Used rail r50-r65 / origin: canada-uk.- cis europe
Specifications and chemical composition: used rail: r50 (51.67kg/meter, gost 7173-55), used rail: r65 (64.72kg/meter, gost 8161-75). Size & weight: length: 12meter ~ 12.5meter maximum or less according to buyerâ??s instruction; width: 5.5 inches; weight: 64.72kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust.
Price 235 usd /mt
Payment: by dlc or sblc or irrevocable non-transferable documentary letter of credit payable 100% at sight
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Specifications :- used rails - R50/R65 Carbon (C): 0.54 0.082% Manganese (Mn) 0.75 - 1.05%, Silicon (Si): 0.18 0.40%, Phosphorous (P): Max. 0.035%, Sulphur (S): Max. 0.045%, Arsenic (Ar): Max. 0.15% Width: 0.5 m Iron Balance: Norms R50 Gost 7173-73 and R65 Gost-8165-75 R50(51.67KG/M)-Gost- 7173-75 R65(64.72KG/M)- Gost- 8165-75
Used Rail Available Supplier Worldwide
Scrap Steel to be supplied under the present contract shall conform with the steel scrap specifications and standards of the Institute of Scrap Recycling Industries (ISRI) and SGS INSPECTION will be made at the discharge port after arrival of the vessel at the unloading port and shall be strictly limited to used rails and scrap steel to the standards specifically set out below: a) R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. b) R65: used long rail steel scrap in compliance with ISRI standard classification R65 (64.72 kg/m), in length 1 & 1,5meters on per bar basis, Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. c) Clean scrap without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine, vehicles, and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive or armor-plated materials, excess rust, corrosion, dust and dirt, mud or wastes and without any harmful impurities and totally free of radioactive contamination and poisonous material and any other materials exceeding the level accepted and allowed by international acceptable norms.
The chemical composition is the standard for R50 & R65 rails, original weight 50 pounds per yard or heavier, 6 meters long and over. Material to be suitable for re-rolling into bars and shapes. Free from bent and twisted Rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of a piece of rail. Free from fluff, non-ferrous inclusions excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances and coatings any organic waste, any other harmful substances. Dirt, dust, rust, fluff and other impurities not allowed over 5%. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.
We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : LC AT SIGHT Destination : ASWP CIF Monthly capacity : Any quantity. MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $240 Nett 200,000*12=$235 Nett 300,000*12=$230 Nett 400,000*12=$225 Nett 500,000*12=$220 Nett
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : DLC - MT 700 payable at buyer's destination port. Destination : ASWP CIF Monthly Capacity : 5,00,000 Mt MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $225 Nett 200,000*12=$220 Nett 300,000*12=$220Nett 400,000*12=$215 Nett 500,000*12=$210 Nett *Negoiatable No overpricing We can arrange other Origins also such as Poland, South Africa, Kenya, Philippines, Thailand, etc. For all origins, Docs required LOI with bank details or ICPO BCL or Draft LC or Verbiage or equivalent docs to check clients financial ability. Pymt terms : LC/ DLC/ SBLC payable at buyer's destination port.