Asbestos Gland Packing

FMP 500 Expanded Graphite Packing Typical Applications : Valves Service Media & Conditions Used for Superheated Steam, Hydrocarbons, Non Oxidising Liquids & Gases, Hot Ash Dyes & Chemicals, Fuel Oil & Lub oil etc. Corrosion inhibitor for moving parts Supply Data : Size Range : 6 X 6 to 40 x 40 mm Form : Square

Non Asbestos Gland Packing-Ferolite Gland Packing

Supplier: Spiral wound gasket, asbestos, rubber sheet, graphite, PTFE, gland packing

Supplier: Make non asbestos & asbestos gasket jointing sheets & packing, asbestos to non asbestos gasket jointing sheets, gland packing, rope, cloth, asbestos jointing sheets, gland packing, rope, cloth seal off air, water, steam, oils, gases, solvents, hydrocarbons, acids, alkalis

Supplier: Bubble level, level gauge glass, asbestos jointing sheet, gland packing, turcite b sheet, asbestos cloth, asbestos tape, asbestos rope

Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.

Supplier: Compressor spares, all types of clutches (custom made also we can offer), non-asbestos gland packings, industrial valves

Reflex gauge glass is used to read the medium level in the boiler or other tanks. The one side of the glass which is exposed to the medium has a prismatic surface and another side is smooth. The medium level inside the level gauge is indicated as the result of the light refraction principle, since the liquid filled area completely absorbs the rays of light and appears dark, whereas the rays of light are totally reflected in the gas/air filled area which appears bright. Reflex gauge glass is made from high borosilicte glass. It has many advantages, such as cheap, low maintenance cost, easy level reading and excellent high temperature & pressure resistance. Its working pressure can be up to 4 MPa and working temperature can be up to 430 C. The edge can be polished or frosted.

Transparent glasses are also manufactured from extra-hard borosilicate glass. The surfaces on both sides are finely smooth and ensure optimal transparency. Now we have two kinds manufacturing technique: 1.One is as same with reflex gauge glasses, use molds to make the semi-finished products, afterwards, ground and polish the two side to ensure optimal transparency. By this manufacturing technique, the definition isnt good. 2.The other manufacturing technique is: At first, we manufacture 17mm thickness glass sheet, then cut the glass sheet according the detailed size and polish the side face for the smooth. This manufacturing technique glass is very clear, but the goods cost is higher. It can be used with all media except steam at service conditions up to 6MPa and temperatures up to 260 °C.