Please click here to check who's online and chat with them.

Find Verified Paints Suppliers, Manufacturers and Wholesalers

Feb-21-24

Curing Compound

$120
MOQ: Not Specified
Supplier From Nagpur, Maharashtra, India
 
Curing compound is a liquid coating applied to freshly poured concrete surfaces to promote hydration and ensure proper curing. It forms a membrane barrier that retains moisture, allowing the concrete to cure uniformly, minimizing cracking and enhancing strength and durability. The compound also prevents rapid moisture loss and surface evaporation.
Apr-06-23
Supplier From Navagam, Gujarat, India
 
Description

Two-component, air drying polyurethane based clear.

Recommended Use :-
This product is recommended Top coat for glossy , uv protection,weather property and also as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system.

Physical Data :-
COLOUR : Clear
FINISH : Smooth & Glossy
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 16 sq.mt / ltr at a DFT of 25 �µ
FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C
DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
New concrete should be cured for at least 1 month prior to paint application. Ensure concrete surface is absolutely dry and free from moisture, oil, laitance, dust and dirt. For old concrete, ensure surface is free from oil, grease, algal & fungal growth and any old coating. Sand Blasting on concrete gives the best performance and should be given first preference out of the available surface preparation methods. If blasting is impracticable, Acid Etching with diluted Hydrochloric Acid followed by fresh water washing to be adopted. Seasoned wooden articles should be scuffed with Emery 220/400 to achieve smooth surface. Please refer our Directive Sheet on Surface Preparation.

Application Data
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : Indefinite
COMPATIBILITY : Can be applied on Epoxy primers and oleo-resinous primer and coated / over coated by two component paints like Epoxy, PU, etc.
Jun-24-23
Supplier From Jaipur, Rajasthan, India
 
AFFIX 1K  PU COATING water proofing  is a single component liquid applied, highly permanent elastomeric polyurethane based coating. It is designed to give long lasting, cold curing, maintenance free and superior waterproofing protection for concrete and steel substrates. It is UV stable coating and specially formulated for external applications.
May-30-23

Electrophoretic Coating

$10
MOQ: Not Specified
Supplier From Thailand
 
Electrophoretic Coating
Cathodic Electro Coating used in Metal and Jewelry Coating
Dec-16-22

Tung Oil

$135
MOQ: Not Specified
Supplier From Viet Nam
 
Our company is an tung oil
9160 Paints Suppliers
Short on time? Let Paints sellers contact you.
Oct-19-22

Acrylic Lacquer Coating

$1.10K
MOQ: Not Specified
Supplier From Morbi, Gujarat, India
 
Acrylic Lacquer coating is a Acrylic based high gloss and scratch proof clear lacuqer coating for applying on cement concrete block, paver block, reflective interlocking glossy block, chequered tiles. they give more coverage area and give more shining with reflective surface.
Oct-17-16
 
Introduction
Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials
act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing.
Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate.
Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors.

Typical Uses and Applications
Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway
barriers, posts and poles, offshore structures and marine structures.
Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles
EMI and RF shielding on plastic components (electric arc spray only)
Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps

Product Details
Chemical composition:
Type Chemical composition
Zn Al Others
Zn 99.9+ Balance
0.1
Zn 15Al Balance 15

Specifications
Grade AWS
Zn C2.25/C2.25M W-Zn-1

Physical Properties
Grade Density Rockwell Hardness
Zn 7.14 g/cm3
ZnAl 7.18 g/cm3

Typical Deposit Characteristics:
Grade Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab
Zn HRB 20 - 30 6.9 - 15.0 Mpa 24 lbs /hr/100A 0.7 Good
Zn 5Al HRB 40 -45 20.7 - 24.1 Mpa / / Good

Standard Sizes & Packing:
Diameter Packing Wire Weight
1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool
Other sizes can produced based on customers' requirement.
Oct-22-20
Supplier From Pathanathitta, Kerala, India
Sep-09-20
Supplier From Bhavnagar, Gujarat, India
Aug-20-20
Supplier From Delhi, New Delhi, India
Jun-24-20
Supplier From Suqian, China
Jul-09-24
Supplier From Mumbai, Maharashtra, India
May-15-25
Supplier From India
Feb-24-25
Supplier From Dubai, UAE, United Arab Emirates
Aug-22-24
Supplier From United Arab Emirates
Apr-20-22
Supplier From Surat, Gujarat, India
Oct-24-20
Supplier From India
Oct-23-20
Supplier From India
Jul-14-20
Supplier From New Delhi, Delhi, India
May-26-20
Supplier From Battaramulla, Western, Sri Lanka
9160 Paints Suppliers
Short on time? Let Paints sellers contact you.
See what buyers and suppliers are discussing in Paints import export community