The Foam gun is easy to use because it is designed ergonomically. With the locking screw, the discharge volume is easy to control. Because it has a tapered nozzle, hard tp reach areas such as ceilings, narrow grooves or holes, can be filled correctly with ease.
Plunger type: 3-plunger type Dimension(l x w x h) mm: 400 x 270 x 410 Weight kg: 21 Plunger size mm: 26 x 30 Diameter of v-pulley mm: 254(b-2) Lubricantion oil capacity l: 0.9 Rpm continuous rpm: 800 Max rpm: 1300 Pressure continuous kg/cm2: 25 Max kg/cm2: 35 Discharge capacity continuous l/min: 38 Max l/min: 62 Power continuous p.S: 3.5 Max p.S: 1.5 Tank cap acity l l Iso-14001, iso9001:2000
using undiluted solution. Very stable and quick effect occures when undiluted solution sprayed. The product is very light in weight wise so it can be used anywhere with less labor. ISO 9001 : 2008 (Q329711)
Product nameAuto Sensor Fan Insect Control Sprayer (new) ModelSOL-Power300-3 Standard75 A Body-Auto Autofan for Spraying two each Frost-Proof Control Box System Tank 400 (L) Four-cycle Key Start-Up Engine 4.8 (kw) Hose Reel Set- 10 x 100(M) Dimension70 cm (L) x 110 cm (W) x 150 cm (H)
The chemical is not supplied to coil for the coil component life increased. It supplies through "The Chemicals supply pipe" into "the bundled discharge", in order to avoid to combustion in the Coil inside.
Product name75A Engine Mounted Spray Carrier ModelSOL-AE117-4 Standard Four-cycle Gasoline Engine Key Start-Up 4.8 (kW) 75ABody-Auto High-Pressure Hose(10 x 100M) Tank 200 (L) Dimension 1200cm x 1000cm (W) x 1300cm (H) Weight115(kg) Application Used for forest-fire fighting, sterilizing barns, facility houses, government offices, and floor cleaning MaterialSteel square pipe, antirust painting treatment, FRP tank FeaturesA tank and a high-pressure sprayer integrated equipment and moveable type Fixed front wheel 12 rear wheels-powered sprayer mounted with autopressure controller, eight pieces of rotating bearings, Keyang 710 Key Start-Up engine, FRP tank
Towed trailersSOL- GAMMA 400 SET Size(L x W x H) (mm) BODY3600 x 1800 x 550 Load Weight (kg)3500 Pump flow(L/min)0~300 Pump pressure (bar)0~25 Suction diameter(mm)65 Discharge diameter (mm)40~65 Power (H.P)23, 4 stroke aircooled 4cycle Pump set size(L x W x H)(mm)800 x 1100 x 950 Pump set Weight (kg)110 Manual hosereel10(mm) x 100(m) Water tank (L)3000 Water tank Size (L x W x H) (mm)(2000) 1420 x 1490 x 1250(1000) 1100 x 1300 x 960 Aerial lift size (L x W x H) (mm)1000 x 800 x 1500 Lift hight size Hi(mm) x Low(mm)Hi (1000) x Low (500) Nozzle Spray Maximum(m)Middle (m) Lowest (m) Middle (m) Lowest (m) Spray nozzle away0~35 ISO 9001 : 2008 (Q329711), ISO - 14001 , ABS, NEP, CE, TS16940
Product nameFour Seasons Unattended Pest Control Sprayer for Vehicles (New) ModelSOL-A1004-2 StandardMachine Room with Thermal Insulation Panel Sensor Control Box Motor 2.2 (kw) Built-in hot wire U Type Nozzle 1SET Windbreak *two each Tank 400 (L) 75 A Body-Auto two sets DimensionBody : 1000 x 1200 x 1500 Windbreak : 1100 x 1800(2SET) (L x W x H)(cm) Weight110(kg) FeaturesAvailable all year round under the condition of temperature from 0 to -20¡ÆC due to the frost-proof equipment Water tank temperature is always maintained above 30¡ÆC by specially designed machine room device Clogging due to waste of nozzles and freezing is completely removed by the powerful automatic generation of water Moveable machine room can be installed anywhere users want
High performance high pressure Sprayer does a to and fro motion 900 times in a minute. It has to eb added oil and greek to prevent the heat. non-greek ceramic sprayer blocks the impurities mixed with the original one.
Eco-friendly Nonpollution Compressed Insect Control Sprayer ModelSOL-B1004-2 StandardStainless Steel Tank 70(L) Auto Adjustable Air Compressor Remote Control Carrier (operation for four to six hours per charge) Spray Method: dc 12 (V) / 90 (AH) Air-Compressed Dimension110 x 45 x 70 (L x W x H)(cm) ISO 9001 : 2008 (Q329711)
4 cycle gasolin use, less noise and vibration, none polution, can be used in sealed room. light weight because of Chemical tank and all in one. Strong suction force.
Product nameAuto fan Insect Control Sprayer (new) ModelSOL-Power300-2 Standard75 A Body-Auto Motor 2.2 (kw) Autofan 0.75 (kw) x one each Tank 400 (L) Frost-Proof Control Box System Weight 120 (kg) Dimension70 cm (L) x 110 cm (W) x 150 cm (H) ApplicationPest control sprayer for foot and mouth disease prevention, emergency disease prevention, facility houses, barns, etc. FeaturesWalk-carrier, fan and moveable type are integrated for easy installation; available for all year round
Product name75A Motor Mounted Spray Cart ModelSOL-AM103-4 Standard 75ABody-Auto Motor2.2 (kW) High-pressure hose 10 x 200M Walk-Carrier Dimension100 mm (L) x 50 mm (W) x 110 mm (H) Application Used for pest control in the barns, washing, forest-fire fighting, pesicides spraying, and fruits peeling MaterialSteel square circular pipe and square pipe /high- pressure Hose with 100 kg/cm2 rupture pressure, 75A autopowered sprayer, motor ac 220 V, 3hp, Fixed wheel FeaturesMotor driven sprayer, injection with 20~30kg/cm2 pressure by adjusting autopressue control valve Appearance A high-pressure sprayer, a motor, and high- pressure hose integrated equipment with wheels
Size: 98x30x30(cm) Engine start: Automatic Weight: 8/9.5kg Fuel: pure gasoline Sprayed capacity: aerosols-per 30, 20minutes, 800py control 400py control smoke-hour 30 aerosol disinfectant pest control at a rate Apply: pens, Schools, apartments, camps, villages, warehouse, gardening.
1) The solution tank capacity is big, spraying time is long, high work efficiency. 2) The spraying pipe system with multi-stage filtration, ensure operation process does not plug nozzle. 3) The spray rod adopts single point hanging balancing mechanism, effective balance 4) Spray rod rod rotating disc folding mechanism, lance lifting, stretching and folding, can be in the driving room by operating the hydraulic oil cylinder to control, convenient operation, energy saving. 5) Liquid liquid in the tank using water jet mixing, can guarantee operation in the process of spray solution concentration uniform and consistent. 7)Liquid medicine box, drip-proof nozzle is made of high quality engineering plastics manufacturing. as required