Helical Fittings

Supplier: Over head line fittings, helical/preformed fittings, guy grip /tension dead end, armor rods, eyenut

Supplier: Equipment clamps/terminal connector, suspension clamps, strain clamps, link fittings, t clamp, substation fittings, guy wire fittings, cross arm hoop, optical fiber cable fittings, substation fittings, guy wire fittings, preformed helical fittings, suspension insulated conductor fittings, splicing fittings

Wire wrapped screen consists of a wire-wrapped jacket and a perforated pipe. Keystone shaped wire are helically wrapped around the vertical ribs and each point of contact is welded. This special shaped wire is designed for decreasing the chances of sand plugging the screen, self-cleaning action and reducing flow friction. The diameter and Very accurate slot opening; Rotating ability during installation; High strength and superior corrosion resistance; Keystone shaped wire provides maximum erosion resistance & strength; Higher number of round ribs gives ultra-high strength and tolerance for the service life; Larger inflow area than slotted liner for maximum production; All api and ansi pipe sizes are available; Customized end fittings and thread connections. Wire wrapped sand control screen construction Wire wrapped screen structure

Pipes & ducts are manufactured using the "dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to nd150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. Is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.

Extruded Fin Tube Fin material: Aluminium 1060,1050, 1070, 6063,6061,3003 fin type: extruded, Fin size: OD25mm~OD85mm, fin thickness:0.25mm~1mm, fin per inch: 5~12; Fin Length: 300mm~18000mm; Base tube material: SA179, SA789 S31803, SS304,SS316L, SA334, SA249, C44300, C68700, C71500, C70600, C12200, UNS8800,UNS4400, IN825,Titalium etc. Manufacture: A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube. Application: *Air water cooler unit *Product coolers - gas, chemicals, petrochemicals, oil etc. *Heat exchangers *Boiler,Dryer *Air condtioner, Air condenser

Supplier: Inserts, cpvc upvc fittings &ppr fittings, male female inserts, bsp/npt inserts, cross knurled inserts, helical knurled inserts, press lock type inserts, self tapping inserts, straight knurled inserts, tappex type inserts, plastic moulding inserts, valve, sanitary tipton fitting
Services: