HTF launched SOA series optical amplifier products can be 1290nm ~1320nm wavelength range to achieve amplification. It can be easily used in 100G transmission system, the maximum can support 160G/s rate. SOA optical amplifier can be used for booster amplification, pre-amplification and other occasions. O-band optical signal overall amplification Covering the wavelength range of 1290 ~ 1320nm 100G 1310nm signal amplification Support O-band, 1290 ~ 1320nm band amplification Output power up to 10dBm 100G 1310nm signal amplification Support APC Low noise, high gain One board supports up to 2 channels of signal amplification
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
With the application of long-distance systems becoming more and more extensive, our company's self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission Wide operating wavelength range:1528nm~1565nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Middle stage access (MSA) EDFA models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility.New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1561nm Support systems to achieve different cross-section radio repeater transmission Operating wavelength range: Blue: 1528nm~1543nm Red: 1547nm~1561nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Flexible insertion of DCMs at different distances Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Single fiber bidirectional EDFA amplifier include an Red and blue port, Red optical amplifier include an blue out port and blue in port, Red optical amplifier Amplify red optical signal, blue out port and blue in port are used to access the amplifier to amplify the blue optical signal. Blue optical amplifier include an red out port and red in port, Blue optical amplifier Amplify blue optical signal, red out port and red in port are used to access the amplifier to amplify the red optical signal, Blue: 1528nm~1543nm. Red: 1547nm~1561nm.
Professional power ampifiers supplier. Many different kinds of amplifiers for your selection.
EDFA Optical Amplifier 1U Rack EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
Port: Tianjin, China Production Capacity: 100000/Month Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram Application: Power, Electronic, Instrument, Lighting, Rectifier, Audio Phase: Single Core: Core-type Transformer Cooling Method: Dry-type Transformer Winding Type: Auto-transformer Certification: ISO9001-2000, UL, ISO9001, CCC 1. Installation: Horizontal (non-conventional-type base plate), sunk, side type, and bridge. 2.Application: Especially low-hum and low-dispersing construction Low-level of induction High-grade design casing possible Statically shield winding and magnetical shield winding optional . Be used widely such as audio equipment,communication,new energy areas,Electrical control,Cable TV network etc. 3.Equipment: Over 50 sets toroidal/annular/ ring coil winding machines, 3 EI type transformer lines, 2 sets of vacuum annealing furnaces, A set of nitrogen and hydrogen production equipment as below: . Automatic Winding Machine . Semi-automatic Winding Machine . Toroidal Winding Machine . Insert Lamination Machine . Wave Soldering Machine . Plastic Termal Ultraviolet Machine . Domino Ink Jet Printing Machine Transformer Multitester for High & Low Frequency Layer Insulation Withstand Voltage Tester 4.Warning Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'. 5.Certificate The certificate of our transformer has CE CQC RoHs UL 6.Note The above-mentioned toroidal transformer is frequently-used, we can also manufacture the products by customer design. And the specification is for reference, if has the change further, please take the material object as the standard. 7.GREWIN'S Dimension : External diameter: 55mm-300mm, height :13mm-130mm, Efficiency: 75-98% we can design the appropriate products according to customers' requirments such as installation dimension, input and output voltage,power...etc.) Toroidal Transformer Coil Winding Machine with ISO9001 CB IEC Approval
Manufacturer Xiaomi Model Mi WiFi Amplifier 2 Type WiFi Amplifier Dimensions 12.003.009.00 cm Weight 50 g Material ABS Transmission speed 300 Mbps/c Antennas 4 PCB USB 2.0 USB rotation angle 180 Color White Package Mi Router x1 User manual x1
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application. FUNCTIONï¼? C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission HIGHTLIGHT: Wide operating wavelength range:1528nm~1565nm Three Optical Amplifier C-Band applications: Booster , In-line, Pre-amplifier Low noise figure: typical: 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension. An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Application: Magnetic amplifier switching power supply Advantage: 1.Low coercivity 2.Make the core size more small 3 High saturation magnetic induction Bs 4.Compared with co-based amorphous core, nano core has lower price. 5.Compared with cobalt-based amorphous core, nanocrystalline core has a higher Curie temperature ,better temperature stability -40~120
PLC Amplifier is a relay board used for isolating and amplifying current between PLC and load, so it is also called IO relay board. Its function is to improve the load carrying capacity of PLC and protect PLC from overvoltage, overload, short circuit of load and other faults, which will lead to the damage of PLC host. Specific price, Size, Weight Are subject to Inquiry Competitive brands rexroth, HAGGLUNDS, AVENTICS, Danfoss, Parker, MOOG, sunhydraforce, EOWARDS, Leybold, INFICON ,NSK and other European and American brands.
PA amplifers(public address amplifiers) have two types of loudspeaker outputs,one is constant resistance with 4-16 ,the other is constant voltage with 70V/100V
Amplifiers.
Pre amplifier HSS fidelity.
P a amplifiers.
Hdmi splitter, conventor, amplifier.Repair it for one year
Guitar amplifiers, bass amplifiers, keyboard, amplifiers, multifunctional amplifiers, guitar effects, guitar effects, Guitar and bass tuners, pedals.
Electronic components, active components, passive components, DC-DC Converters, isolated amplifier.
Digital/ vacuum tube audio amplifier , 2.4g wireless audio amplifier, mini dac, high quality dac, a type head phone amplifier.
