Sml Din En877 Cast Iron Pipe Fittings

Pipe fittings confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300

The pipe fittings produced by our company have smooth surface, high density, no white,
High strength, light weight, reasonable design in structure,
beautiful externality used on high buildings and environmental protecting,
strength corrosion-resistant coating for fittings

SML DIN EN877/ISO6594 two-part epoxy resin painting fittings

Internal and external painting: two-part epoxy resin painting, with an average dry thickness of 60-150 microns


KML DIN EN877/ISO6594 Gray two-part epoxy resin powder coating fittings

Internal and external painting: Grey two-part epoxy resin powder coating fittings, with an average dry thickness of 250 microns



All pipe fittings are produced according to standard DIN19522/EN 877/ISO6594 and not inflammable and not combustible

Cast Iron Pipe confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The gray cast iron soil pipes produced by centrifugal technology which are used
in drainage sewer system and ventilation ducts system through a flexible linkage.
which have following advantages :flat straight,even pipe wall.
high strength and density,high smoothness internal and external surface,
no casting defect, easy installation, easy maintain, long using life,
environmental protecting,fireproofing and no noise.

Cast Iron Pipe confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The gray cast iron soil pipes produced by centrifugal technology which are used
in drainage sewer system and ventilation ducts system through a flexible linkage.
which have following advantages :flat straight,even pipe wall.
high strength and density,high smoothness internal and external surface,
no casting defect, easy installation, easy maintain, long using life,
environmental protecting,fireproofing and no noise.

Cast Iron Pipe confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The gray cast iron soil pipes produced by centrifugal technology which are used
in drainage sewer system and ventilation ducts system through a flexible linkage.
which have following advantages :flat straight,even pipe wall.
high strength and density,high smoothness internal and external surface,
no casting defect, easy installation, easy maintain, long using life,
environmental protecting,fireproofing and no noise.

These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.

Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.

Packing: Loose in container

Loading: in 20 Container

For further information, please feel free to contact us.

Cast Iron Skulls

Cast Iron and Ductile Iron tube and fittings PL739

Cast Iron and Ductile Iron tube and fittings can be offered by our comapny to meet different engineering needs.

The difference between ductile iron and gray iron

1. Different chemical composition

Nodular cast iron contains nodular graphite, which can improve its toughness and strength, while reducing brittleness. Gray cast iron contains a lot of carbon, so that its hardness and wear resistance is high, but the toughness is poor.

2. Different organizational structures

The structure of nodular cast iron contains nodular and ferrite, and the distribution of nodular is uniform. While the structure of gray cast iron is mainly ferrite and pearlite, and the distribution of pearlite is uneven.

3. Different performance

Ductile iron has high strength and toughness, and has good corrosion resistance. It is uitable for the manufacture of high load and high pressure parts. The hardness and wear resistance of gray cast iron are high. It is suitable for the manufacture of friction and wear parts.

Application field
Cast iron : because of its low strength and good vibration resistance. It is often used in the production of parts under compressive stress, such as box, base, etc.
Ductile iron : because of its high strength and good toughness. It is often used in the manufacture of parts requiring high strength and toughness, such as crankshaft, connecting rod and so on.

Ductile iron pipes (DN100-2000) and fittings available from China. ISO certificates and testing documentation available.

We are a unique entity in this industry, actively engaged in offering a premium quality array of Cast Iron Casting