Filter Regulator Lubricator (Frl)

essure Regulators
• Inlet pressure 200 bar maximum
• Delivery pressure adjustable 1 to 10 bar
• Fluid media, non corrosive gases
o o • Temperature range -40 c to +70 c
• Body ports 1/4" / 1/2" npt female
• Pressure gauges 50 mm diameter
• Wetted area parts ultrasonically cleaned corrosion resistance
Test pressure is 50% above manifold pressure. Normal cylinder /
manifold pressure is:
2 Argon : 151 kg/cm
2 Helium : 151 kg/cm
2 Hydrogen : 151 kg/cm
2 Nitrogen : 151 kg/cm
2 Oxygen : 151 kg/cm
2 Carbon-dioxide : 60 kg/cm
2 Dissolved acetylene : 20 kg/cm
2 Ammonia : 25 kg/cm
2 LP Gas : 17 kg/cm
Model PV-R2101



Flashback arrester with non return valves
MATERIAL
•Varieties of non-corrosive materials to select from
•All materials confirm to IS specifications
•Materials compatible to fluids
•All materials environment friendly
MANUFACTURING
•Manufactured to exact drawing specification
•Threads confirm to IS specifications
•Total interchangeability within same type and size
CONNECTIONS
Standard in 3/8” BSP LH and RM
•Wide range of external, internal as well combination of threads, for
industrial & domestic usage
DESIGN ADVANTAGES
•Compatible materials
•No soldiered, brazed or welded joints
•Leak tight integrity
•No gas contamination
•Compact size
•Useful for all fluids
•Pressure suitability
•Maintenance free
TEST
•100% factory tested
•Factory test certificates available on demand
•Available in 2 models - 20 bar & 200 bar test pressure.


Flame Arrester
Mesh type MS Seamless body.
Available in ½”, ¾”, 1½” BSP


Line Regulators for Industrial / Commercial Piping
Pre-Reg 2 - 1"

Adjustable Regulator - High Pressure

LP Online Regulator - Low Pressure with nozzle or 3/8 BSPM

LP Online Regulator (Adjustable) - Low Pressure with 3/8
BSPM

With NCV adopter


As per customer

anifolds
Suitable for any number of cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2,
3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. We manufacture manifolds for all industrial gases in
stainless steel pipe and forged blocks. As depicted below :




For LPG in LOT or VOT Systems
Part No. 1171 to 1177
Suitable for any number of S.C.V. type cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm
(17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. As depicted below :



Multi Lock Bearing Adapter
cylinders fitted with self-closing valves to a high pressure system
through a standard M.E.C.V. thread with unreduced pressure and a
high flow rate. The adopters are fitted with a non return valve to ensure
that there is no return flow of LPG whilst cylinders are being
disconnected. The salient features of these adopters is the multipoint
locking mechanism which combined with a face seal ensures
that the adopter will not leak even if it is loaded off axis. The quick
disconnecting arrangement coupled with a safety interlock ensures
that the device can only be disconnected after turning off the gas flow.
Both adopters featured above are available in 22 mm and 25.6 mm
seats, and 3/8” or MECV outlet size.
Makes available : Kosan | Vel | Gasman
cylinders fitted with self-closing valves to a high pressure system
through a standard M.E.C.V. thread with unreduced pressure and a
high flow rate. The adopters are fitted with a non return valve to ensure
that there is no return flow of LPG whilst cylinders are being
disconnected. The salient features of these adopters is the multipoint
locking mechanism which combined with a face seal ensures
that the adopter will not leak even if it is loaded off axis. The quick
disconnecting arrangement coupled with a safety interlock ensures
that the device can only be disconnected after turning off the gas flow.
Both adopters featured above are available in 22 mm and 25.6 mm
seats, and 3/8” or MECV outlet size.
Makes available : Kosan | Vel | Gasman



Manifold Fittings for LPG

Manifold Lug MECV MS Adopter
• Union Pin Set With Nut
• Non return valve for VOT manifold
• M.S. Adopter 3/8” B.S.P.P.M. X Bull nose for FECV Nut. Available for
½" and 1" pipelines
• Bung: Manifold bung for F valve fitting size ¾” B.S.P.T.M or
½”B.S.P.T.M.

Standard Lot Size

Cyclone Burner
System B
Art No. 333501
•Cyclone flame burners are the most
efficient burners for brazing and soft
soldering •The rotating flame gives
an even and all-round heat transfer to
the pipe •Working pressure 2 bar
Hot-air
System B
Art No. 333401
•Hot-air burners with powerful wind
proof hot-air streams for heat
shrinking •3349 ideal for shrinking in
confined spaces and fibre optic
closures •Working pressure 2 bar
Soft Flame Burner
System B
Art No. 334191
•Soft flame design ideal for cable
work and other heat shrinking
applications •To heat the sleeves
efficiently but still soft enough not to
overheat the shrink material
•Working pressure 2 bar
Standard Burner
System B
Art No. 334401
•Standard burners with brush-type
flames for all kinds of soft soldering /
small heating applications •Silver
soldering about 615°C •Working
pressure 2 bar
Pin-point Burners
System R
Art No. 884204, 393802, 393902
•Pin-point burners with the finest flames for
precision work such as gold and silver forging
•Recommended working pressure 2 bar
Pin-point Burners
System R
Art No. 294102
•Standard burners with brush-type flames for all
kinds of soft soldering/small heating applications
•Recommended working pressure 2 bar
Neck Tubes
System R
Art No. 350101
Only for pin-point burner 884204
Neck tube Length, 78mm
Art No. 351102
Neck tubes made for high quality brass
Neck tube Length, 70mm
Propane Hoses
• Diameter 5 mm and 8 mm • EN 559 / ISO 3821
• Fixed connection type • BSP 3/8" LH connection
Regulators
Art No. 309129 Art No. 306119



Standard Lot Size