Wire With Pvc Tube Welding Machine

Width :1.5m could welding 4 feet ,3feet
Mesh opening; 17*17mm the wire diameter 1.2-2.0mm
Mesh opening: 34*34mm the wire diameter 1.2-2.6mm
Welding speed:75-90 rows/min
Roll mesh length: about 100 meters
Power: 415V 50HZ
Welding copper: single row diameter 12mm.
Transformers: 85KVA*4
Welding control cabinet: diphase control( there are four 500A silicon control)

Wire welding mesh machine
----electric machine
wire diameter is 3-6mm, the mesh size: length 3m/6m x width 2.5m
----pneumatic machine
wire diameter is 4-8mm or 6-10mm, the mesh size: length 3meter/6m x width 2.5m

the machine can be customized as different requirements

Function characteristics of the automatic mesh panel welding machine : firm welded point and without welded tracks . Not only welding speed is fast but also it is easy to learn and operate .
Welding transformer of the automatic mesh panel welding machine has eight shifting grades that expand welding wire diameter range .

Both line wire and cross wire are fed from coil wire automatically .
Use of the automatic mesh panel welding machine : welding estazolam plate mesh panel , wire mesh panel , floor warming mesh .

The automatic mesh panel welding machine has 25 pieces of wire bracket , one work table , one electric clipper , one repair welding apparatus .
The rated voltage and transformer condition of the automatic mesh panel welding machine : the rated voltage is 380V , 50HZ , the transformer supporting is 50 KVA (minimum) , the distance between the automatic mesh panel welding machine and the transformer supporting is 50 meters , the electric wire is 90 square millimeter ; the distance between the automatic mesh panel welding machine and the transformer supporting is 100 meters , the electric wire is 120 square millimeter ; the distance between the automatic mesh panel welding machine and the transformer supporting is 150 meters , the electric wire is 150 square millimeter . the farthest distance between the automatic mesh panel welding machine and the transformer supporting is 150 meters .
Main parameter of the automatic mesh panel welding machine



We supply installation and trial run for our automatic mesh panel welding machine .


1 container.

Our main products: 3d panel machine line, EPS machine line, wire mesh welding machine line, automatic expanded metal mesh machine, wire straightening and cutting machine and so on. In addition to the standard specification, we also accept special requirements from our customer, so please come to us if you have the needs.

Wire mesh welding machine (gwc2500) characters:
¡ñ for the production of reinforcing mesh in standard size and special mesh specification, the material can be hot rolled wire and cold rolled wire.
¡ñ welding system: the welding pressure by using energizing air cylinders (international famous brand) can ensure high welding speed, high quality of welding point.
¡ñ patented welding circuit design can ensure to weld ¦µ 12mm hot rolled deformed wires.
¡ñ cross wire feeding system: driven by servo motor, equipped with new type chain feeding unit ensures the cross wires are precisely positioned on the line wires.

Wire mesh welding machine (gwc2500) specification:
Model: gwc2500
Max. Mesh width(mm): 2500 [mm]
Line wire spacing(mm): ¡ý 100 [mm], multiples of 50 [mm]
Cross wire pitches(mm): ¡ý 50 [mm], steplessly adjustable
Line wire diameter(mm) : 5 - 12 [mm]
Cross wire diameter(mm) : 5 - 12 [mm]
Max. Welding capacity (mm) : 12 + 12 [mm]
Max. Working speed (row/min) : 60 - 100
Welding electrode no¡ã : 24
Installed power - welding (kva) : 12*100 [kva]


Standard export packing

Model: DNW315-1500-25
Mesh width: 1000-1500 adjustable.
Mesh length: 6m for mesh sheet or 120m for mesh roll
Warp wire distance: 25-300mm adjustable
Weft wire distance:25-300 adjustable
Electrode number: 61 sets
Welding wire diameter: 1-4mm
Wire material: stainless wire or low carbon wire
Wire surface: clean, or galvanized
Welding speed: 80times/min
Capability: 80strokes/min
Total power: 63KVAX5=315KVA
Air press: 0.6Mpa.

Feature :

1. Special for PVC Inflatable welding
2. Press board installed
3. 3 pedals to operate .It is remote control the operation
4. Can be design as requirement


Technical Data :
MODEL: CN-75KWTMAXPRESSURE: 2000KG
POWER: 75KW MAX GAP OF ELECTRODES: 150MM
POWER SUPPLY: 220/380V*3P 50/60HZ SIZE OF ACTIVE HORN: 150MM
FREQUENCY: 27.12MHz SIZE OF UP ELECTRODE: 2100*2600MM
ELETRONIC POWER: 100KVA SIZE OF WORKING TABLE: 2200*2800MM
RECTIFIER: SILICON DIODE NET WEIGHT: 10T
VIBRATIONAL TUBE: 9T94A WELD TIME: 0-10s Adjustable
DRIVEN MODE: Pneumatic FORESEEN PRODUCTIVITY: 2000PCS/8Hour



Introduction :

1. Welding for different thickness PVC film material.

2. Welding and connecting for material with big length.

3. 5557 sparking device can protect mold.

4. Different machine with different output power can weld in different length.


Advantage :

1. Normally, the hf power range from 5kw-180kw

So different requirements decide the different output power.

2. There is big space designed specially for putting material conveniently

3. Special grounding device makes the machine more stable.

4. It adopts coaxial output tuner which makes the output powerful. Meanwhile,

5. It adopts 5557 sparking device to protect mold well.

6. The welding time can be adjusted according to different material and thickness


Application :

CN-75KWT Inflatable Welding Machine is special for inflatable hot tub, inflatable snow tubes ,inflatable tube slides welding. It is widely used for welding inflatable floating island, inflatable jump bed ,inflatable castle, inflatable slides, inflatable water slides, inflatable water park, inflatable pool slides ,inflatable bouncy castle, inflatable water trampoline , inflatable water roller , welding and jointing.


Pre-sales service

1. Help you find the suitable machine for your product.
2. You are always welcome to visit our factory.
3. 30%deposit
4. Machine manufacture and quality control during whole process.
5. Show you the finished product.

After-sales service

1. Get your confirmation before delivery.
2. Balance payment against T/T or B/L.
3. Timely solve your working problems.
4. If necessary, we will send technician to guide you for machine usage.
5. Two year quality guarantee for the machine

Posts are manufactured conforming to FHWA and ATSSA standard.

Steel material conforms to ASTM A1011, Grade 50.

Yield strength after cold-forming is 60,000 psi minimum.

�· Posts are manufactured conforming to ASTM A653, G90 or G140. The posts are also coated with a chromate conversion coating and a clear organic polymer topcoat.

�· Punching with 7/16" holes on 1" centers on all four sides down the entire length of the post.

�· Five kinds of cross section including 1.50''X1.50", 1.75", 2.00", 2.25", and 2.50"X2.50".

�· Available in 12 and 14 gauge thickness with all kinds of length according to your demand.

Powder coated sign posts with all kinds of colors are also available.

We have been able to offer Wire Butt Welding Machine in national market in various technical features.

We offer a complete range of Wire Butt Welding Machines that are suitable to weld mild steel, high carbon steel, copper, aluminum wires etc.

Features :
* Trolley Stand
* Spring Loaded Clamping Devices
* Foot Pedal Release