Stainless steel bars
1)stainless steel ingots & billetssize range:6µµx 8µµ, 7µµx 8µµ, 8µµx 9µµ , 9µµx11µµ , 10µµx12µµ , 12µµx16µµ, 12µµx16µµ, 17µµx19µµ.120 mm x 120mm, 140mm x 140mm, 160mmx160mm.Process:direct melting of scrap with medium frequency induction furnace.
Grade200 , 300 , 400 en- series f5 , f9, f11, h-11 , h-13 , all alloy steel grades and as per clients specific composition.Usage:for rolling & forgings.
2)stainless steel black bars:size range:
16.00mm to 100.00mm
Process:rolled and annealed
Grades:201, 202, 303, 304 , 304l , 316 , 316l , 321 , 410 , 416 & 420.3)stainless steel bright barssize range:
4.00 mm to 100.00mm( 1/8µµ to 1 / 4µµ dia )
Process:
Annealed, cold drawn, centre less ground, smooth turned &polished.Tolerance:
H-9 , h-11.Grade:
201, 202, 303 , 304 , 304l , 316 , 316 l , 321 , 410 , 416 , 420 & as per customers specific composition.Usage:
Nuts, bolts, pump shafts, valves, fasteners, food equipments, bushes screws, chemical plants and appliances etc.
4)stainless steel hexagon and squares:
Size range: 10.00 mm to 56.00 mm (3/8µµ to 2.1/4µµ dia)process: annealed, pickled, cold drawn, &polished.Tolerance:
H- 9 , h-11.Grade:
303, 304, 304l, 316, 316l.Usage:
Nuts & bolts.
5)stainless steel weaving wires:
Size range: 1.00 mm to 5.00 mm(0.04µµ to 0.20µµ dia )
Process:bright annealed.Tolerance:h-9, h-11.
Grades :201, 202, 304, 304l, 316, 316l, 410.
Usage: weaving wires v suitable for application in chemical, petrochemical, , synthetic &conveyor belts operating at high temperatures.Conditions of supply:
(1)soft
(2)quarter hard
(3)half hard.Production facilities1)scrap heating furnace
2)steel melting shop
3)casting facilities
4)rolling facilities
5)bright bars and drawing facilities
3mm to 160 mm
A)Product Specifications BARS Size Range : 36 - 110 Mm Length : 3 - 6.5 M Supply Condition : Hot rolled, annealed, hardened and hardened + tempered GRADES AISI: 201, 202, 301, 303, 304, 304H, 304/304L, 316, 316H, 316/316L, 309, 309, 309S, 310, 310S, 316Ti, 317, 317L, 321, 321H, 410, 416, 420, 430, 430F, 431, 17-4PH, F51 and F60. *Specialised grades also available as per customer requirements. B) PACKAGING: Packing is done using a variety of protective materials and distance rings, and then placed in the strong plywood boxes to ensure safety of material during transportation
A)CAPACITY: 12,000MT B)EQUIPMENT: 2 pre-straightening units. 2 combined drawing units with a speed of 55 m/min. 2 straightening units. 2 vertical type roll straighteners. 2 polishing units. C)PRODUCT SPECIFICATIONS Bright Bars Size Range : 5 - 16 Mm Length : 3 - 6.2 Finish : Cold drawn Tolrance : H9, H10, H11, H12, K12, K13 Supply Condition : 3 - 10 mm annealed + cold drawn + polished Square : 6 - 12 mm Finish : Mirror finish Tolrance : H11 Supply Condition : 11 - 22 mm annealed + cold drawn polished/centerless ground Hexagon : 6 - 13 mm Tolrance : H11 Supply Condition : 23 - 110 mm annealed/hardened + tempered + smooth turned + polished/centreless ground GRADES AISI:201, 202, 301, 303, 304, 304H, 304/304L, 316, 316H, 316/316L, 309, 309, 309S, 310, 310S, 316Ti, 317, 317L, 321, 321H, 410, 416, 420, 430, 430F, 431, 17-4PH, F51 and F60. *Specialised grades also available as per customer requirements. D) PACKAGING: Each bar is colour coded and then wrapped in HDPE cloth.
Our Offerings Grade : 202, 303, 304, 304L, 309, 310, 316, 316L, 316TI, 317, 317L, 321, 410, 416, 420, 430, 440C, 904L, etc. : 6 mm to 400 mm diameter : ASTM, GB, JIS, DIN, etc. : Round, Rectangle, Square, Hex, Angle, Channel. Applications: Construction Industry Manufacturing Industry Automotive Industry Aerospace Industry Architectural design and engineering. Food-grade production environments and utensils. Railway Industry Household items, fixtures and products. Medical supplies, machinery and surgical/hygiene tools.
Stainless steel bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2)
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2) Cold Finished Bars for precise engineering Hardened & Tempered (QT), Solution Annealed & Soft Annealed bars, are produced in standard and customized lengths for demanding, applications like Cylinder Shaft, Pumps & Valves and Oil & Gas, Industry. Bars for Free Machining Austenitic, Ferritic and Martensitic free machining grades are produced, with Calcium Silicide (Ca-Si) treatment. Sulphur levels of 0.15-0.35%, are maintained for improved machining and better tool life.
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2) Cold Finished Bars for precise engineering Hardened & Tempered (QT), Solution Annealed & Soft Annealed bars, are produced in standard and customized lengths for demanding, applications like Cylinder Shaft, Pumps & Valves and Oil & Gas, Industry. Bars for Free Machining Austenitic, Ferritic and Martensitic free machining grades are produced, with Calcium Silicide (Ca-Si) treatment. Sulphur levels of 0.15-0.35%, are maintained for improved machining and better tool life.
Stainless steel bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2)
1Cr11Ni2W2MoV steel is a kind of ferrite forming element which reduces the austenite phase region, such as W, Mo, V, etc., in the low carbon 12% Cr steel, so that the steel has martensite transformation hardening ability, and the obtained one New martensitic heat resistant stainless steel. The steel has good comprehensive mechanical properties and has been widely used in the aviation industry to manufacture important parts such as engine blades, discs and shafts operating below 600 °C.
Grade:ASTM 303,304/L,316/L,321,316Ti, 310S,309S, 201,202,205,204+Cu,410,420,430,446 and Other as per customer's requirement Size: dia1-500mm Finish: cold drawn,peeled, bright finish Package: plastic and woven pack or wooden box Payment: TT30% down payment the balance before carrying Mill test Certificate supplied 1mm-500mm
Standard GB, AISI/JIS, SUS, UNS, DIN 17440 17220(BS970 Part4) Material 201 202 204 207 207CU 301 302 303 303B 304 304L 304N 308 308L 308 LSI 309 309L 309LSI 309S 309SI 310 310S 314 316 316L 316LSI 321 330 347 348 384 410 420 430 OD 1.0-400mm Length 3000mm, 6000mm or according to the customer's requirement. Place of Origin Jiangsu Brand Name HENGDA STEEL Type Round bar, square bar, flat bar, hexagon bar, angle bar, channel bar, threaded bar Use Petroleum, chemical, construction, textile, medicine, aviation, aerospace, railway, highway, landscape protection, metallurgical machinery and other fields. Certificate ISO9001 Specifications Surface bright,pickled,black Technique Forged/Hot Rolled/Cold Drawn/Peeled Category 1.Round bar 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. 2)Acid round bar: (5-400)x6000mm or according to your requirement. 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. 4)Polishing round bar: (5-400)x6000mm or according to your requests. 2. Square bar 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests. 3. Flat bar 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 4. Hexagon bar 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. 5. Channel bar 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. 2)Acid channel bar: (5-100)x6000mm or according to your requests. 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests. 6. Threaded bar 1)Hot rolled threaded bar: (5-100)x6000mm or according to your requests. 2)Acid threaded bar: (5-100)x6000mm or according to your requests. 3)Cold drawn threaded bar: (1-20)x6000mm or according to your requests. 7. Angle bar 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. Diameter H9 tolerance can reach the industry standard Package.