 115 90 24 5760 46080 Standard brick 240 115 53 48 11520 92160 Ground brick 200 100 60 31 5580 44640 1. Super-strong steel structure made of extensive imported original parts, ensuring more stability and reliability for the main machine body. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect. 3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life. 4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity. 5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.
Main Technical Performance and Parameters: Cycle Time (s) Pallet Size (mm) Power (kw) Weight (kg) Specification (mm) 12¡ª18 900x540x40 26.8 6800 6120x2240x2750 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400¡Á200¡Á200 4 960 7680 Porous brick 240¡Á115¡Á90 14 3360 26800 Standard brick 240¡Á115¡Á53 28 6720 53760 Ground brick 200¡Á100¡Á60 16 2880 23040. Reliability. The machine frame is made of super- strength steel and by special welding technology, the imported elements are applied widely, so that the stability and reliability of the machine in long term running are insured. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, fault diagnosis and parameters setting, ensure the best operation effect of the machine. 3. Unique design. The special loading and supply unit, the multi-line whipping forks are fixed at inside of material feed box. The whipping forks works and feed the material to mold box forcedly during the material feed box moves to up of mold box, the feed will smoothly and equalization, than for the product, the intensity is insured and the weight is equal. 4. Design with super strong vibrating activated force, The computer controls the pressure and flowing rate of hydraulic system; vertical synchrony-vibration; frequency conversion; brake, final the product reaches the high density and high strength within short time. 5. Multi use; strong performance; the many kind of products with difference form and size can be made when use the difference mold , such as wall block, honeycomb type block, road block and slope block.
Main Technical Performance and Parameters: Cycle Time(s) Pallet Size (mm) Power (kw) Weight (kg) Machine Specification (mm) 12¡ª18 1400x750x45 36.25 14600 10720x2620x2880 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400¡Á200¡Á200 9 2160 17280 Porous brick 240¡Á115¡Á90 25 6000 48000 Standard brick 240¡Á115¡Á53 55 13200 105600 Ground brick 200¡Á100¡Á60 36 6480 51840 1. Super-strong steel structure made of extensive imported original parts, ensuring more stability and reliability for the main machine body. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect. 3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life. 4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity. 5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.
Main Technical Performance and Parameters: Cycle Time (s) Pallet Size (mm) Power(kw) Weight (kg) Specification (mm) 12¡ª18 920x850x40 36.25 11800 7200x2100x2825 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400¡Á200¡Á200 8 1920 15360 Porous brick 240¡Á115¡Á90 21 5040 40320 Standard brick 240¡Á115¡Á53 42 10080 80640 Ground brick 200¡Á100¡Á60 28 5040 40320. 1. Super-strong steel structure made of extensive imported original parts, ensuring more stability and reliability for the main machine body. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect. 3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life. 4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity. 5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.
Main Technical Performance and Parameters: Cycle Time (s) Pallet Size (mm) Power (kw) Weight (kg) Specification (mm) 12¡ª18 850x680x40 29 8600 6670x2245x2780 Theoretical Output Table: Type Specification (mm) No./pallet Block/hour Block/8hours Hollow Block 400¡Á200¡Á200 6 1440 11520 Porous brick 240¡Á115¡Á90 15 3600 28800 Standard brick 240¡Á115¡Á53 30 7200 57600 Ground brick 200¡Á100¡Á60 21 3780 30240. 1. Force feed unit: The whipping fork works rapidly during the feed box moves to up of mold box, finally the equalization of material feed and the consistency of the products intensity are insured. 2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, fault diagnosis and parameters setting, ensure the best operation effect of the machine. 3. Enlarge the available area of the work table: The appliance of the advanced vibration technology causes the larger work table, it makes that the productivity is increased greatly. 4. Particular vibration type: The computer controls the pressure and flowing rate of hydraulic system; vertical synchrony-vibration; frequency conversion; brake. Transforming the over quantity of hydraulic oil to a vibrating activated force, thereby basically eliminating the energy waste. 5. Reasonable distributing of vibration: mold box fixes at the vibrating table via the cylinder of drawing mold, there is a special vibrator fitted on the pressure head. The combine vibration of the work table and mold increases the vibrating velocity and causes the concrete liquefy and exhaust quickly, final the product reaches the high density and high strength.
T130X Superfine Grinding Mill is mainly used in processing powder of mineral materials of metallurgy, building materials, chemical industry, mining, etc. It can grind non-flammable and non-explosive materials with moisture less than 6% such as Feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, slag, activated carbon, dolomite, granite, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U.S. sand, gold, red mud, clay, Kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, muddy green rock, leaf wax rock, shale, purple rock, Diego rock, basalt, gypsum, graphite, insulation material, etc. Equipments: The complete set of T130X grinding mill consists of mainframe, reducer, classifier, maintenance platform, blower, collector, electric controller, etc.And some auxiliary equipments such as jaw crusher, bucket elevator, electromagnetic vibration feeder and hopper, etc. Working Principal: Large materials are crushed by jaw crusher into required size for mainframe, then the crushed materials are elevated to the hopper by bucket elevator£¬then to the grinding chamber for grinding by vibrating feeder evenly and continuously. The powder goes upwards with the airflow, after separating by the classifier, those which can meet the fineness requirement enters into the collector through pipes for separating and collecting, and discharged from the discharged valve as finished products. The airflow is sucked into blower through wind recycling pipe at the upper part of cyclone power collector. And the closed airflow circulation system with negative pressure ensures the environmental health of production line site. Technical Date: 1) Mainframe parameters Item Unit Specifications &Technical data Quantity of roller pcs 4 Diameter of roller x Height mm 410x210 Diameter of ring x Height mm 1300x210 Rotation speed rmp 103 Max. feeding size mm
SCM series S super thin mill is also called Micronizer , Industrial Mill, Micron Grinding Mill ,Micron Grinding Mill £¬Ultrafine Mill, Micro Powder Mill which is a kind of Mill, Grinder, Grinding Mill, Milling Machine. On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power. SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals. Model : SCM6015 , SCM8021 , SCM10027 Roller number: 15, 21, 27 Diameter (mm) : ¦µ600, ¦µ800 , ¦µ1000 Ring number:1¡Á3,1¡Á3,1¡Á3 Main unit speed(mm):235,235,173 Max. feeding size(mm):10, 10, 20 Final size (mesh): 325-2500, 325-2500, 325-2500 Capacity (kg/h): 325-2500, 600-4000, 900-6800 Overall dimension (m): 10¡Á2.3¡Á5.5, 13¡Á3¡Á5.8, 18¡Á4¡Á8.6.
By the Vibrating feeder, the material will be fed evenly and continuously into the room of the Storage Bin to grind. In the production line, the Vibrating Feeder can evenly feed the crushing material, and complete the primary screening. Vibrating Feeder features its own superiorities: stationary vibration, reliable operation, long time service life. The vibrating force can be adjusted, and the flux can be randomly changed and controlled, very convenient to control. The vibration force is the source of vibrating motor. It is of low noise, low energy consumption, good performance. Vibrating feeder is of simplicity in structure, reliability in operation, convenience in adjustment, light in weight, small in size, convenience in maintenance. The dust contamination can be prevented when the closed structure is adopted. Model:GZD-180*80,GZD-200*120,GZD-300*90,ZSW-380*96,ZSW-420*110,ZSW-490*110,ZSW-490*130,ZSW-600*150. Capacity (t/h): 30-80,80-500,40-100,90-200,150-350,180-380,250-450,450-800,600-1000. Max.Feed Size(mm):300,300,300,500,580,580,750,800.
Sand Washing Machine is also called Sand Washer, Washing Machine, Wash Equipment, Sand Gravel Washer , Sand Cleaning Machine, Sand Washing Equipment, Sand Cleaning Equipment. XSD series High-efficient Sand Washing Machine, which is used for washing away the stone power and impurity in the sand made by the Sand Making Machine, to increase the sand quality, is a necessary equipment to wash sand in coordination with the sand making machine. XSD series high-efficient Sand Washing Machine, on basis of the practices in sand and stone industry, designed by our professionals. This series product possesses the good qualities that high cleaning, reasonable structure, high capacity, energy saving, low sand loss. The special design for the transmission part separating with water and sand enables its low maintenance. It is the best choice for our customers. It is always used in washing, grading and dehydrating quartz and sand in Construction Site. Sand stone Factories, Hydropower Station and Concrete Dam Site, Pre cast Concrete Factory, Glass Factory and etc. Models: XSD2610, XSD3016,XSD3620 Impeller Specification (mm) (D,W): ¦2600,1000, ¦3000,1600,¦3600X2000. Capacity (t/h): 20~50, 50~120,120-180 Feed Size (mm): ¡Ü10, ¡Ü10,¡Ü10 Overall Dimensions (L,W,H): 3320,2125,2670, 3810,2686,3085,4500,3206,3480.
Efficient crushing-type mills are widely used in metallurgy, mining, chemical, cement, coal gangue, construction, sand, refractory material, ceramic and other industrial and mining enterprises, engaged in breaking and crushing the material in the operation. It is mainly suitable for crushing various soft and hard ore. whose compression strength is not higher than 320MPa (MPa) Features: 1. High production and high crushing ratio. 2. Low power consumption, homogeneous particle size. 3. Simple, compact and light mechanical structure. 4. Low investment cost, easy management. Structure and working principle£º: Efficient crushing mill consists mainly of frame, rotor, hammers and grizzly bars and other components. The frame includes upper part and lower parts, which are welded by steel plates after cutting, the remaining parts bolted into one. High manganese steel liners are studded with inside the frame, to facilitate replacement for a new liners after worn; on the main shaft are installed several groups of the spindle distribution of the hammers, which consists of rotor with the axle of hammers and rotary table. The host drives the main shaft through the motor and V-belt driven spindle to rotate the rotor, generating the centrifugal force, then driving all hammers stretch around. The bulks of material feed into the crushing chamber, will be crushed by the hammers at a high-speed movement. The broken material requested will be passed the grizzly bars at the lower part and discharged, the unbroken rest will be left in the chamber to be crushed repeatedly by the hammers and iron plates until it can reach the requested standard. To avoid clogging, the water content of the material to be crushed not more than 5%. The performance parameters of efficient crushing-type mills: Model PC4008-75 PC4012-90 PC4015-132 Diameter of the rotor (mm) 750 900 1150 Length of the rotor(mm) 800 1200 1500 Rotation speed of the rotor (r/min) 800-1000 800-1000 700-1000 Max. input size(mm)
Vibrating Screen is also called Vibratory Screen,Vibrosieve, Screen, Circular Vibration Screens, Sieve, Sieving Eequipment, shaking screen, Inclined Screen,Circular Vibrating Screen,Vibrating Riddle, Screen Machine. For Vibrating Screen, the amplitude can be adjusted. It is of long screening line, multi-layers screen, correct to screen in all kinds of specification ,high efficiency in screening, so widely used in mine selection and sand stone crushing. Model:2YA1237,3YA1237,2YA1548,3YA1548,2YA1848,3YA1848,2YA1860,3YA1860,4YA1860,2YA2160,3YA2160,4YA2160,2YA2460,3YA2460 Spec.of Screen: 1200*3700 mm,1200*3700,1500*4800,1500*4800,1800*4800,1800*4800,1800*6000,1800*6000,1800*6000,2100*6000,2100*6000,2100*6000,2400*6000,2400*6000 Layers: 2,3,2,3,2,3,2,3,4,2,3,4,2,3 Sieve Pore Size(mm): 3-50,3-50,5-50,5-50,5-80,5-80,5-80,5-80,5-80,5-100,5-100,5-100,5-150,5-150 Max. Feed size: 200 mm,200,400,400,400,400,400,400,400,400,400,400,400,400 Capacity: 7.5-80,7.5-80,50-208,50-250,50-260,50-300,50-300,50-350,50-350,100-500,100-500,100-500,150-700,150-700. Trademark: SHIBANG Standard: ISO9001:2000 Unit Price/Payment: TT/LC.
Detailed Product Description: Ball mill is widely used for milling various kinds of ores or rocks in metal and non-metal mining and building material industry.The main bearing of the ball mill with the shell diameter 900-2100mm is spherical liner bearing; for the shell diameter 2700mm,the main bearing is completely closed self-aligning 120,bearing withBabbitt alloy of high lead and low tin with low hardness,underneath laid withcooling copper piping full of water The bearing is of static pressure structurewith high and low pressure united oil lubricating system. Our Ball Mill is the key equipment for grinding after the crush process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other materials able to grind. The Ball mill Model: §¶1830*3000,§¶1830*6400,§¶1830*7000,§¶2200*5500,§¶2200*6500,§¶2200*7500 Weight of ball mill:11£¬23£¬25,30,30,23.
Gypsum block production line of high quality, best price.
Capacity: 30,000 ton/year~240,000 ton/year Automation: fully automatic Calcination system: using boiling furnace to calcine, adopting heat conductive oil furnace as heat source Fuel: coal, natural gas, heavy oil, diesel oil. Packaging Details: wooden case packing /20 'container / 40 'container.
The parameters of the gypsum board production line are as follows: 1) Production capacity: 2 million ~20 million square meter per year. 2) Final product variety: common paper-covered, plasterboard fire resistance, paper-covered plasterboard, water resistance paper-covered plasterboard. 3) Product specification: thickness from 7mm ~ 15mm, length from 2400mm ~ 3000mm, width from 1200mm ~1220mm 4) Product quality: in conformity with standard of P.R.C gb/t9775-2008 paper-covered plasterboard. Wooden case packing /20 'container / 40 'container.
The paper faced gypsum board production line is the professional equipment for producing the new decorated material. The principal working process are as follows: first, we take certain amount of hemihydrate gypsum powder, water and other additives, through the automatic measurement device and automatic conveying system, they will be conveyed into the mixer and changed into the gypsum slurry which will be scattered on continuous moving faced paper evenly. Second, at the same time, with the continuous moving and vibrating, the slurry will gradually diffuse and even scattered. Then the slurry will go into the forming machine and compound with the top and bottom faced paper. By the process of extruding and forming, the slurry will be encased by the faced paper and the continuous pulpous gypsum boards are formed. Third, In the forming line, the wet solid paper faced gypsum board will be gradually formed after the process of recondition, natural coagulating, automatic cutting, etc. The wet board will be arranged according to the programmed control system. With the help of rollers, belt conveyer and overturner, they will quickly enter into the dryer. Fourth, the board will be strictly controlled in the separate temperature zone of the dryer. After blowing into different thermal hot air, the moisture of the wet board will be evaporated. Because of the reaction of the starch, the board will be attached to the faced paper, and then the dry gypsum board will form and exit from the dryer. Moreover, after passing though overtuner and the folding device (the front side is inside) for the second time, the board will be cut into certain specification by saw. Finally, the finished gypsum board will be conveyed to the automatic sealing device and the stacker. After the stacking, the board will be transported to the finished products warehouse by the forklift. 40 feet container for transportation.
gypsum powder machine The big sized gypsum stones are crushed into granules which are less than 25mm by the crusher. After storing and conveying, they will be conveyed into mill for grinding.Then they will be classified through a analytical engine. The qualified powder will be conveyed to the calciner for calcination, while the unqualified one will return to the mill for further grinding until it is qualified. The calcined gypsum powder (it¡¯s usually called Plaster of Paris) will be stored in the finished product silo for the preparation of plasterboard raw material or directly packing and transport to the customer;s site. There are two types of the gypsum powder productionline. One uses the direct burning calciner (it is usually used in the small capacity line, such as 20000 or 30000 tons per year), the other uses the fluidized bed furnace (it fits for all the capacity of the gypsum powder line. This style is very popular in the gypsum powder industry.). Use 40 feet container to transport.
1. PVC film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. 2. aluminum film lamination machine Usage and Characteristics The lamination machine is used to paste the decorative film and boards together. First, put the board on the rollers. After the dust collection process, coat the glue on the boards, the glue will be qualitatived after conveying on the guide rollers. Then it will be combined with the film and enters into the recombination mechanism. After passing and cyclic rolling of the two lines of press roller, pinch roller and forming roller, the recombination is finished. The machine is fit for the surface decorative materials, such as pasted and compound decorative film and decorative paper, etc of the PVC baseboard, profile, low foaming board and wood board, etc. Specification: Max lamination width: 1300mm Max lamination speed:2-15m/min The thickness of the laminated board: 2-50mm Transmit power: 4.50kw Power: 380V,50HZ(can be made according to the inquiry) Size: 12600*1950*1600. It uses 40 feet containers to transport.
Gypsum powder equipment is composed of elevating system, dust collecting system, conveyor system, heat supply system, milling system etc.. And the heat supply system is the key link of the whole gypsum powder production line. The gypsum produced by our company has the following characteristics: 1.The equipment has small volume but large yield. 2.The equipment with easy structure can not be damaged easily. 3.The compact equipment covers less area. 4.It has comparative less energy consumption. 5.It can be conveniently operated and easily controlled. 6.The products are of good quality and gypsum of Paris is of ideal components and stable physical properties. 7.The capital construction investment is small and operating expense is low. Container.
