Product name: double glass silk covered wire. Low product introduction: glass silk covered wire is according to customer requirements, even on the copper (aluminum) conductor winding and 1 to 2 layers of alkali-free glass fiber, with the required heat resistance index and compatibility of dipping, baking varnish, and between the glass fiber, glass fiber bonding between conductor into a whole, at present the product of heat resistance index, 130, 155, 180 at three levels, with an average of 20 insulation thickness,30,40,50 four grades. This product is widely used in transformer, electromagnet, welding machine or other similar electrical equipment product winding. The electroless copper (aluminum) wire produced by extrusion process is the most ideal material for the production of glass filament copper (aluminum) wire. Standard: GB/ t7672-2008. Production scope: Aluminum flat wire Narrow side dimension a:1.00mm -- 6.30mm. Wide side size b:3.00mm - 25.00mm. Copper flat wire Narrow side dimension a:0.80mm -- 5.60mm. Wide side size b:2.00mm - 16.00mm. Copper aluminum round wire Diameter: 1. 1. Please contact us if you choose the above range. Low material: Aluminum flat wire should comply with the regulations of GB5584.3-2009, when 20 , the resistivity not greater than 0.0280 © was/m Copper flat wire should comply with the regulations of GB5584.2-2009, when 20 , the resistivity not greater than 0.017241 © was/m Low glass should be closely evenly around the conductor, double glass package copper (aluminum) line of two layers of glass wool around the package direction should be the opposite, and the double glass package copper (aluminum) flat wire insulation thickness should comply with the following table, narrow at the edge of the insulation thickness (B - B) do not make the inspection.
Polyester-imine enameled wire, Thermal class 180. Good feature: good thermal shock performance, good resistance to softening breakdown at high temperature, excellent performance in mechanical strength, better resistance to solvent and refrigerant. Defect: easy to hydrolysis in a closed condition. Application: widely used in high heat resistant requirements of the motor, electric appliance, instrument, electric tools, dry type power transformer windings.
NOMEX paper-covered aluminium wire Product introduction: NOMEX paper-covered aluminium wire is made by oxygen free copper rod or aluminum wire rod and T410 type insulating paper wrapping produced by DUPONT USA. It is mainly applied to transformer, electric welding machine, electromagnet or other similar electrical equipment winding. Bare copper (aluminum) wire produced by extrusion process is optimal materials for NOMEX paper-covered aluminium wire Executive standard: GB/T7673.3-2008 and company standard Production range: flat aluminium wire Narrow edge size a:1.00mm,8.00mm Broad side size b:3.00mm,25.00mm copper strap wire Narrow edge size a:0.90mm,5.60mm Broad side size b:2.00mm,16.00mm Copper aluminum round wire Diameter: Ï?1.7,Ï?8.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20,. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20,. NOMEX paper-covered wire technical index (company standard) NOMEX paper adopt 2mil T410 type NOMEX paper produced by DUPONT USA.
Polyester-imine enameled wire, Thermal class 180. Good feature: good thermal shock performance, good resistance to softening breakdown at high temperature, excellent performance in mechanical strength, better resistance to solvent and refrigerant. Defect: easy to hydrolysis in a closed condition. Application: widely used in high heat resistant requirements of the motor, electric appliance, instrument, electric tools, dry type power transformer windings.
NOMEX paper-covered aluminium wire Product introduction: NOMEX paper-covered aluminium wire is made by oxygen free copper rod or aluminum wire rod and T410 type insulating paper wrapping produced by DUPONT USA. It is mainly applied to transformer, electric welding machine, electromagnet or other similar electrical equipment winding. Bare copper (aluminum) wire produced by extrusion process is optimal materials for NOMEX paper-covered aluminium wire Executive standard: GB/T7673.3-2008 and company standard Production range: flat aluminium wire Narrow edge size a:1.00mm8.00mm Broad side size b:3.00mm25.00mm copper strap wire Narrow edge size a:0.90mm5.60mm Broad side size b:2.00mm16.00mm Copper aluminum round wire Diameter: Ï?1.7Ï?8.0 If specifications beyond the above range, please contact us Materials Flat aluminium wire should be compliant with GB5584.3-2009, specific resistance is not more than 0.0280Ωmm2/m at 20. Copper strap wire should be compliant with GB5584.2-2009, specific resistance is not more than 0.017241Ωmm2/m at 20. NOMEX paper-covered wire technical index (company standard) NOMEX paper adopt 2mil T410 type NOMEX paper produced by DUPONT
Aluminum wire (Pure Aluminum Wire, Aluminum Line and Spray Finishing Aluminum Wire) ,The surface of aluminum wire is smooth and bright; no break of wire exists; single wire has no greasy dirt, burr, scratch or scar; there is no block of device in application. The product adopts high quality aluminum ingot, no other substances enter the process from raw material (aluminum ingot) input to strip output, and the product is not exposed to other metal. The detection adopts DF-100 type direct-reading spectrometer, inductively coupled plasma atomic emission spectrum and other high-end testing instruments. Strict check and detection are conducted in the whole working procedures including raw material-wire output-big drawing-middle drawing-water tank-baling-storage. Not a tiny detail is neglected. Hence, the long-term stability of product performance is ensured. The content of each batch of aluminum wire is guaranteed to be above 99.7%. Specifications Composition : Al 99.7% Diameter:1.2-4.75mm Package : 20-150kg/bundle , 7kg/Spool Characters 1. The size and shape of spraying are insusceptible. Spraying can be conducted on the whole surface, or on a large defined surface, which is a convenient and economical method in coating the partial surface of a large unit. 2. The parent material doesn t change. For the heated temperature on parent material is low during spraying, the work piece only distorts slightly. 3. The thickness of coating varies in a large range, from several microns to several millimeters. 4. Spraying moulding is available. Thermal spraying technology can not only form a coating on the surface of material, but also be used to manufacture machinery parts, namely, spraying molding products. Transportation & Storage: Wrap page and means of transportation with acid, alkali or salt that may corrode aluminum are forbidden. Aluminum segment should be stored in a dry and ventilated storeroom which is free of corrosive substance and be protected from rain. Application Aluminum wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
Zinc aluminum alloy wire The raw materials used in all 0# zinc distillation zinc ingot quality, high purity zinc, the zinc content of more than 99.995%, the strict implementation of national standard gb/t470-2008;the raw material aluminum ingot all uses the high-quality aluminum ingot, the aluminum ingot purity is high, the aluminum content above 99.8%, strictly carries out the national standard, the remelting uses the aluminum ingot gb/t1196 - 2008 Characters 1. Zinc aluminum alloy coatings have similar stability with spraying aluminum coatings and the electrochemical protection as well as spraying zinc coating, zinc aluminum alloy coating is an ideal anticorrosion protective coating of sea water. 2. Compared with the zinc wire and pure aluminum wire, it's coating has coherence, the resistance to wear and corrosion resistivity is better as well as the construction of superior performance. The zinc aluminum alloy wire makes the sacrifice anode and sprays coating in the steel and iron component surface layerand it make the component service life lengthen 5-10 times Specification Composition: zn/al 85/15 Diameter:2.0-10mm Package:20-150kg/bundle , 20kg/spool , 50-250kg/barrel(drum) Application Zinc aluminum alloy wire is widely applied to thermal spraying anticorrosion, container, bridge, head frame, storage tank, electric iron tower, poles and towers, capacitor, metal bracket, nodular cast iron pipe, traffic equipments, etc.
Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Materialadopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Here we provide 7 types of most competitive wire bonder, 4 Types of manual wire bonder, and 3 types of automatic wire bonder. And the 3 automatic: automatic thin aluminum wire bonder MD-Etech1850(18-50um aluminum wire); automatic ball bonder MD-S800(15-50um Au or alloy wire); automatic heavy wire bonder MD-CWX-3710(125-500um Aluminum wire). The most competitive 4 types:thin aluminum wire wedge bonder MDB-2575(25-75um aluminum wire);Wire wedge bonder MDB-25125(25-125um aluminum wire); heavy aluminum wire wedge bonder MDB-7550(75-500um aluminum wire);gold wire ball bonder MDBB-1750(17-50um gold wire). they are very popular for samll quantity production, school,institution,research department.
Product name Aluminum wire Place of origin Shandong, China Payment method T/T, L/C Packaging Standard sea package or as customers' requests
Alluminium wire 99.7 % pureity
Carbon Steel Ball
Aluminum Clip Wire Good Sealing Aluminum Clip Wire Customized Aluminum Clip Wire Good sealing, can be customized to any size and hardness. Cheap but guaranteed quality. Product Description Wire Gauge Carton size(m) Carton weight(kg) 1.7 0.325*0.325*0.225 20 1.9 0.325*0.325*0.225 20 2.0 0.325*0.325*0.225 20 2.05 0.325*0.325*0.225 20 2.07 0.325*0.325*0.225 20 2.1 0.325*0.325*0.225 20 2.2 0.325*0.325*0.225 20 2.3 0.325*0.325*0.225 20 2.45 0.325*0.325*0.225 20 2.7 0.325*0.325*0.225 20 2.9 0.325*0.325*0.225 20 3.2 0.325*0.325*0.225 20 Aluminum wire clips As sticks or on spools, depending on machine For all bags, netting and casings, The wire is used in KAP, ADP Japan, KP America or round-wire tying machine, quality assured, (purity of the aluminum is 99.7% ) Silver is the standard color (more on request) Various hardness grades Aluminum and alloys We can customize the size of the clips you need Further clips can be found here: R-Clip, S-Clip, P-Clip We have for many years now been developing trade and industry packaging solutions using the clip. Our type of packaging is suitable for the widest range of applications sausage, poultry, food or non-Food. We will be happy to advise you and find the right clip for your product and the casing being used! Please contact us
The Raw Materials for the Clips Raw Materials For Aluminum Clip Wire Raw Materials For Aluminum Clip Wire Manufacturer Size standard, factory price. high surface smoothness, without damage,can be customized Product Description The raw materials for the clips The wire has a high surface smoothness, precision micromachining, without damage. All types of the materials wire can be customized. we have all types of clips materials such as S730, S740, E210, E220, etc. Â because of advanced technology, the price is affordable, so that manufacturers of clips reduce costs while improving their own income, If you need it, please contact us.
We procure from manufacturers who manufacture wire rods in a continuous casting and rolling process. Electrical conductor (EC) wire rods are used for the production of cables and ACSR and AAC conductors. Alloy wire rods are used to produce AAAC conductors.
Aluminium Wire - Coil Purity: 99.80% Diameter: 1.8mm Weight: 10Kg / Coil Made in Indonesia Applicable for Metalizing and Non Metalizing Wire
Purity: 99.90% min H18 Diameter: 2.0mm Weight: 10Kg/Spool Made in Indonesia Applicable for Metalizing Wire
Aluminium wires.
Aluminum enameled wire.
Welding wire: 1. Aws er70s-6 from 0.6mm to 1.6mm 2.Aws e71t-1, 1.2mm and 1.6mm 3.Aws e6013 from 2.0mm to 5.0mm, aws e7018 from 2.5mm to 5.0mm.
