Gloss Black Aluminum Composite Panel

EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)

Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements

Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me

Aluminum composite panel We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.

Techniques and methods for edge folding and grooving of Aluminum Composite Panel Aluminum Composite Panel is widely used, most of the time have to fold, today as the old xingda aluminum workers xiaobian to explain how to better under the aluminum plate folding. First of all, we all know that the premise of aluminum-plastic plate folding aluminum foil is thick enough, the thicker the aluminum skin, the better the frilled edge, before the aluminum-plastic plate folding, first we must from the back of aluminum-plastic plate with slot machine, trimming machine), open a groove, otherwise can't frilled edge, the depth of the slot is according to the thickness of the aluminous model to adjust, the tool bit shorter, first try, slowly until seemed dew aluminum skin not dew, deep cause ruffled fracture easily scratch the aluminum skin, light the bad side of easy to crack.

Sustainable Development Of Aluminum Composite Panel Industry In order to the healthy and sustainable development of the Aluminum Composite Panel industry, we must take the comprehensive, coordinated and sustainable scientific development concept as the guidance and do a solid job in the following aspects. 1. Efforts must be made to improve product quality: product quality is the life of an enterprise and the foundation of industry development. We must change our tendency to emphasize quantity over quality and concentrate on product quality. 2. Aluminum production and integrating market demand: the main purpose of the aluminum-plastic plate is used as a building curtain wall and wall decoration, so the development of aluminum-plastic plate for construction, the demand of the architectural decoration industry as the leading direction, will closely combine with construction, building decoration industry, to the road of common development and common prosperity. 3. Give full play to the role of the association: the association should establish the scientific development concept, enhance the service function, promote the sustainable, rapid, coordinated and healthy development concept of the aluminum plastic plate from Aluminum Composite Panel Manufacturer, give full play to the association's function of bridge, coordination, service and self-discipline, and create a good environment for the development of the aluminum plastic plate industry. 4. Actively carry out technological innovation activities to promote the technical progress of the aluminum and plastic board industry: technology is the basis for the development of the aluminum and plastic board industry. Only continuous innovation and progress in technology can make the aluminum and plastic board industry last for a long time. Aluminous model board regards a kind of new-style adornment as decorating material, regard a kind of organic inorganic compound as material, although have a lot of outstanding performance, but still need to develop ceaselessly and progress, because the market and demand are not invariable, the technology is in ceaseless progress.

- High durability with aluminum surface coated with NANO technology - anti-dust and minimize water retention, as well as any impact of the environment. - Thickness range from 2mm to 7mm - Safe with fireproof material inside - Flexible, high bending, and also ensure the hardness to meet the specific requirements of each project - Rich in color, diversified in types of patterns with many types of wood, stone texture helps to replace natural materials. - Easy to install and install under all conditions

Partition panel (acp) Sheet thickness • 4.5mm • 4mm • 3.5mm • 3mm