ValveTech is the most modern conversion line with an advanced automation and control system that offers high productivity and efficiency with its indigenous design. It produces both side stitched bags with a valve at one corner of the bag. The valve type bags are used in packing of various materials such as Cement, Salt etc. The material is filled through the valve using a hose and once the bag is filled the valve shuts automatically providing a locking system. ValveTech is best suitable for non-laminated woven fabric with an option for laminated fabric. ValveTech 35 model has the capacity to produce up to 35 Valve Type bags/min. ValveTech conversion line, with servo & PLC control ensures high efficiency with minimal wastage and considerable savings in manpower & materials. Technical Specifications Width of unwinding fabric roll 470 mm to 520 mm Maximum Cutting Length 850 mm to 1050 mm Maximum Cutting length accuracy ± 5 mm Folding unit 1 20 to 30 mm adjustable Folding unit 2 40 to 45 mm adjustable Output Bags/min Up to 35 bags
JP developed Conversion lines for producing bottom folded and sewing woven sack made from a roll of tubular woven PP/HDPE fabric. JPBCL 850 model from J P EXTRUSIONTECH LIMITED is a high-speed machine suitable for conventional bag application and is designed for cutting the tubular fabric, bottom folding, sewing, and stacking. This new generation machine with servo and PLC controls is designed for fabric width up to 850 mm and cut length up to 1400 mm with speeds up to 30 to 40 bags/min. Depending upon the material, width of the fabric, length of the bag, number of folds, stitches etc. This bag making machine is most appropriate for working with un-laminated fabric but can also be converted to use laminated fabric. Advantages of this conversion Line: State of the art automated operation & consistent quality of end product (cut & sewn bags.) Reduced space requirement in finishing department for converting the roll of fabric to the finished bag. Reduced manpower requirement for producing the same quantity of bags. Technical Specifications : JPBCL 850 General Parameters Diameter of Unwinding Cloth 1400 mm Maximum Width of Unwinding Cloth 300 to 850 mm Maximum Cutting Length 500 to 1400 mm Adjustable Cutting Length Accuracy ± 1 mm Production Capacity 30 40 Bag/Minute (depending upon the bag size). 1st IN-FEED NIP Driven Motor 0.75 KW AC Motor with Inverter Control Feeding Type Auto Control, Non-Stop Feeding Type Tension Contro By Dancing Rollers 2nd CUTTING IN-FEED NIP Driven Motor 2.25 KW Servo Motor Feeding Speed Synchronized with Production Settings. Bag Mouth Auto Opening Bag mouth auto opening arrangement through reversing nip. CUTTING STATION Cutting Knife (Heat Cutting) Flat Type (Straight Line) Special Alloy Steel Cutter. Cutting Knife (Cold Cutting) Cutting through Rodless Cylinder. Heat Cutter Operation Through pneumatic cylinder with sensor
Carpets, cusions, rugs, poufs, jute articles, curtains, recycled rugs.
Fabrics in jute, jute cotton, linen, shopping bags in all of the above material, fashion bags combined with leather and jute.
Tape Extrusion Machine [ for making Woven Sack Tape PP/HDPE], Circular Weaving Machine [ for making Woven Sack tubular / flat fabric], 3. Extrusion lamination & Coating Machine[ for coating BOPP/Paper/Pond lining/lumber wrap etc.], 4. Flexographic Printing Machine[ on woven fabric laminated / Un-laminated /Roll to Roll], 5. Bag Cutting and Stitching machine [ to make bag for Food grains/Fertilizer etc.], ValveTech Machine - To make Valve bag [ to make Cement bag]..Manufactures
Leather apparels like biker jackets, men jackets, casual jackets, blazers, women jackets, boy girl jackets, men women vest, skirts, pants, belts, trousers, aprons, gloves, caps, leather goods like hand bags, sling bags, laptop bags, office bags, backpack, briefcase, city bag, messenger bag, grab handle, hobos & shoulder bag, small handbag, tote, sling & cross body, embroidered bags, work bag, handbag trolley, travel bags & duffles, suitcases, women's bag, wallets, gym bag, card case, passport cover, women's clutch, toiletry bag, mouse pad, key pouch, car documents case, portfolio file folder, earphone holder, restaurant bill folder, mobile case holder.
Paper bag making machine is used for making paper bags.The machine can be attached with single, two or four colour, flexo printing. Seaworthy wooden case.
Paper bag making machine is designed to manufacture flat and satchel paper bags from kraft paper, greaseproof, white paper and poster paper etc. Grocery, dry cleaners, etc. MODEL RI – I (BIG SIZE) Paper BagMachine complete with 3 H.P. D.C. Thyristor Drive and Panel & complete with online 2 Colour Flexo Printing Machine and other accessories, capable of producing Flat Bag sizes Minimum : 5”x 8” and Maximum : 16”x 21”, a set of Plate will be supplied alongwith the machine to produce Satchel type Bags. The Machine is well finished by providing covers made of Powder-Coated thick MS Sheet, Digital Counter Meter etc. MODEL RI – II ( SMALL SIZE) Paper Bag Machine complete with 2H.P D.C. Drive Motor with 2 Colour Flexo-Printing attachment and capable of producing Minimum 3”x 8” and 10”x 14”. Other features are alike as mentioned in the item no.1 Production Capacity : 45000 to 50000 Pcs. per 8 Hours shift on 30 Gsm to 100 Gsm Paper. . Machine is also capable to produce plain Paper Bags as well as Satchel type Paper Bags (Gusseted).
Multiwall (1 to 6 ply) Flash Cut Paper Tuber Machine with online Flexoprinting attachment (1 to 4 colour). Technical Specifications : a) Machine Length : 48 ft. b) Machine Width : 7 ft. c) Machine Height : 9 ft. d) Working Width : 5 ft. e) Production Speed : 40 to 50 Pcs. Tube per Minute +_ 5% (approx) f) Finished Tube Size g) Length Minimum : 510 mm Maximum : 1370 mm ii) Width : Minimum : 300 mm Maximum : 720 mm iii) Gusset Size : a)Minimum 50 mm b)Maximum 200 mm g) No. of Ply : 1 to 6 Ply h) Paper Deckle Length : Minimum 625 mm Maximum 1465 mm Paper Reel Dia : Minimum 100 mm Maximum 1250 mm i) Maximum Reel Weight : 1.5 M.T. j) Motor :5 H.P. D.C. Drive Motor with Control Panel. Mechanical specification: The construction of machine is robust and fabricated from 60mm. Thick cast iron. Unwinding sections By C.I. Casting and mechanical brakes. Dancing rollers made out of seamless m.S. Pipes of 90mm. Dia. Stainless m.S. Tank of 25 kgs. Capacity for gluing is provided in a seam pasting section. A tube forming table with gusseting system will be provided. The npping section will be equipped with required nos.Of synthetic rubber rollers. A cutter section will be provided A lifting table will be provided for the stacking of paper tubes The machine can produce 25kgs, 50kgs paper bags after bottom pasting or stiching.
Characteristics OF BM-01 Production Speed up to 250 Bags/min ( variable on sizes ) Size changeover simple and rapid in some case totally automatic Technology Gearless in all 20 shafts of work Final Cut-off with cut of scissors Automatic conveyor for single packs of bags on the top (number of pieces per pack can be selected) Reel dimension: Max Width 1250 mm Max Diameter 1300 mm Tension Controller with brake through load cells . Automatic Control of the alignment of paper Supervisor display for size change, production control and diagnostics. Remote Control for Assistance and Technical support on-line. Transversal vinyl glue applicator with automatic loading. Hot-melt Glue Applicator Group with proportional variation from 18 kg/hour. High pressure power source of vinyl glue with electronic regulation. Sizes Of Realizable Bags: All Heights from 10 to 50 cm All Bottom Widths from 5 to 20cm (to 40 cm optional) All Lengths from 21 to 100 cm Substance of used paper from 75 gr to 125 gr. Dimensions Of Handles: The twisted paper cord handles that can be produced: Fixed step from 9,52 cm width (variable step is optional) Handles Height from 8 to 15 cm variable automatically Diameter of the used twisted paper cord from 4 to 6 mm ( supplied by you ) Patch length 19,05 cm Substance of patch paper from 75 to 90 gr. Dimensions Of BM-01 Width max 3 mt. Height max 2, 5 mt. Length max 16 mt. Encumbrance lateral area of handle making unit and glue unit 4 mt x 4 mt.
Microcomputer control, Steppng motor feeding material, Photo-eye tracking, computer fixed-length, Pneumatic Punch, magnetic powder braking ,auto-stopping, ultrasonic rolloff, ultrasonic sealing bottom and so on. It enable the sample in good and hard sealing, high speed, high efficiency. lt is your ideal excellent environmental-protection bag making equipment. Wooden cast with export standard.
For making pe, pp, opp and bopp bag used for pack custume, food, stationery and so on. Wooden cast with export standard.
Bag making machine suit to make T-shirt bag,vest bag ,flat open bag,garbage bag,bag in roll,table bag. With one photocell Bag width:600-1200 Film thickness:0.01-0.1mm Material:PP,BOPP,PE.
Newly developed compact clutch and brake, production capacity 40-60* strokes / min. Maximum draw length 750mm. Double line single and double sealer made by heavy duty gun metal with tilting arrangement, will be suitable for plain and carry bags. Each sealing rod with two strip heaters control by digital temperature control. Back rollers with six rolls feeding arrangements, back roller driven by 0.5hp pmdc motor control by thyristor. Heavy duty static discharger with three electrodes. Digital stroke counter. The machine control by fully equipped control panel. Sea worthy wooden packing
This machine is the production of disposable plastic gloves, a special machine. The price is lowest in the world, quality assurance, and credit management. Technical parameters Model Brand-ming yang myd-300 Glove making length 900 (mm) Glove making width 400 (mm) Glove making speed 130pcs/min Thickness of glove making 0.01-0.050mm Output 7800pcs/h Motor powers 1.5(kw) Total power 3.5(kw) Power supply 220v/380v 50hz Overall dimension 200(l)*1150(w)*1250(h) Total weight 750kg
Performance & use This type of machine is suitable for processing flat bags and waistcoat bags, with rolling films in primal color or colors. The setup of length and speed are controlled by the computer which keeps the waste much less and operate much more easily. It is accompanying with the automatic functions about carrying material sealing cut, counting, sending out and alarm, etc. Technical parameter Brand-ming yang model myc-1100 Bag length 2500 (mm) Bag width 300-1000 (mm) Bag speed 80 (times / min) Motor power 8 (kw) Power source 380v 50hz Dimension 6800(l)*1600(w)*2200(h) mm
Feature This machine a specially-designed point-cut rolling dual-purpose for vest & flat bags, is controlled by a computer, the step (servo) setting length system reduces the sealing-cutting dimensions errors, and the installation of photoelectric eyes track help make the position of figure of printing bags accurately, the computer numerical control can be selected to adjust the length of bag the machine will automatically stop and sound a warning if there is something wrong with the printing bags. Main technical parameter Model Myz-500 Max. Width of bag-making(mm) 500 Max. Length of bag-making(mm) 1800 Bag-making thickness 0.008-0.15mm Speed of bag-making(pc/min) 30-200 The kinds of bag making Color printing bags; white bags Bag making methods Rolling vest bag and rolling flat bag Power of motor(kw) 1.1 Electric heating power(kw) 1.2 Total power(kw) 6 Packing dimensions(l x w x h)mm 3600x1200x1700 Machinery weight (kg) 1200
It is suitable for produding vest bags and flat-opening bags with printing. The main motor adopts frequency conversion motor to save more electricity and regulate speed more freely.
Xd-hq600 belongs to plastic film bag-making machinery and can operate at a high speed under the unattended situation. It use inverter to control speed, easy operation, and reduce electric consumption. It is a bag-making machine specially adapted to u type plastic films and can deal with bag bottoms, which is suitable for large, medium or small bag-making producers; xd-rjhq600 type bag-making machine has a high-speed operation ability of producing average 80-120m/min film bags per minute and can operate continuously and stably for a long time. While using this machine can carry on blanking process in the case that no special operator operates and manages for a long time during operating.If raw materials use up, this machine will stop running automatically. If the operator fills the new film materials well, it will continue operating.