Aviation turbine fuels are used for powering jet and turbo-prop engined aircraft and are not to be confused with Avgas.
Outside former communist areas, there are currently two main grades of turbine fuel in use in civil commercial aviation :
Jet A-1 and Jet A, both are kerosene type fuels.
There is another grade of jet fuel, Jet B which is a wide cut kerosene (a blend of gasoline and kerosene) but it is rarely used except in very cold climates.
JET A-1
Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38C (100F) and a freeze point maximum of -47C. It is widely available outside the U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91 (Jet A-1), (formerly DERD 2494 (AVTUR)), ASTM specification D1655 (Jet A-1) and IATA Guidance Material (Kerosine Type), NATO Code F-35.
JET A
Jet A is a similar kerosene type of fuel, produced to an ASTM specification and normally only available in the U.S.A. It has the same flash point as Jet A-1 but a higher freeze point maximum (-40C). It is supplied against the ASTM D1655 (Jet A) specification.
JET B
Jet B is a distillate covering the naphtha and kerosene fractions. It can be used as an alternative to Jet A-1 but because it is more difficult to handle (higher flammability), there is only significant demand in very cold climates where its better cold weather performance is important. In Canada it is supplied against the Canadian Specification CAN/CGSB 3.23
MILITARY
JP-4
JP-4 is the military equivalent of Jet B with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-4. (As of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-4 also meets the requirements of the British Specification DEF STAN 91-88 AVTAG/FSII (formerly DERD 2454),where FSII stands for Fuel Systems Icing Inhibitor. NATO Code F-40.
JP-5
JP-5 is a high flash point kerosene meeting the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-5 (as of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-5 also meets the requirements of the British Specification DEF STAN 91-86 AVCAT/FSII (formerly DERD 2452). NATO Code F-44.
JP-8
JP-8 is the military equivalent of Jet A-1 with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-83133E. JP-8 also meets the requirements of the British Specification DEF STAN 91-87 AVTUR/FSII (formerly DERD 2453). NATO Code F-34.
We work Directly with Refineries in the Russian Federation,
NO long Chains!! Easy Procedures, Fast Transactions for Buyers Who Follow Procedures and Have Funding in Place.
One of our refinery Group comprises one of the Largest Firms of its Kind, Allowing us to offer custom Pricing for select Clients!
ONLY Buyer who can follow refinery procedures Need to Apply!
Your client will need to choose these procedures and create an ICPO, cutting and pasting the Procedures into the new ICPO with it and address the ICPO to :
REFINERY AGENT.
Once the Refinery gets your buyers ICPO and SCO will follow.
PROCEDURES
FOB (DIP & PAY/ SPOT)-TRADING PROCEDURE
1. Buyer issues ICPO, company registration certificate, and data page of buyer's Passport or any I.D.
2. Seller issues Commercial Invoice (CI) Buyer signs and returns back to the seller with completed NCNDA / IMFPA.
3. Buyer issues Proof of funds (POF: Promissory Note) via swift MT799 to seller's nominated bank (bank to bank) to guarantee performance.
4. Seller issues below Partial POP materials to Buyer/Buyer's bank through email/ courier:
a) TSA, TSR& SGS REPORT,
b) REGISTRATION CERTIFICATE,
c) STATEMENT OF PRODUCT AVAILABILITY,
d) PRODUCT STORAGE LOCATION/GPS COORDINATES,
e) AUTHORITY TO SELL & COLLECT,
f) ATTESTATION TO VERIFY,
g) INJECTION REPORT,
h) UNCONDITIONAL DIP TEST AUTHORIZATION (UDTA).
5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected into the tanks through the means of MT103/23 and final payment via MT103 or TT-Wire upon transfer of the Title of Ownership to the Buyer.
6. Seller pays all intermediaries involved in the transaction, upon successful lift, monthly extended shipments continue upon success and satisfactory by sides.
If your clients don't want mt799, they can provide an attorney attestation letter to guarantee to close with ICPO. Then replace MT799 with mt199(cost-free)
Only Refinery Procedures will be used on any deal, no exceptions!
Please contact me with any questions and additional procedures.
Properties
Flash point, Co
Distillation: 50% recovered, Co
90% recovered, Co
95% recovered, Co
Kinematic Viscosity at (40 Co), mm2/s
Ash, %mass
Aromatic Content, Vol %
Sulfur Content, %mass
Copper Strip Corrosion Rating
(3h at a minimum control temperature)
Cetane Index
Cloud Point, Co
Ramsbottom Carbon Residue on 10% Distillation Residue, %mass
Colour
Water, %mass
Density (15 Co), kg/m3 Lubricity HFRR@ 600 C, micron
Specification
Min 57
Max 300 Max 355 Max 370
1.9 - 4.1
Max 0.01 Max 35
Max 0.05
Max No. 1
Min 45
Max 12
Max 0.3
Max 3.0 Max 0.05
Report Max 520
Test Method
ASTM D93 OK
ASTM D86 OK
ASTM D445 OK ASTM D7042
ASTM D482 OK
ASTM D1319
ASTM D2622 ASTM D5453 OK
ASTM D130 OK
ASTM D976 ASTM D4737
ASTM D2500 ASTM D524 OK
ASTM D1500 OK ASTM D95
ASTM D1298 OK ASTM D4052 OK
ASTM D6079 O
The tarmac air craft tiedown system (tacts) was designed to give the land-based end user an option to use a field maintainable, self-sealing, superior tiedown system for securing aircraft. Existing systems are outdated and lend themselves to numerous and sometimes costly problems such as tripping and particle hazards.
Constant retention of water causes rust and concrete degradation.
Concrete chips from damaged concrete being chipped away by the tie down deck fitting hooks are common. If large particles or chips are not removed prior to aircraft engine operation, this could be extremely dangerous and costly.
Should the tie down dowel need replacing, the entire area around the anchor needs to be cut out, fresh concrete poured, tested, and certified.
The platform air craft tiedown system (pacts) was designed to give the marine / offshore end user an option to use a field maintainable, self-sealing, superior tiedown system for securing aircrafts. Existing systems lend themselves to numerous and sometimes costly problems such as tripping hazards and corrosion from water retention.
JET A-1 Is an aviation fuel formerly known as "kerosene" which is suitable for most jet aircraft, and it is the principal fuel used for jet turbine engines. It is also used in general aviation for compatible diesel engine planes. It meets stringent international requirements, particularly those of the latest versions of the AFQRJOS, the British DEF STAN 91-91 standard, the ASTM D1655 standard, and the NATO F-35 specification. It has a minimum flashpoint of 38'C and a maximum freezing point of -47C. JP 54 It is a powers gas turbine aircraft engines. Jet A and A-1 have specifications that can be used in fuel worldwide. Jet B is used in cold weather elements. Commonly a number of different mixtures make up jet fuel and this relates to flash points and how the carbon numbers are distributed. Actually most jet fuel exported from Russia etc. is "JP54" or "Colonial JP54". It is similar to "Jet A" except the the Specific Energy is 18.4 mj/kg compared to that of 42.8 mj/kg of "Jet A
We Supply: Jet A-1, D6, EN 590 ppm 10, and Murray 16
We are not a scam. I will even tell you the refineries we have relationships with.
Jet A-1: $88
EN590: $540
D6:$ .91
HOUSTON/ROTTERDAM
PROCEDURE ON FOB- Jet A-1, D6, and EN 590 ppm 10
TANK TO TANK INJECTION
1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery.
2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice and tank storage agreement
(TSA).
3. Seller provide buyer with the below listed PPOP.
A. Product Passport (product analysis report)
B. Irrevocable Commitment Letter to Supplier
C. Tank Storage Receipt (TSR)
D. Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm
4. Seller provide buyer with SGS report, Injection Report, unconditional DTA
5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage
receipt (TSR) seller proceed for Tank to Tank injection and provide buyer with the injection report of the product into
buyer tanks.
6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to
buyer with all exportation documents required of buyer for the transaction.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
PROCEDURE FOB Houston Texas - TTV/TTT DIP & PAY:
1). The Buyer issues ICPO (including Buyer's passport copy, company registration, bank
details) together with CIS/KYC.
2). Seller issues Commercial invoice (CI) to the Buyer.
3.) The Buyer signs CI and sends it to the Seller along BCL or MT199.
4). The Seller issues to Buyer the PPOP documents listed below on receipt of the signed
Commercial invoice from Buyer:
a. TSR registered with the Port Authority
b. Injection report
c. 24-48 hours SGS report
d. Unconditional Dip Test Authorization (UDTA)
e. Authorization to Verify (ATV) with SGS and with Seller's tank farm
f. Certificate of origin
5). The Buyer arranges to conduct a Dip test in Seller's tank with SGS (or equivalent)
officials and receives fresh SGS report.
6). Upon receiving and verifying the fresh SGS report, if the Buyer approves the result of
Dip test Buyer issues CPA and Q88. Buyer issues NOR.
The Seller releases the Injection scheduling agreement (TTVIA).
7). The Seller injects product into Buyer's vessel(s) or tank.
After successful injection in Buyers' vessel(s) or tank, Buyer pays total cost of product via
MT103.
Product 5 Jet Fuel-Jet A1 GOST R 52050:2006 Origin Russian Federation Specification International export Standard Trial Shipment Quantity 1,000,000 bbls (+/- 5%) Monthly Shipment Quantity 2,000,000 bbls x 12 Months with possible roll & extension Price US$35 USD gross/US$33 USD net per bbl Payment SBLC MT760/DLC MT700/MT103 Packing By Bulk Inspection SGS or Similar By Seller Delivery CIF Any Safe World Port (ASWP) Loading port Novorossiysk, Nakhodka, Ust-Luga Port Russia Insurance 110% by Seller Performance Bond 2% PB in favour of Buyer
This Is A Very Low Price And The Procedures Are Very Strict And Can Not Be Changed. So Not To Waste Time You Must Send Loi From Valid Buyer, We Will Send You The Different Fob And Cif Procedures And You Must Adheare To Them And This Will Be A Smooth Transaction
Hello Everyone, We proudly represent a highly reputable and proficient seller,� a major refinery supplier with a stellar track record of excellence. The outstanding performance of our refinery partner speaks volumes about their credibility and capability. If you have a ready and capable buyer, rest assured, we have the perfect foundation for a mutually beneficial deal.
For a copy of our standard port authority-approved SCO, which includes pricing, seller procedures, product origins, and other relevant details, please reach out to us via:
Hello Everyone, We proudly represent a highly reputable and proficient seller, a major refinery supplier with a stellar track record of excellence. The outstanding performance of our refinery partner speaks volumes about their credibility and capability. If you have a ready and capable buyer, rest assured, we have the perfect foundation for a mutually beneficial deal.
For a copy of our standard port authority-approved SCO, which includes pricing, seller procedures, product origins, and other relevant details, please reach out to us via:
