1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Barite for oil drilling, coal bituminous, anthracite coal.
Portland cement, anthracite coal, crude and refined sunflower oil, crude and refined soybean oil and basmati rice..
F.C :84%-92% Ash :6%-15% max Moisture:3% max Sulphur: 1.0%max V.M: 4.0% max Size: 10-30mm MOQ:50,000MT
Anthracite filter media is a kind of filter used in water treatment. The product has large surface area, and its various indexes all exceed the construction department's standard. Anthracite filter media is especially selected from the deep well minerals, so it can contain the highest percentage of carbon. The raw material is always filter- ed and washed to make sure that the product can have a good effect on water filtration.
the Anthracite Coal catalog PRICES 6000-6500 KCAL (0-50 MM and 0-300MM). TOTAL MOISTURE -10.98 Mass Fraction -0.24 Ash Content -5.57 Ash Content -4.96 Volatile matter-45.77 Volatile matter-38.48 Sulphur-0.35 GAR-7665 NAR-6110
Anthracite is a type of coal with the best quality. The use of anthracite coal in steam power plants is classified as High Grade and Ultra High Grade coal. However, the supply is still very limited, which is as much as 1% of the total coal mining.
Ningxia Biyuan Activated Carbon Co., Ltd. sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization The best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Coal mine for sale. The reserve is comprised of an estimated 70 million tons of in ground semi-anthracite coal under just over 10,000 acres This is probably the largest known coal mine and it has never been mined. Because of semi-anthracite's high fixed carbon content, elsewhere it has found its greatest use for Pulverized Coal Injection (PCI) in which the coal is injected into a blast furnace to substitute for a portion of the significantly more expensive coke. The expected average assay of the coal is as follows: 1) Ash: 6 to 9%; 2) Moisture: 60. With conventional preparation, this coal should be acceptable in the PCI market. If, however, this coal is processed through a special proprietary refinery, the assay of the coal is projected to be as follows (with a strong tendency to be the better number in each case): 1) Ash: 2.2 to 7.6%; 2) Moisture: 1 to 3%; 3) Volatile Matter: 9 to 11%; 4) Sulfur: 0.6 to 0.8% 5) Heating Value: 12,500 to 13,500 BTU/lb; 6) Fixed Carbon 80 to 90%; 7) FSI: 9. So processed, this biorefined coal is perfect for any of the uses of metallurgical coal. Price is negotiable
We are able to provide Anthracite coal at GAR 4,000 - 6,500 Kcal/kg. contains 86%-97% carbon and generally has the highest heating value of all ranks of coal. Anthracite accounted for less than 1% of the coal mined in the All of the anthracite mines in the Laos are anthracite is mainly used by the metals industry. We are able to provide Anthracite Coal at GAR 4,300 â?? 6,500 Kcal/kg
We Supply Anthracite Coal We are able to provide steam coal at GAR 4,000 6,500 Kcal/kg. contains 86% 97% carbon and generally has the highest heating value of all ranks of coal. Anthracite accounted for less than 1% of the coal mined in the All of the anthracite mines in the , anthracite is mainly used by the metals industry.
Anthracite coal FC 82% Delivery terms: 1. FOB 2.- CIF elsewhere with SBLC as payment instrument.
The principal use of anthracite today is for a domestic fuel in either hand-fired stoves or automatic stoker furnaces. It delivers high energy per its weight and burns cleanly with little soot, making it ideal for this purpose. Its high value makes it prohibitively expensive for power plant use. Anthracite GAR 7.800/8.100 kcal/kg FOB supply capacity maximum 250.000 Metric Tonne Monthly FOB Price in usd per Metric Tonne = 260 - 280 usd/Metric Tonne
Coal, steam coal, anthracite, we are the supplier, 3800-8300kcal/kg, Call us if you need longterm and strong suppling, please, by
Coal, Steam Coal, Anthracite Coal.
Anthracite Coal, Dry Anthracite Coal, Carbon Raiser, Rice..
Anthracite coal.
Anthracite coal.
Anthracite coal coque.Marketing
Anthracite Coal.
